Low-voltage switchgear and controlgear - Device profiles for networked industrial devices - Part 2: Root device profiles for starters and similar equipment

IEC 61915-2:2011 specifies root device profiles as defined by IEC 61915-1 for starters and similar equipment covered by the following product standards: - electromechanical contactors and motor-starters (IEC 60947-4-1), - AC semiconductor motor controllers and starters (IEC 60947-4-2), - AC semiconductor controllers and contactors for non-motor loads (IEC 60947-4-3), - control and protective switching devices (or equipment) (CPS) (IEC 60947-6-2), - control units for built-in thermal protection (PTC) for rotating electrical machines (IEC 60947-8).

Niederspannungsschaltgeräte - Geräteprofile für vernetzte industrielle Schaltgeräte - Teil 2: Grundlegende Geräteprofile für Starter und ähnliche Betriebsmittel

Appareillage à basse tension - Profils d'appareil pour les appareils industriels mis en réseau - Partie 2: Profils racines d'appareil pour les démarreurs et les matériels similaires

La CEI 61915-2:2011 spécifie les profils racines d'appareil, tels que définis par la CEI 61915-1, pour les démarreurs et les matériels similaires couverts par les normes de produit suivantes: - contacteurs et démarreurs de moteurs électromécaniques (CEI 60947-4-1), - gradateurs et démarreurs de moteurs à semi-conducteurs à courant alternatif (CEI 60947-4-2), - gradateurs et contacteurs à semi-conducteurs pour charges, autres que des moteurs, à courant alternatif (CEI 60947-4-3), - appareils (ou matériel) de connexion de commande et de protection (ACP) (CEI 60947-6-2), - unités de commande pour la protection thermique incorporée (CTP) aux machines électriques tournantes (CEI 60947-8).

Nizkonapetostne stikalne in krmilne naprave - Profili naprav za industrijske naprave, vključene v omrežje - 2. del: Korenski profili naprav za starterje in podobno opremo (IEC 61915-2:2011)

Ta del standarda IEC 61915 določa korenske profile naprav iz standarda IEC 61915-1 za starterje in podobno opremo, zajeto v naslednjih standardih za izdelek: – elektromehanski kontaktorji in motorski zaganjalniki (IEC 60947-4-1), – polprevodniški krmilniki in zaganjalniki motorjev na izmenični tok (IEC 60947-4-2), – polprevodniški krmilniki in kontaktorji na izmenični tok za nemotorske obremenitve (IEC 60947-4-3), – krmilne in zaščitne stikalne naprave (ali oprema) (CPS) (IEC 60947-6-2), – krmilne enote za vgrajeno toplotno zaščito (PTC) rotacijskih električnih strojev (IEC 60947-8).

General Information

Status
Published
Publication Date
08-Mar-2012
Withdrawal Date
23-Nov-2014
Current Stage
6060 - Document made available - Publishing
Start Date
09-Mar-2012
Completion Date
09-Mar-2012

Buy Standard

Standard
EN 61915-2:2012 - BARVE
English language
39 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61915-2:2012
01-maj-2012
1L]NRQDSHWRVWQHVWLNDOQHLQNUPLOQHQDSUDYH3URILOLQDSUDY]DLQGXVWULMVNH
QDSUDYHYNOMXþHQHYRPUHåMHGHO.RUHQVNLSURILOLQDSUDY]DVWDUWHUMHLQ
SRGREQRRSUHPR ,(&
Low-voltage switchgear and controlgear - Device profiles for networked industrial devices
- Part 2: Root device profiles for starters and similar equipment (IEC 61915-2:2011)
Niederspannungsschaltgeräte - Geräteprofile für vernetzte industrielle Schaltgeräte - Teil
2: Grundlegende Geräteprofile für Starter und ähnliche Betriebsmittel (IEC 61915-
2:2011)
Appareillage à basse tension - Profils d'appareil pour les appareils industriels mis en
réseau - Partie 2: Profils racine pour les démarreurs et les équipements similaires (CEI
61915-2:2011)
Ta slovenski standard je istoveten z: EN 61915-2:2012
ICS:
29.130.20 Nizkonapetostne stikalne in Low voltage switchgear and
krmilne naprave controlgear
SIST EN 61915-2:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61915-2

NORME EUROPÉENNE
March 2012
EUROPÄISCHE NORM

ICS 29.130


English version


Low-voltage switchgear and controlgear -
Device profiles for networked industrial devices -
Part 2: Root device profiles for starters and similar equipment
(IEC 61915-2:2011)


Appareillage à basse tension -  Niederspannungsschaltgeräte -
Profils d'appareil pour les appareils Geräteprofile für vernetzte industrielle
industriels mis en réseau - Schaltgeräte -
Partie 2: Profils racines d'appareil pour les Teil 2: Grundlegende Geräteprofile für
démarreurs et les matériels similaires Starter und ähnliche Betriebsmittel
(CEI 61915-2:2011) (IEC 61915-2:2011)





This European Standard was approved by CENELEC on 2011-11-24. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61915-2:2012 E

---------------------- Page: 2 ----------------------

EN 61915-2:2012 - 2 -
Foreword
The text of document 17B/1752/FDIS, future edition 1 of IEC 61915-2, prepared by SC 17B, "Low-voltage
switchgear and controlgear", of IEC/TC 17, "Switchgear and controlgear" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61915-2:2012.

The following dates are fixed:
(dop) 2012-08-24
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2014-11-24
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.

Endorsement notice
The text of the International Standard IEC 61915-2:2011 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60947 series NOTE  Harmonized in EN 60947 series.
IEC 60947-4-1:2009 NOTE  Harmonized as EN 60947-4-1:2010 (not modified).
1)
IEC 60947-4-2:2011 NOTE  Harmonized as EN 60947-4-2:201X (not modified).
IEC 60947-4-3:1999 NOTE  Harmonized as EN 60947-4-3:2000 + A1:2006 + A2:2011 (not modified).
+ A1:2006
+ A2:2011
IEC 60947-6-2:2002 NOTE  Harmonized as EN 60947-6-2:2003 + A1:2007 (not modified).
+ A1:2007
1)
IEC 60947-8:2003 NOTE  Harmonized as EN 6094
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.