EN IEC 62108:2022

Concentrator photovoltaic (CPV) modules and assemblies - Design qualification and type approval

This International Standard specifies the minimum requirements for the design qualification and type approval of concentrator photovoltaic (CPV) modules and assemblies suitable for long-term operation in general open-air climates as defined in IEC 60721-2-1. The test sequence is partially based on that specified in IEC 61215-1 for the design qualification and type approval of flat-plate terrestrial crystalline silicon PV modules. However, some changes have been made to account for the special features of CPV receivers and modules, particularly with regard to the separation of on-site and in-lab tests, effects of tracking alignment, high current density, and rapid temperature changes, which have resulted in the formulation of some new test procedures or new requirements. The object of this test standard is to determine the electrical, mechanical, and thermal characteristics of the CPV modules and assemblies and to show, as far as possible within reasonable constraints of cost and time, that the CPV modules and assemblies are capable of withstanding prolonged exposure in climates described in the scope. The actual life of CPV modules and assemblies so qualified will depend on their design, production, environment, and the conditions under which they are operated. This standard shall be used in conjunction with the retest guidelines described in Annex B.

Konzentrator-Photovoltaik(CPV)-Module und -Anordnungen - Bauarteignung und Bauartzulassung

Modules et ensembles photovoltaïques à concentration - Qualification de la conception et homologation

IEC 62108:2022 est disponible sous forme de IEC 62108:2022 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 62108:2022 spécifie les exigences minimales relatives à la qualification de la conception et l'homologation des modules et ensembles photovoltaïques à concentration (CPV - concentrator photovoltaic) pour une utilisation de longue durée dans les climats généraux d'air libre, comme cela est défini dans l'IEC 60721-2-1. Le présent document d'essai a pour objet de déterminer les caractéristiques électriques, mécaniques et thermiques des modules et ensembles CPV et de montrer, autant que possible avec des contraintes de coût et de temps raisonnables, que les modules et ensembles CPV peuvent supporter une exposition prolongée aux climats définis dans le domaine d'application.

Koncentratorski fotonapetostni (CPV) moduli in sestavi - Ocena zasnove in odobritev tipa

Ta mednarodni standard določa minimalne zahteve za oceno zasnove in odobritev tipa koncentratorskih fotonapetostnih (CPV) modulov in sestavov, primernih za dolgotrajno uporabo v običajnih okoljih na prostem, kot je opredeljeno v standardu IEC 60721-2-1. Preskusno zaporedje delno temelji na zaporedju, določenem v standardu IEC 61215-1 za oceno zasnove in odobritev tipa za ploščate prizemne fotonapetostne module iz kristalnega silicija. Vendar so bile vpeljane spremembe, ki obravnavajo posebne funkcije koncentratorskih fotonapetostnih sprejemnikov in modulov, zlasti glede ločevanja preskusov na mestu uporabe in laboratorijskih preskusov, učinkov poravnave, visoke tokovne gostote in hitrih temperaturnih sprememb, na podlagi katerih so bili pripravljeni nekateri novi preskusni postopki ali nove zahteve.
Namen tega preskusnega standarda je določiti električne, mehanske in toplotne lastnosti koncentratorskih fotonapetostnih modulov in sestavov ter prikazati (kot je mogoče v razumnih stroškovnih in časovnih omejitvah), da lahko koncentratorski fotonapetostni moduli in sestavi prenesejo učinke dolgotrajne izpostavljenosti v okoljih, opisanih v okviru področja uporabe. Dejanska življenjska doba tako ocenjenih koncentratorskih fotonapetostnih modulov in sestavov je odvisna od njihove zasnove, izdelave, okolja uporabe in pogojev delovanja.
Ta standard se uporablja skupaj z navodili za ponovno preskušanje, opisanimi v dodatku B.

General Information

• Status: Published
• Publication Date: 21-Jul-2022
• ICS: 27.160 - Solar energy engineering
• Technical Committee: CLC/TC 82 - Solar photovoltaic energy systems
• Drafting Committee: IEC/TC 82 - IEC_TC_82
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 22-Jul-2022
• Completion Date: 22-Jul-2022
• Ref Project: SIST EN IEC 62108:2022 - Concentrator photovoltaic (CPV) modules and assemblies - Design qualification and type approval

Relations

• Replaces: EN 62108:2016 - Concentrator photovoltaic (CPV) modules and assemblies - Design qualification and type approval
• Effective Date: 26-Jul-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62108:2022
01-september-2022
Nadomešča:
SIST EN 62108:2017
Koncentratorski fotonapetostni (CPV) moduli in sestavi - Ocena zasnove in
odobritev tipa
Concentrator photovoltaic (CPV) modules and assemblies - Design qualification and type
approval
Konzentrator-Photovoltaik(CPV)-Module und -Anordnungen - Bauarteignung und
Bauartzulassung
Modules et ensembles photovoltaïques à concentration - Qualification de la conception
et homologation
Ta slovenski standard je istoveten z: EN IEC 62108:2022
ICS:
27.160 Sončna energija Solar energy engineering
SIST EN IEC 62108:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62108:2022

---------------------- Page: 2 ----------------------
SIST EN IEC 62108:2022


EUROPEAN STANDARD EN IEC 62108

NORME EUROPÉENNE

EUROPÄISCHE NORM July 2022
ICS 27.160 Supersedes EN 62108:2016
English Version
Concentrator photovoltaic (CPV) modules and assemblies -
Design qualification and type approval
(IEC 62108:2022)
Modules et ensembles photovoltaïques à concentration - Konzentrator-Photovoltaik(CPV)-Module und -Anordnungen
Qualification de la conception et homologation - Bauarteignung und Bauartzulassung
(IEC 62108:2022) (IEC 62108:2022)
This European Standard was approved by CENELEC on 2022-07-07. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62108:2022 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62108:2022
EN IEC 62108:2022 (E)
European foreword
The text of document 82/2024/FDIS, future edition 3 of IEC 62108, prepared by IEC/TC 82 "Solar
photovoltaic energy systems" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 62108:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-04-07
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-07-07
document have to be withdrawn

This document supersedes EN 62108:2016 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62108:2022 was approved by CENELEC as a European
Standard without any modification.
2

---------------------- Page: 4 ----------------------
SIST EN IEC 62108:2022
EN IEC 62108:2022 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec
...