EN 60811-501:2012/A2:2023

Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds

Kabel, isolierte Leitungen und Glasfaserkabel - Prüfverfahren für nichtmetallene Werkstoffe - Teil 501: Mechanische Prüfungen - Prüfungen zur Bestimmung der mechanischen Eigenschaften von Isolier- und Mantelwerkstoffen

Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non métalliques - Partie 501 : Essais mécaniques - Détermination des propriétés mécaniques des mélanges pour les enveloppes isolantes et les gaines

Električni in optični kabli - Preskuševalne metode za nekovinske materiale - 501. del: Mehanski preskusi - Preskusi za ugotavljanje mehanskih lastnosti zmesi za izolacije in oplaščenja - Dopolnilo A2 (IEC 60811-501:2012/AMD2:2023)

General Information

• Status: Published
• Publication Date: 07-Dec-2023
• ICS: 29.035.01 - Insulating materials in general
• ICS: 29.060.20 - Cables
• Technical Committee: CLC/TC 20 - Electric cables
• Drafting Committee: IEC/TC 20 - IEC_TC_20
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 08-Dec-2023
• Due Date: 18-Jul-2025
• Completion Date: 08-Dec-2023
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Ref Project: SIST EN 60811-501:2012/A2:2024 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds (IEC 60811-501:2012/AMD2:2023)

Relations

• Amends: EN 60811-501:2012 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds
• Effective Date: 02-Aug-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2024
Električni in optični kabli - Preskuševalne metode za nekovinske materiale - 501.
del: Mehanski preskusi - Preskusi za ugotavljanje mehanskih lastnosti zmesi za
izolacije in oplaščenja - Dopolnilo A2 (IEC 60811-501:2012/AMD2:2023)
Electric and optical fibre cables - Test methods for non-metallic materials - Part 501:
Mechanical tests - Tests for determining the mechanical properties of insulating and
sheathing compounds (IEC 60811-501:2012/AMD2:2023)
Kabel, isolierte Leitungen und Glasfaserkabel - Prüfverfahren für nichtmetallene
Werkstoffe - Teil 501: Mechanische Prüfungen - Prüfungen zur Bestimmung der
mechanischen Eigenschaften von Isolier- und Mantelwerkstoffen (IEC 60811-
501:2012/AMD2:2023)
Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non
métalliques - Partie 501: Essais mécaniques - Détermination des propriétés mécaniques
des mélanges pour les enveloppes isolantes et les gaines (IEC 60811-
501:2012/AMD2:2023)
Ta slovenski standard je istoveten z: EN 60811-501:2012/A2:2023
ICS:
29.035.01 Izolacijski materiali na Insulating materials in
splošno general
29.060.20 Kabli Cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60811-501:2012/A2

NORME EUROPÉENNE
EUROPÄISCHE NORM December 2023
ICS 29.035.01; 29.060.20
English Version
Electric and optical fibre cables - Test methods for non-metallic
materials - Part 501: Mechanical tests - Tests for determining the
mechanical properties of insulating and sheathing compounds
(IEC 60811-501:2012/AMD2:2023)
Câbles électriques et à fibres optiques - Méthodes d'essai Kabel, isolierte Leitungen und Glasfaserkabel -
pour les matériaux non métalliques - Partie 501 : Essais Prüfverfahren für nichtmetallene Werkstoffe - Teil 501:
mécaniques - Détermination des propriétés mécaniques Mechanische Prüfungen - Prüfungen zur Bestimmung der
des mélanges pour les enveloppes isolantes et les gaines mechanischen Eigenschaften von Isolier- und
(IEC 60811-501:2012/AMD2:2023) Mantelwerkstoffen
(IEC 60811-501:2012/AMD2:2023)
This amendment A2 modifies the European Standard EN 60811-501:2012; it was approved by CENELEC on 2023-12-07. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60811-501:2012/A2:2023 E

European foreword
The text of document 20/2128/FDIS, future IEC 60811-501/AMD2, prepared by IEC/TC 20 "Electric
cables" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-09-07
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-12-07
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60811-501:2012/AMD2:2023 was approved by CENELEC
as a European Standard without any modification.

IEC 60811-501 ®
Edition 1.0 2023-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 2
AMENDEMENT 2
Electric and optical fibre cables – Test methods for non-metallic materials –

Part 501: Mechanical tests – Tests for determining the mechanical properties of

insulating and sheathing compounds

Câbles électriques et à fibres optiques – Méthodes d'essai pour les matériaux

non métalliques –
Partie 501: Essais mécaniques – Détermination des propriétés mécaniques des

mélanges pour les enveloppes isolantes et les gaines

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.035.01, 29.060.20 ISBN 978-2-8322-7742-3

– 2 – IEC 60811-501:2012/AMD2:2023
© IEC 2023
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRIC AND OPTICAL FIBRE CABLES –
TEST METHODS FOR NON-METALLIC MATERIALS –

Part 501: Mechanical tests –
Tests for determining the mechanical properties
of insulating and sheathing compounds

AMENDMENT 2
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical comm
...