Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition

IEC 61158-2:2014 specifies the requirements for fieldbus component parts. It also specifies the media and network configuration requirements necessary to ensure agreed levels of data integrity before data-link layer error checking and interoperability between devices at the physical layer. The fieldbus physical layer conforms to layer 1 of the OSI 7-layer model as defined by ISO 7498 with the exception that, for some types, frame delimiters are in the physical layer while for other types they are in the data-link layer. This sixth edition cancels and replaces the fifth edition published in 2010. It constitutes a technical revision. This edition includes the following changes: - new Type 20 specification; - new Type 24 specification; - RS232 media specification for Type 4 removed.

Industrielle Kommunikationsnetze - Feldbusse - Teil 2: Spezifikation und Dienstfestlegungen des Physical Layer (Bitübertragungsschicht)

Réseaux de communication industriels - Spécifications des bus de terrain - Partie 2: Spécification et définition des services de la couche physique

L'IEC 61158-2:2014 spécifie les exigences applicables aux composants de bus de terrain. Elle spécifie également les exigences de configuration des supports et des réseaux requises pour garantir un niveau d'intégrité des données avant vérification d'erreur de la couche liaison de données et l'interopérabilité entre appareils au niveau de la couche physique. La couche physique des bus de terrain est conforme à la couche 1 du modèle OSI à 7 couches, telle que définie dans l'ISO/CEI 7498, à l'exception du fait que, pour certains types, les délimiteurs de trame se trouvent dans la couche physique tandis que pour d'autres types, ils se trouvent dans la couche liaison de données. Cette sixième édition annule et remplace la cinquième édition parue en 2010. Elle constitue une révision technique. Elle inclut les modifications suivantes: - nouvelle spécification de Type 20; - nouvelle spécification de Type 24; - spécification des supports RS232 pour Type 4 retirée.

Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 2. del: Specifikacija fizične ravni in definicija opravil (IEC 61158-2:2014)

Ta del standarda IEC 61158 določa zahteve za komponente procesnih vodil. Določa tudi medijske in omrežne konfiguracijske zahteve, nujne za zagotavljanje dogovorjenih ravni
a) neokrnjenosti podatkov pred preverjanjem napak na podatkovni povezovalni ravni;
b) povezljivosti med napravami na fizični ravni.
Fizična raven procesnih vodil je v skladu z ravnjo 1 modela ravni OSI 7, kot je določeno s standardom ISO 7498 z izjemo, da so pri nekaterih vrstah razmejevalnikov okvirja na fizični ravni, pri drugih vrstah pa na podatkovni povezovalni ravni.

General Information

Status
Published
Publication Date
16-Oct-2014
Withdrawal Date
20-Aug-2017
Current Stage
6060 - Document made available - Publishing
Start Date
17-Oct-2014
Completion Date
17-Oct-2014

Relations

Buy Standard

Standard
EN 61158-2:2015 - BARVE
English language
478 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61158-2:2015
01-marec-2015
1DGRPHãþD
SIST EN 61158-2:2010
,QGXVWULMVNDNRPXQLNDFLMVNDRPUHåMD6SHFLILNDFLMH]DSURFHVQDYRGLODGHO
6SHFLILNDFLMDIL]LþQHUDYQLLQGHILQLFLMDRSUDYLO ,(&
Industrial communication networks - Fieldbus specifications - Part 2: Physical layer
specification and service definition (IEC 61158-2:2014)
Industrielle Kommunikationsnetze - Feldbusse - Teil 2: Spezifikation und
Dienstfestlegungen des Physical Layer (Bitübertragungsschicht) (IEC 61158-2:2014)
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 2:
Spécification de couche physique et définition des services (CEI 61158-2:2014)
Ta slovenski standard je istoveten z: EN 61158-2:2014
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.10 )L]LþQLVORM Physical layer
35.110 Omreževanje Networking
SIST EN 61158-2:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61158-2:2015

---------------------- Page: 2 ----------------------

SIST EN 61158-2:2015


EUROPEAN STANDARD EN 61158-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2014
ICS 25.040; 35.100; 35.240.50 Supersedes EN 61158-2:2010
English Version
Industrial communication networks - Fieldbus specifications -
Part 2: Physical layer specification and service definition
(IEC 61158-2:2014)
Réseaux de communication industriels - Spécifications des Industrielle Kommunikationsnetze - Feldbusse - Teil 2:
bus de terrain - Partie 2: Spécification et définition des Spezifikation und Dienstfestlegungen des Physical Layer
services de la couche physique (Bitübertragungsschicht)
(CEI 61158-2:2014) (IEC 61158-2:2014)
This European Standard was approved by CENELEC on 2014-08-21. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 61158-2:2014 E

---------------------- Page: 3 ----------------------

SIST EN 61158-2:2015
EN 61158-2:2014 - 2 -
Foreword
The text of document 65C/758A/FDIS, future edition 6 of IEC 61158-2, prepared by SC 65C "Industrial
networks" of IEC/TC 65 "Industrial-process measurement, control and automation" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 61158-2:2014.
The following dates are fixed:
(dop) 2015-05-21
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2017-08-21
• latest date by which the national standards conflicting with
the document have to be withdrawn

This document supersedes EN 61158-2:2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association.
Endorsement notice
The text of the International Standard IEC 61158-2:2014 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60079-0 NOTE Harmonized as EN 60079-0.
IEC 60875-1 NOTE Harmonized as EN 60875-1.
IEC 60947-5-2 NOTE Harmonized as EN 60947-5-2.
IEC 61158 NOTE Harmonized as EN 61158 series.
IEC 61158-1:2014 NOTE Harmonized as EN
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.