iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

HD 60364-7-729:2009/A11:2017

(Amendment)

Low-voltage electrical installations - Part 7-729: Requirements for special installations or locations - Operating or maintenance gangways

Low-voltage electrical installations - Part 7-729: Requirements for special installations or locations - Operating or maintenance gangways

2021: CLC legacy converted by DCLab NISOSTS

Errichten von Niederspannungsanlagen - Teil 7-729: Anforderungen für Betriebsstätten, Räume und Anlagen besonderer Art - Bedienungsgänge und Wartungsgänge

Installations électriques à basse tension - Partie 7-729: Règles pour les installations et emplacements spéciaux - Passages d'entretien ou de service

Nizkonapetostne električne inštalacije - 7-729. del: Zahteve za posebne inštalacije ali lokacije - Delovni ali vzdrževalni prehod - Dopolnilo A11

Zahteve tega dela standarda HD 60364 se nanašajo na osnovno zaščito in druge vidike v območjih z omejenim dostopom s sklopi stikalnih in krmilnih naprav, vključno z zahtevami za delovne ali vzdrževalne prehode.

General Information

Status
Published
Publication Date
10-Aug-2017
Withdrawal Date
30-May-2020
ICS
91.140.50 - Electricity supply systems
Technical Committee
CLC/TC 64 - Electrical installations and protection against electric shock
Drafting Committee
CLC/TC 64 - Electrical installations and protection against electric shock
Current Stage
6060 - Document made available - Publishing
Start Date
11-Aug-2017
Due Date
08-Mar-2019
Completion Date
11-Aug-2017
Ref Project
SIST HD 60364-7-729:2009/A11:2017 - Low-voltage electrical installations - Part 7-729: Requirements for special installations or locations - Operating or maintenance gangways

Relations

Amends
HD 60364-7-729:2009 - Low-voltage electrical installations - Part 7-729: Requirements for special installations or locations - Operating or maintenance gangways
Effective Date
26-Jan-2023

Buy Standard

HD 60364-7-729:2009/A11:2017HD 60364-7-729:2009/A11:2017
PreviousNext
Amendment
HD 60364-7-729:2009/A11:2017
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST HD 60364-7-729:2009/A11:2017
01-oktober-2017
1L]NRQDSHWRVWQHHOHNWULþQHLQãWDODFLMHGHO=DKWHYH]DSRVHEQHLQãWDODFLMH
DOLORNDFLMH'HORYQLDOLY]GUåHYDOQLSUHKRG'RSROQLOR$
Low-voltage electrical installations - Part 7-729: Requirements for special installations or
locations - Operating or maintenance gangways
Errichten von Niederspannungsanlagen - Teil 7-729: Anforderungen für Betriebsstätten,
Räume und Anlagen besonderer Art - Bedienungsgänge und Wartungsgänge
Installations électriques à basse tension - Partie 7-729: Règles pour les installations et
emplacements spéciaux - Passages d'entretien ou de service
Ta slovenski standard je istoveten z: HD 60364-7-729:2009/A11:2017
ICS:
91.140.50 Sistemi za oskrbo z elektriko Electricity supply systems
SIST HD 60364-7-729:2009/A11:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST HD 60364-7-729:2009/A11:2017

---------------------- Page: 2 ----------------------

SIST HD 60364-7-729:2009/A11:2017

HARMONIZATION DOCUMENT HD 60364-7-729:2009/A11

DOCUMENT D'HARMONISATION

HARMONISIERUNGSDOKUMENT
August 2017
ICS 91.140.50
English Version
Low-voltage electrical installations - Part 7-729: Requirements
for special installations or locations - Operating or maintenance
gangways
Installations électriques à basse tension - Partie 7-729: Errichten von Niederspannungsanlagen - Teil 7-729:
Règles pour les installations et emplacements spéciaux - Anforderungen für Betriebsstätten, Räume und Anlagen
Passages d'entretien ou de service besonderer Art - Bedienungsgänge und Wartungsgänge
This amendment A11 modifies the Harmonization Document HD 60364-7-729:2009; it was approved by CENELEC on 2017-05-31.
CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for implementation of
this amendment at national level.
Up-to-date lists and bibliographical references concerning such national implementations may be obtained on application to the CEN-
CENELEC Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German).
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
HD 60364-7-716:2023(Main)
Low-voltage electrical installations - Part 7-716: Requirements for special installations or locations – ELV DC power distribution over information and communications technology (ICT) cable infrastructure
SIST HD 60364-7-716:2024

IEC 60364-7-716:2023 specifies requirements in electrical installations for the distribution of ELV DC power using balanced, information technology cables and accessories primarily designed for data transmission, as specified in terms of a category within the channels of ISO/IEC 11801-1 using power sourcing equipment in accordance with IEC 62368-3. Requirements are included for the design, erection, and verification of telecommunications infrastructure for the purpose of both telecommunications and distribution of ELV DC power. In addition, requirements are included for use of existing telecommunications infrastructure for distribution of ELV DC power. The power delivery systems include, but are not restricted to, the Power over Ethernet systems specified by IEEE 802.3. This document does not apply to the use of cables and accessories within the core and access networks for example private branch exchange (PBX).

  • Standardization document
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
HD 60364-4-43:2023(Main)
Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent
SIST HD 60364-4-43:2023

IEC 60364-4-43:2023 provides requirements for: - protection of live conductors, PEN conductors, PEM conductors, and PEL conductors against the harmful effects caused by overcurrent; - coordination of measures for protection against overcurrent. This fourth edition cancels and replaces the third edition published in 2008. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the standard has been restructured, see Table 1 (Correspondence between IEC 60364‑4‑43:2008 and this document) below; b) the measure "automatic disconnection of supply" has been designated as the preferred measure for protection against overcurrent; c) all measures except the measure "automatic disconnection of supply" have been transferred into new normative annexes to indicate that these measures are usable in certain applications and under certain restricted conditions only (see Annex A, Annex B and Annex E); d) a new clause "Terms and definitions" has been added; e) new requirements have been added for the protection of the neutral or mid-point conductor (with and without triplen harmonics).

  • Standardization document
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
HD 60364-5-52:2011/A12:2022(Amendment)
Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems
SIST HD 60364-5-52:2011/A12:2023

IEC 60364-5-52:2009 deals with the selection and erection of wiring systems. This third edition cancels and replaces the second edition, published in 2001, and constitutes a technical revision. The main changes with respect to the previous edition are as follows: - Subclause 521.4 introduces minor changes with regard to busbar trunking systems and powertrack systems. - Subclause 523.6 introduces minor changes with regard to the sizing of cables where harmonic currents are present. - A new sublause 523.9 concerning single-core cables with a metallic covering has been introduced. - Clause 525 introduces changes in the maximum value of voltage drop permitted between the origin of the consumer's installation and the equipment which should not be greater than that given in the relevant annex. - Clause 526 introduces minor changes to electrical connections including additional exceptions for inspection of connections and additional notes. - Clause 528 introduces additional requirements with regard to proximity of underground power and telecommunication cables. - Clause 529 introduces minor changes to selection and erection of wiring systems in relation to maintainability, including cleaning.

  • Amendment
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
HD 60364-5-54:2011/A1:2022(Amendment)
Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
SIST HD 60364-5-54:2011/A1:2023

IEC 60364-5-54:2011 addresses the earthing arrangements and protective conductors including protective bonding conductors in order to satisfy the safety of the electrical installation. This third edition cancels and replaces the second edition, published in 2002, and constitutes a technical revision. The main changes with respect to the previous edition are listed below: - clarification of the definition of protective conductor; - improved specification of mechanical characteristics of the earth electrode; - introduction of earth electrode for protection against electric shock and lighting protection; - annexes describing concrete-embedded foundation earth electrodes and soil-embedded earth electrode. IEC 60364-5-54:2011 has the status of a basic safety publication in accordance with IEC Guide 104. This document also includes requirements regarding earthing and equipotential bonding for information and communication technology (ICT) with the aim of: - reducing the risk of electrical hazards for correct operation of these devices and the information and communication technology wiring; - providing the telecommunication systems with a reliable signal reference plane that can improve resistance to electromagnetic interference (EMI) by reference to ISO/IEC 30129. NOTE Examples of information and communication technology (ICT) include: - DC supply networks (and systems) for supplying power to ICT equipment within a building; - star-shaped private automatic branch exchanges (PABX) or their equipment; - local area (communication) networks (LANs); - fire and intruder alarms communication systems; - building automation systems, e.g. direct digital control systems; - systems for computer-aided manufacturing (CAM) and other computer-aided services; - broadcast and communication technology.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
HD 60364-5-53:2022/AC:2022-08(Corrigendum)
Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Switchgear and controlgear
SIST HD 60364-5-53:2022/AC:2022

CCMC - Correction of ToC, clause numbering
TC - Correction of Figure 534.1

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
HD 60364-5-53:2022(Main)
Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Switchgear and controlgear
SIST HD 60364-5-53:2022

2020-10-09: document blockeddue to technical changes. waiting for bt decision to resolve

  • Standardization document
    94 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
HD 60364-4-42:2011/A11:2021(Amendment)
Low voltage electrical installations - Part 4-42: Protection for safety - Protection against thermal effects
SIST HD 60364-4-42:2011/A11:2022

NEXT ACTION: TC action by 2021-11-01
2021-06-24 MDC: Document on hold awaiting BT approval of A-deviations
2019-10-01: upcoming CLC/TC 64 request to CLC/BT to proceed with a second formal vote.

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
HD 60364-8-2:2018/A12:2021(Amendment)
Low-voltage electrical installations - Part 8-2: Prosumer's low-voltage electrical installations
SIST HD 60364-8-2:2019/A12:2021

No scope available

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
HD 60364-7-706:2007/A1:2020(Amendment)
Low-voltage electrical installations - Part 7-706: Requirements for special installations or locations - Conducting locations with restricted movement
SIST HD 60364-7-706:2007/A1:2021

The particular requirements of this part apply to fixed equipment in conducting locations where movement of persons is restricted by the location, and to supplies for portable equipment for use in such locations. A conducting location with restricted movement is comprised mainly of metallic or other conductive surrounding parts, within which it is likely that a person will come in contact through a substantial portion of his body with the metallic or other conductive surrounding parts and where the possibility of interrupting this contact is limited.

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
HD 60364-4-41:2017/A12:2019(Amendment)
Low-voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
SIST HD 60364-4-41:2017/A12:2019

ISO/TR 22411:2008 presents ergonomics data and guidelines for applying ISO/IEC Guide 71 in addressing the needs of older persons and persons with disabilities in standards development. It provides ergonomics data and knowledge about human abilities - sensory, physical and cognitive - and allergies, as well as guidance on the accessible design of products, services and environments.

  • Addendum – translation
    4 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day