EN 140401-801:2002

Detail Specification: Fixed low power non wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,1; 0,25; 0,5; 1

Supersedes CECC 40 401-801:1998* Superseded by EN 140401-801:2007

Bauartspezifikation: Oberflächenmontierbare nichtdrachtgewickelte Festwiderstände (SMD) niedriger Belastbarkeit - Rechteckig - Stabilitätsklassen 0,1; 0,25; 0,5; 1

Spécification particulière: Résistances fixes non bobinées à faible dissipation pour montage en surface (CMS) - Rectangulaires - Catégories de stabilité 0,1; 0,25; 0,5; 1

Detail Specification: Fixed low power non wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,1; 0,25; 0,5; 1

General Information

• Status: Withdrawn
• Publication Date: 22-May-2002
• Withdrawal Date: 30-Nov-2004
• ICS: 31.040.10 - Fixed resistors
• Technical Committee: CLC/TC 40XB - CLC/TC 40XB
• Drafting Committee: IEC/TC 40 - IEC_TC_40
• Parallel Committee: IEC/TC 40 - IEC_TC_40
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-May-2010
• Completion Date: 01-May-2010
• Ref Project: SIST EN 140401-801:2003 - Detail Specification: Fixed low power non wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,1; 0,25; 0,5; 1

Relations

• Replaced By: EN 140401-801:2007 - Detail specification: Fixed low power film SMD resistors - Rectangular - Stability classes 0,1; 0,25; 0,5; 1
• Effective Date: 28-Jan-2023
• Amended By: EN 140401-801:2002/A1:2003 - Detail Specification: Fixed low power non wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,1; 0,25; 0,5; 1
• Effective Date: 29-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Detail Specification: Fixed low power non wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,1; 0,25; 0,5; 1Detail Specification: Fixed low power non wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,1; 0,25; 0,5; 1Spcification particulire: Rsistances fixes non bobines
faible dissipation pour montage en surface (CMS) - Rectangulaires - Catgories de stabilit 0,1; 0,25; 0,5; 1Bauartspezifikation: Oberflchenmontierbare nichtdrachtgewickelte Festwiderstnde (SMD) niedriger Belastbarkeit - Rechteckig - Stabilittsklassen 0,1; 0,25; 0,5; 1Ta slovenski standard je istoveten z:EN 140401-801:2002SIST EN 140401-801:2003en31.040.10Fiksni uporFixed resistorsICS:SLOVENSKI
STANDARDSIST EN 140401-801:200301-oktober-2003

EUROPEAN STANDARDEN 140401-801NORME EUROPÉENNEEUROPÄISCHE NORMMay 2002CENELECEuropean Committee for Electrotechnical StandardizationComité Européen de Normalisation ElectrotechniqueEuropäisches Komitee für Elektrotechnische NormungCentral Secretariat: rue de Stassart 35, B - 1050 Brussels© 2002 CENELEC -All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.Ref. No. EN 140401-801:2002 EICS 31.040.10Supersedes CECC 40 401-801:1998English versionDetail Specification:Fixed low power non wire-wound surface mount (SMD) resistors -Rectangular -Stability classes 0,1; 0,25; 0,5; 1Spécification particulière:Résistances fixes non bobinéesà faible dissipation pour montageen surface (CMS) -Rectangulaires -Catégories de stabilité 0,1; 0,25; 0,5; 1Bauartspezifikation:Oberflächenmontierbare nichtdracht-gewickelte Festwiderstände (SMD)niedriger Belastbarkeit -Rechteckig -Stabilitätsklassen 0,1; 0,25; 0,5; 1This European Standard was approved by CENELEC on 2001-12-01. CENELEC members are bound tocomply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving thisEuropean Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained onapplication to the Central Secretariat or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in anyother language made by translation under the responsibility of a CENELEC member into its ownlanguage and notified to the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.

– 3 –EN 140401-801:2002Contents1Characteristics and ratings.41.1Dimensions and Ratings.41.2Derating curve.51.3Resistance range and tolerance on rated resistance.61.4Variation of resistance with temperature and temperature rise.71.5Climatic categories.81.6Limits for change of resistance at tests.81.7Non-linear properties.91.8Marking, packaging and ordering designation.91.8.1Component.91.8.2Package.101.8.3Packaging / Taping.101.8.4Ordering information.101.9Additional information (not for inspection purpose).101.9.1Storage.101.9.2Mounting.101.9.3Soldering process.101.9.4Conductive glueing.111.9.5Use of cleaning solvents.111.9.6Pulse load capability.111.9.7Variation of resistance value (drift) for lifetimes up to 200 000 h.141.9.8Dissipation notes.151.9.9Current noise.162Quality assessment procedures.162.1General.162.1.1Zero defect approach.162.1.2100 %-Test.162.1.30
-Resistor.172.1.4Certificate of Conformity (CoC).172.1.5Certified test records.172.1.6Failure rate level (only version E).172.2Qualification Approval.172.2.1Version A.172.2.2Version E.172.3Quality conformance inspection.172.3.1Qualification approval according to EN 100114-2.172.3.2Technology approval according to EN 100114-6.172.3.3Non-conforming items.18Annex A (normative)
Fixed sample size Qualification Approval and Quality ConformanceInspection test schedule for fixed low power surface mount (SMD) resistors.19Annex B (informative)
Letter symbols and abbreviations.23Annex C (normative)
Standards referred to in this specification.24

this component are precisely specified in this specification. Unspecified parameters may varyfrom one component to another.1.1 Dimensions and ratingsTable 1 – Style and dimensionsStyleLength LmmWidth WmmHeight HmmTermination TmmWeightamgmetricinchmin.max.min.max.min.max.min.max.max.RR 1005MRR 04020,951,100,450,600,250,400,05/0,1b0,350,8RR 1608MRR 06031,501,700,750,950,350,550,100,502,1RR 2012MRR 08051,852,151,101,400,350,650,150,606,0RR 3216MRR 12062,903,351,451,750,350,650,250,7510,0a For information only.b First figure indicates the termination width on the film side, second figure on the reverse side.Termination: WT
0,75 · WThickness: 0,005 to 0,05 mmTable 2a – Ratings for stability classes 1; 0,5; 0,25StyleStabilityclassRated dissipationP70mWLimiting element voltaged.c. or a.c. (r.m.s) UmaxVInsulation voltaged.c. or a.c. (peak) UinsV1 mincontinuousRR 1005M1; 0,5; 0,2563507575RR 1608M1; 0,5; 0,251007510075RR 2012M1; 0,5; 0,2512515020075RR 3216M1; 0,5; 0,2525020030075Information about manufacturers who have components qualified to this detail specification is available in thecurrent CECC 00 200: Register of Approvals

– 5 –EN 140401-801:2002Table 2b – Ratings for stability class 0,1StyleStabilityclassRated dissipationP70mWLimiting element voltaged.c. or a.c. (r.m.s) UmaxVInsulation voltaged.c. or a.c. (peak) UinsV1 mincontinuousRR 1005M0,11612,57575RR 1608M0,1322510075RR 2012M0,1503520075RR 3216M0,11005030075Table 2c – Ratings for 0
resistorsMaximum currentImaxAMaximum resistance valueaRmaxmInsulation voltaged.c. or a.c. (peak) UinsVStyle1 mincontinuousRR 1005M0,63207575RR 1608M12010075RR 2012M1,52020075RR 3216M2,02030075a The resistance value shall be measured on the film side.1.2 Derating curveResistors covered by this specification are derated according to the following diagram:-50°C0°C50°C70°C100°C0%25%50%75%100%+85°C-10°CUpper categorytemperature (UCT)Lower categorytemperature (LCT)+125°C-55°CPercentage of rated dissipationAmbient Temperature aFigure 2 – Derating curveFor the category temperatures of stability classes refer to Table 6.

to 33,2 k0,5>33,2 k to 1± 0,5D± 50; ± 2510
to 33,2 k0,5>33,2 k to 1± 0,25C± 25; ± 15; ± 1043
to 33,2 k0,25100
to 10 k0,1± 0,1B± 25; ± 15; ± 10100
to 33,2 k0,25100
to 10 k0,1RR 1608M± 1F± 50; ± 251
to <10 110
to 100 k0,5>100 k to 1 M1± 0,5D± 50; ± 2510
to 100 k0,5>100 k to 1± 0,25C± 25; ± 15; ± 1043
to 100 k0,25100
to 10 k0,1± 0,1B± 25; ± 15; ± 10100
to 100 k0,25100
to 10 k0,1RR 2012M± 1F± 50; ± 251
to <10 110
to 221 k0,5>221 k to 1 M1± 0,5D± 50; ± 2510
to 221 k0,5>221 k to 1± 0,25C± 25; ± 15; ± 1043
to 221 k0,25100
to 47,5 k0,1± 0,1B± 25; ± 15; ± 10100
to 100 k0,25100
to 47,5 k0,1RR 3216M± 1F± 50; ± 251
to <10 110
to 332 k0,5>332 k to 1 M1± 0,5D± 50; ± 251
to <10 110
to 332 k0,5>332 k to 1 M1± 0,25C± 25; ± 15; ± 1043
to 332 k0,2543
to 332 k0,1± 0,1B± 25; ± 15; ± 1043
to 332 k0,2543
to 332 k0,10 -resistors according to Table 2c for all styles.a Code letters according to EN 60062.

– 7 –EN 140401-801:2002Version E:The following combinations of temperature coefficient, tolerance on rated resistance and E-series according toIEC 60063 shall be used for qualification approval according to 2.2.2 and quality conformance inspection according to2.3 and
...