EN 60061-1:1993/A49:2013

Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

2015-08-07: LVD directive removed for the whole EN 60061 series following D151/C072 taken on 2015-08-04.

Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und Sicherheit - Teil 1: Lampensockel

Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et de la sécurité - Partie 1: Culots de lampes

Vznožki in okovi sijalk skupaj s kalibri za kontrolo medsebojne zamenljivosti in varnosti - 1. del: Vznožki sijalk - Dopolnilo 49

Vsebuje priporočila IEC v zvezi z vznožki in okovi žarnic in sijalk , ki so danes v splošni rabi, skupaj z ustreznimi kalibri, s ciljem zagotoviti mednarodno medsebojno zamenljivost. Ponazorjeni kalibri, čeprav načeloma splošno sprejeti, niso nujno edina oblika, v kateri so lahko narejeni. Ponazorjeni kalibri, čeprav načeloma splošno sprejeti, niso nujno edina oblika, v kateri so lahko narejeni.

General Information

• Status: Published
• Publication Date: 02-May-2013
• Withdrawal Date: 01-Apr-2016
• ICS: 29.140.10 - Lamp caps and holders
• Technical Committee: CLC/TC 34 - 'Lamps and related equipment
• Drafting Committee: IEC/SC 34B - IEC_SC_34B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 03-May-2013
• Completion Date: 03-May-2013
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2009/125/EC - Directive 2005/32/EC of the European Parliament and of the Council of 6 July 2005 establishing a framework for the setting of ecodesign requirements for energy-using products and amending Council Directive 92/42/EEC and Directives 96/57/EC and 2000/55/EC of the European Parliament and of the Council
• Ref Project: SIST EN 60061-1:1999/A49:2014 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

Relations

• Amends: EN 60061-1:1993 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60061-1:1999/A49:2014
01-januar-2014
Vznožki in okovi sijalk skupaj s kalibri za kontrolo medsebojne zamenljivosti in
varnosti - 1. del: Vznožki sijalk - Dopolnilo 49
Lamp caps and holders together with gauges for the control of interchangeability and
safety - Part 1: Lamp caps
Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und
Sicherheit - Teil 1: Lampensockel
Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et
de la sécurité - Partie 1: Culots de lampes
Ta slovenski standard je istoveten z: EN 60061-1:1993/A49:2013
ICS:
29.140.10 Grla in držala žarnic Lamp caps and holders
SIST EN 60061-1:1999/A49:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60061-1:1999/A49:2014

---------------------- Page: 2 ----------------------

SIST EN 60061-1:1999/A49:2014

EUROPEAN STANDARD
EN 60061-1/A49

NORME EUROPÉENNE
May 2013
EUROPÄISCHE NORM

ICS 29.140.10


English version


Lamp caps and holders together with gauges for the control of
interchangeability and safety -
Part 1: Lamp caps
(IEC 60061-1:1969/A49:2013)


Culots de lampes et douilles ainsi que Lampensockel und -fassungen sowie
calibres pour le contrôle de Lehren zur Kontrolle der Austauschbarkeit
l'interchangeabilité et de la sécurité - und Sicherheit -
Partie 1: Culots de lampes Teil 1: Lampensockel
(CEI 60061-1:1969/A49:2013) (IEC 60061-1:1969/A49:2013)





This amendment A49 modifies the European Standard EN 60061-1:1993; it was approved by CENELEC on
2013-04-02. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60061-1:1993/A49:2013 E

---------------------- Page: 3 ----------------------

SIST EN 60061-1:1999/A49:2014
EN 60061-1:1993/A49:2013 - 2 -

Foreword
The text of document 34B/1668/FDIS, future edition 1 of IEC 60061-1:1969/A49, prepared by SC 34B,
"Lamp caps and holders", of IEC TC 34, "Lamps and related equipment" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 60061-1:1993/A49:2013.

The following dates are fixed:
• latest date by which the document has (dop) 2014-01-02
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-04-02
• latest date by which the national
standards conflicting with the

document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed
for Use within Certain Voltage Limits (LVD - 2006/95/EC).

Endorsement notice
The text of the International Standard IEC 60061-1:1969/A49:2013 was approved by CENELEC as a
European Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 60061-1:1999/A49:2014


NORME CEI

INTERNATIONALE IEC


INTERNATIONAL 60061-1




STANDARD
AMENDEMENT 49

AMENDMENT 49


2013-02








Amendement 49


Culots de lampes et douilles ainsi que calibres

pour le contrôle de l'interchangeabilité
et de la sécurité –
Partie 1:
Culots de lampes

Amendment 49
Lamp caps and holders together with
gauges for the control of interchangeability
and safety –
Part 1:
Lam
...