EN 62604-1:2015
(Main)Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality - Part 1: Generic specification
Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality - Part 1: Generic specification
IEC 62604-1:2015 specifies the methods of test and general requirements for SAW and BAW duplexers of assessed quality using either capability approval or qualification approval procedures.
Oberflächenwellen-(OFW-) und Volumenwellen-(BAW-)Duplexer mit bewerteter Qualität – Teil 1: Fachgrundspezifikation
Duplexeurs à ondes acoustiques de surface (OAS) et à ondes acoustiques de volume (OAV) sous assurance de la qualité - Partie 1: Spécification générique
IEC 62604-1:2015 spécifie les méthodes d'essai et les exigences générales pour les duplexeurs à OAS et à OAV dont la qualité est garantie par les procédures d'agrément de savoir-faire ou par les procédures d'homologation.
Radiofrekvenčni (SAW) in visokofrekvenčni (BAW) duplekserji ocenjene kakovosti - 1. del: Splošna specifikacija
Ta del standarda IEC 62604 določa preskusne metode in splošne zahteve za radiofrekvenčne (SAW) in visokofrekvenčne (BAW) duplekserje ocenjene kakovosti, ki vključujejo postopke za odobritev zmogljivosti ali kvalifikacije.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2015
5DGLRIUHNYHQþQL 6$: LQYLVRNRIUHNYHQþQL %$: GXSOHNVHUMLRFHQMHQHNDNRYRVWL
GHO 6SORãQDVSHFLILNDFLMD
Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed
quality - Part 1: Generic specification
Duplexeurs à ondes acoustiques de surface (OAS) et à ondes acoustiques de volume
(OAV) sous assurance de la qualité - Partie 1: Spécification générique
Ta slovenski standard je istoveten z: EN 62604-1:2015
ICS:
31.140 3LH]RHOHNWULþQHLQ Piezoelectric and dielectric
GLHOHNWULþQHQDSUDYH devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 62604-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2015
ICS 31.140
English Version
Surface acoustic wave (SAW) and bulk acoustic wave (BAW)
duplexers of assessed quality - Part 1: Generic specification
(IEC 62604-1:2015)
Duplexeurs à ondes acoustiques de surface (OAS) et à Oberflächenwellen-(OFW-) und Volumenwellen-(BAW-)
ondes acoustiques de volume (OAV) sous assurance de la Duplexer mit bewerteter Qualität - Teil 1:
qualité - Partie 1: Spécification générique Fachgrundspezifikation
(IEC 62604-1:2015) (IEC 62604-1:2015)
This European Standard was approved by CENELEC on 2015-08-20. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62604-1:2015 E
European foreword
The text of document 49/1143/FDIS, future edition 1 of IEC 62604-1, prepared by IEC/TC 49
"Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control,
selection and detection" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 62604-1:2015.
The following dates are fixed:
• latest date by which the document has to be implemented at (dop) 2016-05-20
national level by publication of an identical national
standard or by endorsement
(dow) 2018-08-20
• latest date by which the national standards conflicting with
the document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62604-1:2015 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60068-2-10:2005 NOTE Harmonized as EN 60068-2-10:2005 (not modified).
IEC 60862-1:2003 NOTE Harmonized as EN 60862-1:2003 (not modified).
IEC 60862-2:2012 NOTE Harmonized as EN 60862-2:2012 (not modified).
IEC 61019-1:2004 NOTE Harmonized as EN 61019-1:2005 (not modified).
IEC 62047-7:2011 NOTE Harmonized as EN 62047-7:2011 (not modified).
IEC 62604-2:2011 NOTE Harmonized as EN 62604-2:2012 (not modified).
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60027 series Letter symbols to be used in electrical - -
technology
IEC 60050 series International Electrotechnical Vocabulary - -
IEC 60068-1 2013 Environmental testing - EN 60068-1 2014
Part 1: General and guidance
IEC 60068-2-1 - Environmental testing - EN 60068-2-1 -
Part 2-1: Tests - Test A: Cold
IEC 60068-2-2 - Environmental testing - EN 60068-2-2 -
Part 2-2: Tests - Test B: Dry heat
IEC 60068-2-6 - Environmental testing - EN 60068-2-6 -
Part 2-6: Tests - Test Fc: Vibration
(sinusoidal)
IEC 60068-2-7 - Basic environmental testing procedures - EN 60068-2-7 -
Part 2-7: Tests - Test Ga and guidance:
Acceleration, steady state
IEC 60068-2-13 - Basic environmental testing procedures - EN 60068-2-13 -
Part 2-13: Tests - Test M: Low air pressure
IEC 60068-2-14 - Environmental testing - EN 60068-2-14 -
Part 2-14: Tests - Test N: Change of
temperature
IEC 60068-2-17 1994 Basic environmental testing procedures - EN 60068-2-17 1994
Part 2-17: Tests - Test Q: Sealing
IEC 60068-2-27 - Environmental testing - EN 60068-2-27 -
Part 2-27: Tests - Test Ea and guidance:
Shock
IEC 60068-2-30 - Environmental testing - EN 60068-2-30 -
Part 2-30: Tests - Test Db: Damp heat,
cyclic (12 h + 12 h cycle)
Publication Year Title EN/HD Year
IEC 60068-2-31 - Environmental testing - EN 60068-2-31 -
Part 2-31: Tests - Test Ec: Rough handling
shocks, primarily for equipment-type
specimens
IEC 60068-2-45 - Basic environmental testing procedures - EN 60068-2-45 -
Part 2-45: Tests - Test XA and guidance:
Immersion in cleaning solvents
IEC 60068-2-52 - Environmental testing - EN 60068-2-52 -
Part 2-52: Tests - Test Kb: Salt mist, cyclic
(sodium chloride solution)
IEC 60068-2-58 - Environmental testing - EN 60068-2-58 -
Part 2-58: Tests - Test Td: Test methods
for solderability, resistance to dissolution of
metallization and to soldering heat of
surface mounting devices (SMD)
IEC 60068-2-64 - Environmental testing - EN 60068-2-64 -
Part 2-64: Tests - Test Fh: Vibration,
broadband random and guidance
IEC 60068-2-78 - Environmental testing - EN 60068-2-78 -
Part 2-78: Tests - Test Cab: Damp heat,
steady state
IEC 60122-1 - Quartz crystal units of assessed quality - EN 60122-1 -
Part 1: Generic specification
IEC 60617-DB - Graphical symbols for diagrams - -
IEC 60642 - Piezoelectric ceramic resonators and - -
resonator units for frequency control and
selection - Chapter I: Standard values and
conditions - Chapter II: Measuring and test
conditions
IEC 60695-11-5 - Fire hazard testing - EN 60695-11-5 -
Part 11-5: Test flames - Needle-flame test
method - Apparatus, confirmatory test
arrangement and guidance
1) 1)
IEC 60749-28 - Semiconductor devices - Mechanical and FprEN 60749-28 -
climatic test methods -
Part 28: Electrostatic Discharge (ESD)
Sensitivity Testing Direct contact charged
device model (DC-CDM)
IEC 61000-4-2 - Electromagnetic compatibility (EMC) - EN 61000-4-2 -
Part 4-2: Testing and measurement
techniques - Electrostatic discharge
immunity test
IEC 61340-3-1 - Electrostatics - EN 61340-3-1 -
Part 3-1: Methods for simulation of
electrostatic effects - Human body model
(HBM) electrostatic discharge test
waveforms
1) At draft stage.
Publication Year Title EN/HD Year
IEC 61340-3-2 - Electrostatics - EN 61340-3-2 -
Part 3-2: Methods for simulation of
electrostatic effects - Machine model (MM)
electrostatic discharge test waveforms
IEC 62761 - Guidelines for the measurement method of EN 62761 -
nonlinearity for surface acoustic wave
(SAW) and bulk acoustic wave (BAW)
devices in radio frequency (RF)
IEC 80000 series Quantities and units EN 80000 series
ISO 80000 series Quantities and units - EN ISO 80000 series
IEC 62604-1 ®
Edition 1.0 2015-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of
assessed quality –
Part 1: Generic specification
Duplexeurs a ondes acoustiques de surface (OAS) et a ondes acoustiques de
volume (OAV) sous assurance de la qualite –
Partie 1: Spécification générique
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.140 ISBN 978-2-8322-2777-0
– 2 – IEC 62604-1:2015 © IEC 2015
CONTENTS
FOREWORD . 5
1 Scope . 7
2 Normative references . 7
3 Terms, definitions, units and symbols . 8
3.1 Terms and definitions . 8
3.1.1 General terms . 9
3.1.2 Response characteristics related terms . 10
3.1.3 SAW and BAW duplexers related terms . 14
3.2 Units and graphical symbols . 16
4 Order of precedence of documents . 16
5 Preferred values for ratings and characteristics . 16
5.1 General . 16
5.2 Nominal frequency bands . 16
5.3 Operating temperature ranges, in degrees Celsius (°C) . 16
5.4 Climatic category . 17
5.5 Bump severity . 17
5.6 Vibration severity . 17
5.7 Shock severity . 18
5.8 Fine leak rate . 18
6 Marking . 18
6.1 Duplexer marking . 18
6.2 Package marking . 18
7 Quality assessment procedures . 19
7.1 General . 19
7.2 Primary stage of manufacture . 19
7.3 Structurally similar components . 19
7.4 Subcontracting . 19
7.5 Incorporated components . 19
7.6 Manufacturer’s approval . 19
7.7 Approval procedures . 19
7.7.1 General . 19
7.7.2 Capability approval . 19
7.7.3 Qualification approval . 20
7.8 Procedures for capability approval .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.