HD 60364-5-52:2011/A1:2025
(Amendment)Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems
Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems
Errichten von Niederspannungsanlagen - Teil 5-52: Auswahl und Errichtung elektrischer Betriebsmittel - Kabel- und Leitungsanlagen
Installations électriques à basse-tension - Partie 5-52: Choix et mise en oeuvre des matériels électriques - Canalisations
Nizkonapetostne električne inštalacije - 5-52. del: Izbira in namestitev električne opreme - Inštalacijski sistemi - Dopolnilo A1 (IEC 60364-5-52:2009/AMD1:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2025
Nizkonapetostne električne inštalacije - 5-52. del: Izbira in namestitev električne
opreme - Inštalacijski sistemi - Dopolnilo A1 (IEC 60364-5-52:2009/AMD1:2024)
Low-voltage electrical installations - Part 5-52: Selection and erection of electrical
equipment - Wiring systems (IEC 60364-5-52:2009/AMD1:2024)
Errichten von Niederspannungsanlagen - Teil 5-52: Auswahl und Errichtung elektrischer
Betriebsmittel - Kabel- und Leitungsanlagen (IEC 60364-5-52:2009/AMD1:2024)
Installations électriques à basse-tension - Partie 5-52: Choix et mise en oeuvre des
matériels électriques - Canalisations (IEC 60364-5-52:2009/AMD1:2024)
Ta slovenski standard je istoveten z: HD 60364-5-52:2011/A1:2025
ICS:
91.140.50 Sistemi za oskrbo z elektriko Electricity supply systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
HARMONIZATION DOCUMENT HD 60364-5-52:2011/A1
DOCUMENT D'HARMONISATION
HARMONISIERUNGSDOKUMENT January 2025
ICS 13.260; 91.140.50
English Version
Low-voltage electrical installations - Part 5-52: Selection and
erection of electrical equipment - Wiring systems
(IEC 60364-5-52:2009/AMD1:2024)
Installations électriques à basse-tension - Partie 5-52: Errichten von Niederspannungsanlagen - Teil 5-52:
Choix et mise en oeuvre des matériels électriques - Auswahl und Errichtung elektrischer Betriebsmittel - Kabel-
Canalisations und Leitungsanlagen
(IEC 60364-5-52:2009/AMD1:2024) (IEC 60364-5-52:2009/AMD1:2024)
This amendment A1 modifies the Harmonization Document HD 60364-5-52:2011; it was approved by CENELEC on 2024-12-27. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for implementation of this
amendment at national level.
Up-to-date lists and bibliographical references concerning such national implementations may be obtained on application to the CEN-
CENELEC Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German).
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. HD 60364-5-52:2011/A1:2025 E
European foreword
The text of document 64/2675/FDIS, future edition 3 of IEC 60364-5-52/AMD1, prepared by TC 64
"Electrical installations and protection against electric shock" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as HD 60364-5-52:2011/A1:2025.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2026-01-31
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2028-01-31
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60364-5-52:2009/AMD1:2024 was approved by CENELEC
as a European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Add the following reference:
Publication Year Title EN/HD Year
IEC 60364-4-43 2023 Low-voltage electrical installations - Part 4- HD 60364-4-43 2023
43: Protection for safety - Protection
against overcurrent
IEC 60364-5-52 ®
Edition 3.0 2024-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Low-voltage electrical installations –
Part 5-52: Selection and erection of electrical equipment – Wiring systems
Installations électriques à basse-tension –
Partie 5-52: Choix et mise en oeuvre des matériels électriques – Canalisations
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 13.260, 91.140.50 ISBN 978-2-8322-9969-2
– 2 – IEC 60364-5-52:2009/AMD1:2024
© IEC 2024
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
LOW-VOLTAGE ELECTRICAL INSTALLATIONS –
Part 5-52: Selection and erection of electrical equipment –
Wiring systems
AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in
respect thereof. As of the date of publication of this document, IEC had not received notice of (a) patent(s), which
may be required to implement this document. However, implementers are cautioned that this may not represent
the latest information, which may be obtained from the patent database available at https://patents.iec.ch. IEC
shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to IEC 60364-5-52:2009 has been prepared by IEC technical committee 64:
Electrical installations and protection against electrical shock.
The text of this Amendment is based on the following documents:
Draft Report on voting
64/2675/FDIS 64/2703/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
IEC 60364-5-52:2009/AMD1:2024 – 3 –
© IEC 2024
The language used for the development of this Amendment is English.
This document was drafted in accordan
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.