EN 62817:2015
(Main)Photovoltaic systems - Design qualification of solar trackers
Photovoltaic systems - Design qualification of solar trackers
IEC 62817:2014 is a design qualification standard applicable to solar trackers for photovoltaic systems, but may be used for trackers in other solar applications. The standard defines test procedures for both key components and for the complete tracker system. In some cases, test procedures describe methods to measure and/or calculate parameters to be reported in the defined tracker specification sheet. In other cases, the test procedure results in a pass/fail criterion. This standard ensures the user of the said tracker that parameters reported in the specification sheet were measured by consistent and accepted industry procedures. The tests with pass/fail criteria are engineered with the purpose of separating tracker designs that are likely to have early failures from those designs that are sound and suitable for use as specified by the manufacturer.
Sonnen-Nachführeinrichtungen für photovoltaische Systeme - Bauarteignung
Systèmes photovoltaïques - Qualification de conception des suiveurs solaires
L'IEC 62817:2014 est une norme de qualification de conception applicable aux suiveurs solaires pour systèmes photovoltaïques, mais peut servir aux suiveurs dans d'autres applications solaires. La norme définit les procédures d'essai destinées aussi bien aux composants clés qu'au système suiveur complet. Dans certains cas, les procédures d'essai décrivent des procédés servant à mesurer et/ou calculer des paramètres à rapporter dans la feuille de spécification définie pour le suiveur. Dans d'autres cas, le mode opératoire d'essai se conclut par des critères d'acceptation et de refus. Cette norme donne à l'utilisateur dudit suiveur la garantie que les paramètres rapportés dans la feuille de spécification ont été mesurés par des procédures industrielles cohérentes et acceptées. Les essais basés sur des critères d'acceptation et de rejet ont pour objet de distinguer les conceptions de suiveur susceptibles de présenter des défaillances prématurément de celles présentant la robustesse nécessaire et correspondant à l'usage spécifié par le fabricant.
Sledilniki sonca za fotonapetostne sisteme - Ocena zasnove (IEC 62817:2014)
Ta mednarodni standard je standard ocene zasnove, ki se uporablja za sledilnike sonca za fotonapetostne sisteme, vendar se lahko uporablja tudi za sledilnike pri drugih načinih uporabe sončne energije. Standard določa preskusne postopke za ključne sestavne dele in celoten sledilni sistem. V nekaterih primerih preskusni postopki opisujejo metode za merjenje in/ali izračun parametrov, navedenih v specifikaciji določenega sledilnika. V ostalih primerih je preskusni postopek uspešno/neuspešno opravljen.
Cilj tega standarda ocene zasnove je dvojen. Najprej ta standard zagotavlja uporabniku navedenega sledilnika, da so parametri v specifikaciji izmerjeni na podlagi doslednih in sprejetih industrijskih postopkov. To zagotavlja odjemalcem trdno osnovo za primerjanje in izbiro sledilnika, ki ustreza njihovim posebnim potrebam. Ta standard določa definicije in parametre v celotni industriji za sledilnike sonca. Vsak dobavitelj lahko oblikuje, zgradi ter določa funkcionalnost in točnost z enotno definicijo. To omogoča doslednost pri določanju zahtev za nakup,
primerjavo produktov različnih dobaviteljev in preverjanje kakovosti produktov. Kot drugo, preskusi z merilom za uspešno/neuspešno opravljenost so zasnovani z namenom ločevanja zasnov sledilnikov, ki se lahko hitreje okvarijo, od tistih zasnov, ki so zanesljive in primerne za uporabo, kot jo določa proizvajalec. Mehansko in okoljsko preskušanje v tem standardu je zasnovano za oceno zmogljivosti sledilnika v različnih pogojih delovanja in preživetja izrednih razmer. Mehansko preskušanje ni namenjeno certificiranju strukturnih in temeljnih zasnov, ker je ta vrsta certificiranja odvisna od krajevne pristojnosti, vrste tal in ostalih krajevnih zahtev.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2015
Sledilniki sonca za fotonapetostne sisteme - Ocena zasnove (IEC 62817:2014)
Solar trackers for photovoltaic systems - Design qualification
Ta slovenski standard je istoveten z: EN 62817:2015
ICS:
27.160 6RQþQDHQHUJLMD Solar energy engineering
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 62817
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2015
ICS 27.160
English Version
Photovoltaic systems - Design qualification of solar trackers
(IEC 62817:2014)
Systèmes photovoltaïques - Qualification de conception des Sonnen-Nachführeinrichtungen für photovoltaische
suiveurs solaires Systeme - Bauarteignung
(IEC 62817:2014) (IEC 62817:2014)
This European Standard was approved by CENELEC on 2014-09-29. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62817:2015 E
Foreword
The text of document 82/853/FDIS, future edition 1 of IEC 62817, prepared by IEC/TC 82 "Solar
photovoltaic energy systems" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 62817:2015.
The following dates are fixed:
(dop) 2015-09-13
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2017-09-29
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62817:2014 was approved by CENELEC as a European
Standard without any modification.
- 3 - EN 62817:2015
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-2-6 - Environmental testing -- Part 2-6: Tests - EN 60068-2-6 -
Test Fc: Vibration (sinusoidal)
IEC 60068-2-21 - Environmental testing -- Part 2-21: Tests - EN 60068-2-21 -
Test U: Robustness of terminations and
integral mounting devices
IEC 60068-2-27 - Environmental testing -- Part 2-27: Tests - EN 60068-2-27 -
Test Ea and guidance: Shock
IEC 60068-2-75 - Environmental testing -- Part 2-75: Tests - EN 60068-2-75 -
Test Eh: Hammer tests
IEC 60529 - Degrees of protection provided by - -
enclosures (IP Code)
IEC 60904-3 2008 Photovoltaic devices -- Part 3: EN 60904-3 2008
Measurement principles for terrestrial
photovoltaic (PV) solar devices with
reference spectral irradiance data
IEC 61000-4-5 2005 Electromagnetic compatibility (EMC) -- Part EN 61000-4-5 2006
4-5: Testing and measurement techniques
- Surge immunity test
IEC 62262 2002 Degrees of protection provided by EN 62262 2002
enclosures for electrical equipment against
external mechanical impacts (IK code)
ISO 12103-1 - Road vehicles_- Test dust for filter - -
evaluation_- Part_1: Arizona test dust
ISO/IEC 17025 - General requirements for the competence EN ISO/IEC 17025 -
of testing and calibration laboratories
IEC 62817 ®
Edition 1.0 2014-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Photovoltaic systems – Design qualification of solar trackers
Systèmes photovoltaïques – Qualification de conception des suiveurs solaires
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
XB
CODE PRIX
ICS 27.160 ISBN 978-2-8322-1826-6
– 2 – IEC 62817:2014 © IEC 2014
CONTENTS
FOREWORD. 6
1 Scope and object . 8
2 Normative references . 8
3 Terms and definitions . 9
4 Specifications for solar trackers for PV applications . 9
5 Report . 12
6 Tracker definitions and taxonomy . 13
6.1 General . 13
6.2 Payload types . 13
6.2.1 Standard photovoltaic (PV) module trackers . 13
6.2.2 Concentrator photovoltaic (CPV) module trackers . 13
6.3 Rotational axes . 14
6.3.1 General . 14
6.3.2 Single-axis trackers . 14
6.3.3 Dual-axis trackers . 15
6.4 Actuation and control . 17
6.4.1 Architecture . 17
6.4.2 Drive train . 17
6.4.3 Drive types . 17
6.4.4 Drive train torque . 18
6.5 Types of tracker control . 18
6.5.1 Passive control . 18
6.5.2 Active control . 18
6.5.3 Backtracking . 19
6.6 Structural characteristics . 19
6.6.1 Vertical supports . 19
6.6.2 Foundation types . 20
6.6.3 Tracker positions . 20
6.6.4 Stow time . 21
6.7 Energy consumption . 21
6.7.1 Daily energy consumption . 21
6.7.2 Stow energy consumption . 21
6.8 External elements and interfaces . 21
6.8.1 Foundation . 21
6.8.2 Foundation interface . 21
6.8.3 Payload . 21
6.8.4 Payload interface . 22
6.8.5 Payload mechanical interface . 22
6.8.6 Payload electrical interface . 22
6.8.7 Grounding interface . 22
6.8.8 Installation effort . 22
6.8.9 Control interface . 22
6.9 Internal tolerances . 23
6.9.1 Primary-axis tolerance . 23
6.9.2 Secondary axis tolerance . 23
6.9.3 Backlash . 23
IEC 62817:2014 © IEC 2014 – 3 –
6.9.4 Stiffness . 23
6.10 Tracker system elements . 24
6.10.1 Mechanical structure . 24
6.10.2 Tracker controller . 24
6.10.3 Sensors . 24
6.11 Reliability terminology . 24
6.11.1 General . 24
6.11.2 Mean time between failures (MTBF) . 24
6.11.3 Mean time between critical failures (MTBCF) . 25
6.11.4 Mean time to repair (MTTR) . 25
6.12 Environmental conditions . 25
6.12.1 Operating temperature range . 25
6.12.2 Survival temperature range . 25
6.12.3 Wind speed . 25
6.12.4 Maximum wind during operation . 26
6.12.5 Maximum wind during stow . 26
6.12.6 Snow load . 26
7 Tracker accuracy characterization . 26
7.1 Overview . 26
7.2 Pointing error (instantaneous) . 26
7.3 Measurement . 27
7.3.1 Overview . 27
7.3.2 Example of experimental method t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.