Coaxial cables - Part 2-5: Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 3 000 MHz

SC advice: CPD requires product specifications to establish Euro classes

Koaxialkabel - Teil 2-5: Rahmenspezifikation für Kabel für Kabelverteilanlagen - Außenkabel im Bereich von 5 MHz - 3 000 MHz

Câbles coaxiaux - Partie 2-5: Spécification intermédiaire pour câbles utilisés dans les réseaux de distribution par câbles - Câbles de raccordement à usage extérieur pour les systèmes fonctionnant à 5 MHz - 3 000 MHz

Koaksialni kabli - 2-5. del: Področna specifikacija za kable v kabelskih razdelilnih omrežjih - Zunanji priključni kabli za sisteme, ki delujejo v območju 5 MHz do 3.000 MHz

Ta evropski standard je povezan s standardom EN 50117-1 in ga je treba brati skupaj s to rodovno specifikacijo. Ta specifikacija velja za zunanje priključne kable v kabelskih razdelilnih sistemih, ki delujejo pri temperaturi med –40 °C in +70 °C 1) in pri frekvencah med 5 MHz in 3 000 MHz ter ustrezajo zahtevam standarda EN 50083. Namen tega evropskega standarda je določiti veljavne preskusne metode in zahteve za električne, mehanske, okoljske in požarne lastnosti kablov.

General Information

Status
Withdrawn
Publication Date
05-Feb-2008
Withdrawal Date
30-Nov-2010
Drafting Committee
Parallel Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
29-Mar-2022
Completion Date
29-Mar-2022

Relations

Buy Standard

Amendment
EN 50117-2-5:2005/A1:2008
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50117-2-5:2005/A1:2008
01-april-2008
.RDNVLDOQLNDEOLGHO3RGURþQDVSHFLILNDFLMD]DNDEOHYNDEHOVNLKUD]GHOLOQLK
RPUHåMLK=XQDQMLSULNOMXþQLNDEOL]DVLVWHPHNLGHOXMHMRYREPRþMX0+]GR
0+]
Coaxial cables - Part 2-5: Sectional specification for cables used in cabled distribution
networks - Outdoor drop cables for systems operating at 5 MHz - 3 000 MHz
Koaxialkabel - Teil 2-5: Rahmenspezifikation für Kabel für Kabelverteilanlagen -
Aussenkabel im Bereich von 5 MHz - 3 000 MHz
Câbles coaxiaux - Partie 2-5: Spécification intermédiaire pour câbles utilisés dans les
réseaux de distribution par câbles - Câbles de raccordement a usage extérieur pour les
systemes fonctionnant a 5 MHz - 3 000 MHz
Ta slovenski standard je istoveten z: EN 50117-2-5:2004/A1:2008
ICS:
33.120.10
SIST EN 50117-2-5:2005/A1:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 50117-2-5/A1

NORME EUROPÉENNE
February 2008
EUROPÄISCHE NORM

ICS 33.120.10


English version


Coaxial cables -
Part 2-5: Sectional specification for cables
used in cabled distribution networks -
Outdoor drop cables for systems operating at 5 MHz - 3 000 MHz



Câbles coaxiaux -  Koaxialkabel -
Partie 2-5: Spécification intermédiaire Teil 2-5: Rahmenspezifikation
pour câbles utilisés dans les réseaux für Kabel für Kabelverteilanlagen -
de distribution par câbles - Aussenkabel im Bereich
Câbles de raccordement à usage von 5 MHz - 3 000 MHz
extérieur pour les systèmes
fonctionnant à 5 MHz - 3 000 MHz





This amendment A1 modifies the European Standard EN 50117-2-5:2004; it was approved by CENELEC on
2007-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50117-2-5:2004/A1:2008 E

---------------------- Page: 2 ----------------------

EN 50117-2-5:2004/A1:2008 - 2 -
Foreword

This amendment to the European Standard EN 50117-2-5:2004 was prepared by SC 46XA, Coaxial
cables, of Technical Committee CENELEC TC 46X, Communication cables.

The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC
as amendment A1 to EN 50117-2-5:2004 on 2007-12-01.

The following dates were fixed:

– latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-12-01

– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2010-12-01
__________

---------------------- Page: 3 ----------------------

- 3 - EN 50117-2-5:2004/A1:2008
3 Definitions

Add after the first paragraph:

The definition of a drop coaxial cable is one of use or intended use and application within the network
rather than by specific constructional requirements of the cable itself.

3.1
drop cable
coaxial cable which is used to connect from
a) subscriber tap or a directional coupler to a system outlet,
b) subscriber tap to a subscriber splitter,
c) subscriber splitter to a system outlet


4 Requirements for cable construction

4.14 Cable identification

4.14.1 Sheath marking

Add the following note:

NOTE  The Construction Products Directive (CPD) will define classes for the fire performance of cables. As long as the CPD is
under consideration and fire performance classes (Euroclasses) are not defined, sheath marking with Euroclass is not required.

Table 2 – High-frequency electrical and transmission measurements

Replac
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.