EN 60793-1-48:2003

Optical fibres - Part 1-48: Measurement methods and test procedures - Polarization mode dispersion

Applies to three methods of measuring PMD. Uniform requirements for measuring the PMD of optical fibre, thereby assisting in the inspection of fibres and cables for commercial purposes are established.

Lichtwellenleiter - Teil 1-48: Messmethoden und Prüfverfahren - Polarisationsmodendispersion

Fibres optiques - Partie 1-48: Méthodes de mesure et procédures d'essai - Dispersion de mode de polarisation

S'applique à trois méthodes de mesure de la dispersion de mode de polarisation (PMD). Elle établit les prescriptions uniformes pour mesurer la PMD de la fibre optique contribuant ainsi au contrôle des fibres et des câbles dans les relations commerciales.

Optična vlakna – 1-48. del: Metode merjenja in preskusni postopki - disperzija z načinom polarizacije (IEC 607993-1-48:2003)*

General Information

• Status: Withdrawn
• Publication Date: 19-Nov-2003
• Withdrawal Date: 31-Oct-2006
• ICS: 33.180.10 - Fibres and cables
• Technical Committee: CLC/TC 86A - Optical fibres and optical fibre cables
• Drafting Committee: IEC/SC 86A - IEC_SC_86A
• Parallel Committee: IEC/SC 86A - IEC_SC_86A
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Sep-2010
• Completion Date: 01-Sep-2010
• Ref Project: SIST EN 60793-1-48:2004 - Optical fibres -- Part 1-48: Measurement methods and test procedures - Polarization mode dispersion

Relations

• Replaced By: EN 60793-1-48:2007 - Optical fibres - Part 1-48: Measurement methods and test procedures - Polarization mode dispersion
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SIST EN 60793-1-48:2004SLOVENSKIseptember 2004
STANDARDOptična vlakna – 1-48. del: Metode merjenja in preskusni postopki - disperzija z načinom polarizacije (IEC 607993-1-48:2003)*Optical fibres - Part 1-48: Measurement methods and test procedures - Polarization mode dispersion (IEC 607993-1-48:2003)©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 60793-1-48:2004(en)ICS33.180.10







EUROPEAN STANDARD
EN 60793-1-48 NORME EUROPÉENNE EUROPÄISCHE NORM
November 2003 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60793-1-48:2003 E
ICS 33.180.10
English version
Optical fibres Part 1-48: Measurement methods and test procedures –
Polarization mode dispersion (IEC 60793-1-48:2003)
Fibres optiques Partie 1-48: Méthodes de mesure
et procédures d'essai –
Dispersion de mode de polarisation (CEI 60793-1-48:2003)
Lichtwellenleiter Teil 1-48: Messmethoden
und Prüfverfahren – Polarisationsmodendispersion (IEC 60793-1-48:2003)
This European Standard was approved by CENELEC on 2003-11-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.



EN 60793-1-48:2003 - 2 -
Foreword The text of document 86A/849/FDIS, future edition 1 of IEC 60793-1-48, prepared by SC 86A, Fibres and cables, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60793-1-48 on 2003-11-01. This European Standard is to be read in conjunction with EN 60793-1-1:2003. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop) 2004-08-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow) 2006-11-01
Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annexes A, B, C and ZA are normative and annexes D to K are informative. Annex ZA has been added by CENELEC. EN 60793-1-4X consists of the following parts, under the general title: Optical fibres: - Part 1-40: Measurement methods and test procedures – Attenuation - Part 1-41: Measurement methods and test procedures – Bandwidth - Part 1-42: Measurement methods and test procedures – Chromatic dispersion - Part 1-43: Measurement methods and test procedures – Numerical aperture - Part 1-44: Measurement methods and test procedures – Cut-off wavelength - Part 1-45: Measurement methods and test procedures – Mode field diameter - Part 1-46: Measurement methods and test procedures – Monitoring of changes in optical transmittance - Part 1-47: Measurement methods and test procedures – Macrobending loss - Part 1-48: Measurement methods and test procedures – Polarization mode dispersion - Part 1-49: Measurement methods and test procedures – Differential mode delay __________ Endorsement notice The text of the International Standard IEC 60793-1-48:2003 was approved by CENELEC as a European Standard without any modification. __________



- 3 - EN 60793-1-48:2003
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). NOTE When an international publication has been
...