Multi-element metallic cables used in analogue and digital communication and control - Part 11-1: Sectional specification for un-screened cables characterised up to 500 MHz - Horizontal and building backbone cables

EN 50288-11-1 is a sectional specification for un-screened cables, characterised from 1 MHz up to 500 MHz, to be used in horizontal and building backbone wiring for Information Technology generic-cabling systems. This sectional specification contains the electrical, mechanical, transmission and environmental performance characteristics and requirements of the cables when tested in accordance with the referenced test methods. This sectional specification is to be read in conjunction with EN 50288-1, which contains the essential provisions for its application. The cables covered in this sectional specification are intended to operate with voltages and currents normally encountered in communications systems. These cables are not intended to be used in conjunction with low impedance sources, for example the electrical power supplies of public utility mains.

Mehradrige metallische Daten- und Kontrollkabel für analoge und digitale Übertragung - Teil 11-1: Rahmenspezifikation für ungeschirmte Kabel bis 500 MHz - Kabel für den Horizontal- und Steigbereich

Câbles métalliques à éléments multiples utilisés pour les transmissions et les commandes analogiques et numériques - Partie 11-1: Spécification intermédiaire pour câbles non-blindés, pour applications jusqu'à 500 MHz - Câbles horizontaux et verticaux de bâtiment

Večelementni kovinski kabli za analogne in digitalne komunikacije in krmiljenje - 11-1. del: Področna specifikacija za nezaslonjene kable s karakteristikami do 500 MHz za vodoravno (etažno) in stavbno hrbtenično (medetažno) ožičenje

Standard EN 50288-11-1 je področna specifikacija za nezaslonjene kable, ki se lahko uporabljajo za pasovne širine od 1 MHz do 500 MHz v vodoravnem (etažnem) in stavbnem hrbteničnem (medetažnem) ožičenju za splošne sisteme okablenja v informacijski tehnologiji. Ta področna specifikacija vsebuje električne, mehanske, prenosne in okoljske karakteristike delovanja ter zahteve za kable pri preskušanju v skladu z navedenimi preskusnimi metodami. Ta področna specifikacija se uporablja skupaj s standardom EN 50288-1, ki vsebuje bistvene določbe za njeno uporabo. Kabli, zajeti v tej področni specifikaciji, so namenjeni za delovanje pri napetostih in tokovih, ki so običajni v komunikacijskih sistemih. Ti kabli niso namenjeni za uporabo z viri z nizko impedanco, na primer z električnim napajanjem javnih omrežij.

General Information

Status
Published
Publication Date
20-Dec-2012
Withdrawal Date
11-Nov-2015
Current Stage
6060 - Document made available - Publishing
Start Date
21-Dec-2012
Completion Date
21-Dec-2012

Buy Standard

Standard
EN 50288-11-1:2013
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50288-11-1:2013
01-marec-2013
9HþHOHPHQWQLNRYLQVNLNDEOL]DDQDORJQHLQGLJLWDOQHNRPXQLNDFLMHLQNUPLOMHQMH
GHO3RGURþQDVSHFLILNDFLMD]DQH]DVORQMHQHNDEOHVNDUDNWHULVWLNDPLGR
0+]]DYRGRUDYQR HWDåQR LQVWDYEQRKUEWHQLþQR PHGHWDåQR RåLþHQMH
Multi-element metallic cables used in analogue and digital communication and control -
Part 11: Sectional specification for un-screened cables, characterised up to 500 MHz, for
horizontal and building backbone wiring
Mehradrige metallische Daten- und Kontrollkabel für analoge und digitale Übertragung -
Teil 11: Rahmenspezifikation für ungeschirmte Kabel bis 500 MHz - Kabel für den
Horizontal- und Steigbereich
Câbles métalliques à éléments multiples utilisés pour les transmissions et les
commandes analogiques et numériques - Partie 11: Spécification intermédiaire pour
câbles non-blindés, pour applications jusqu'à 500 MHz - Câbles horizontaux et verticaux
de bâtiment
Ta slovenski standard je istoveten z: EN 50288-11-1:2012
ICS:
33.120.20 äLFHLQVLPHWULþQLNDEOL Wires and symmetrical
cables
SIST EN 50288-11-1:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50288-11-1:2013

---------------------- Page: 2 ----------------------

SIST EN 50288-11-1:2013

EUROPEAN STANDARD
EN 50288-11-1

NORME EUROPÉENNE
December 2012
EUROPÄISCHE NORM

ICS 33.120.10


English version


Multi-element metallic cables used in analogue and digital communication
and control -
Part 11-1: Sectional specification for un-screened cables characterised
up to 500 MHz -
Horizontal and building backbone cables



Câbles métalliques à éléments multiples Mehradrige metallische Daten- und
utilisés pour les transmissions et les Kontrollkabel für analoge und digitale
commandes analogiques et numériques - Übertragung -
Partie 11-1: Spécification intermédiaire Teil 11-1: Rahmenspezifikation für
pour câbles non-blindés, pour applications ungeschirmte Kabel bis 500 MHz -
jusqu'à 500 MHz - Kabel für den Horizontal- und
Câbles horizontaux et verticaux de Steigbereich
bâtiment



This European Standard was approved by CENELEC on 2012-11-12. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50288-11-1:2012 E

---------------------- Page: 3 ----------------------

SIST EN 50288-11-1:2013
EN 50288-11-1:2012 – 2 –
Contents
Foreword . 3
1 Scope . 5
2 Normative references . 5
3 Terms, definitions, symbols and abbreviations. 6
3.1 Terms and definitions . 6
3.2 Symbols and abbreviations . 6
4 Cable construction. 6
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.