EN 140401-801:2002/A1:2003
(Amendment)Detail Specification: Fixed low power non wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,1; 0,25; 0,5; 1
Detail Specification: Fixed low power non wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,1; 0,25; 0,5; 1
* Superseded by EN 140401-801:2007
Bauartspezifikation: Oberflächenmontierbare nichtdrachtgewickelte Festwiderstände (SMD) niedriger Belastbarkeit - Rechteckig - Stabilitätsklassen 0,1; 0,25; 0,5; 1
Spécification particulière: Résistances fixes non bobinées à faible dissipation pour montage en surface (CMS) - Rectangulaires - Catégories de stabilité 0,1; 0,25; 0,5; 1
Detail specification: Fixed low power non wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,1; 0,25; 0,5, 1 - New Style RR 5025M
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2003
Detail specification: Fixed low power non wire-wound surface mount (SMD)
resistors - Rectangular - Stability classes 0,1; 0,25; 0,5, 1 - New Style RR 5025M
Detail Specification: Fixed low power non wire-wound surface mount (SMD) resistors -
Rectangular - Stability classes 0,1; 0,25; 0,5; 1
Bauartspezifikation: Oberflchenmontierbare nichtdrachtgewickelte Festwiderstnde (SMD)
niedriger Belastbarkeit - Rechteckig - Stabilittsklassen 0,1; 0,25; 0,5; 1
Spcification particulire: Rsistances fixes non bobines faible dissipation pour montage en
surface (CMS) - Rectangulaires - Catgories de stabilit 0,1; 0,25; 0,5; 1
Ta slovenski standard je istoveten z: EN 140401-801:2002/A1:2003
ICS:
31.040.10 Fiksni upor Fixed resistors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 140401-801/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2003
ICS 31.040.10
English version
Detail Specification:
Fixed low power non wire-wound surface mount (SMD) resistors –
Rectangular –
Stability classes 0,1; 0,25; 0,5; 1
Spécification particulière: Bauartspezifikation:
Résistances fixes non bobinées à faible Oberflächenmontierbare
dissipation pour montage en surface nichtdrachtgewickelte Festwiderstände
(CMS) – (SMD) niedriger Belastbarkeit –
Rectangulaires – Rechteckig –
Catégories de stabilité 0,1; 0,25; 0,5; 1 Stabilitätsklassen 0,1; 0,25; 0,5; 1
This amendment A1 modifies the European Standard EN 140401-801:2002; it was approved by
CENELEC on 2003-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal
Regulations which stipulate the conditions for giving this amendment the status of a national standard without
any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 140401-801:2002/A1:2003 E
Foreword
This amendment was prepared by the Technical Committee CENELEC TC 40XB, Resistors.
This amendment results from two draft amendments which were submitted to the Unique Acceptance Procedure
(prA1 and prAA) and were approved by CENELEC as amendment A1 to EN 140401-801:2002 on 2003-04-01.
The following dates were fixed:
- latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-04-01
- latest date by which the national standards conflicting
with the amendment have t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.