EN 60191-6-13:2016
(Main)Mechanical standardization of semiconductor devices - Part 6-13: Design guideline of open-top-type sockets for Fine-pitch Ball Grid Array (FBGA) and Fine-pitch Land Grid Array (FLGA)
Mechanical standardization of semiconductor devices - Part 6-13: Design guideline of open-top-type sockets for Fine-pitch Ball Grid Array (FBGA) and Fine-pitch Land Grid Array (FLGA)
IEC 60191-6-13:2016 specifies a design guideline of open-top-type semiconductor sockets for Fine-pitch Ball Grid Array (FBGA) and Fine-pitch Land Grid Array (FLGA). In particular, this part of IEC 60191 establishes the outline drawings and dimensions of the open-top-type test and burn-in sockets applied to FBGA and FLGA. This edition includes the following significant technical changes with respect to the previous edition: a) BGA package nominal length and width have been newly expanded to 43 mm and 43 mm, respectively. Accordingly, six socket sizes have been added to the socket group numbers 1, 2 and 3, and twenty-two socket sizes have been added to the socket group number 4.
Mechanische Normung von Halbleiterbauelementen - Teil 6-13: Konstruktionsleitfaden für Open-top-Fassungen für Feinraster-Ball-Grid-Array und Feinraster-Land-Grid-Array (FBGA/FLGA)
Normalisation mécanique des dispositifs à semiconducteurs - Partie 6-13: Guide de conception pour les supports sans couvercle pour les boîtiers matriciels à billes et à pas fins (FBGA) et les boîtiers matriciels à zone de contact plate et à pas fins (FLGA)
L'IEC 60191-6-13:2016 spécifie un guide de conception des supports à semiconducteurs sans couvercle pour les boîtiers matriciels à billes et à pas fins (FBGA, fine-pitch ball grid array) et les boîtiers matriciels à zone de contact plate et à pas fins (FLGA, fine-pitch land grid array). En particulier, la présente partie de l'IEC 60191 établit les dessins d'encombrement et les dimensions des supports sans couvercle d'essais et de rodage appliqués aux FBGA et aux FLGA. La présente édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) La longueur et la largeur nominales du boîtier BGA ont récemment été étendues respectivement à 43 mm et 43 mm. En conséquence, six tailles de supports ont été ajoutées aux groupes de supports numéros 1, 2 et 3, et vingt-deux tailles de supports ont été ajoutées au groupe de support numéro 4.
Standardizacija mehanskih lastnosti polprevodniških elementov - 6-13. del: Smernica za načrtovanje zgoraj odprtih podstavkov za fini raster mreže krogličnih priključkov in fini raster mreže priključkov v ravnini (FBGA/FLGA) (IEC 60191-6-13:2016)
Ta del standarda IEC 60191 določa smernice za načrtovanje zgoraj odprtih polprevodniških podstavkov za fini raster mreže krogličnih priključkov (FBGA) in fini raster mreže priključkov v ravnini (FLGA). Ta del standarda IEC 60191 zlasti opredeljuje risanje osnutkov in dimenzije zgoraj odprtih preskusnih in vžganih podstavkov, ki se uporabljajo za fini raster mreže krogličnih priključkov in fini raster mreže priključkov v ravnini.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60191-6-13:2017
01-januar-2017
1DGRPHãþD
SIST EN 60191-6-13:2008
6WDQGDUGL]DFLMDPHKDQVNLKODVWQRVWLSROSUHYRGQLãNLKHOHPHQWRYGHO
6PHUQLFD]DQDþUWRYDQMH]JRUDMRGSUWLKSRGVWDYNRY]DILQLUDVWHUPUHåHNURJOLþQLK
SULNOMXþNRYLQILQLUDVWHUPUHåHSULNOMXþNRYYUDYQLQL )%*$)/*$ ,(&
Mechanical standardization of semiconductor devices - Part 6-13: Design guideline of
open-top type sockets for Fine-pitch Ball Grid Array and Fine-pitch Land Grid Array
(FBGA/FLGA) (IEC 60191-6-13:2016)
Mechanische Normung von Halbleiterbauelementen -Teil 6-13: Konstruktionsleitfaden für
Open-top-Fassungen für Feinraster-Ball-Grid-Array und Feinraster-Land-Grid-Array
(FBGA/FLGA) (IEC 60191-6-13:2016)
Normalisation mécanique des dispositifs à semiconducteurs - Partie 6-13: Guide de
conception pour les supports sans couvercle pour les boîtiers matriciels à billes et à pas
fins et les boîtiers matriciels à zone de contact plate et à pas fins (FBGA/FLGA) (IEC
60191-6-13:2016)
Ta slovenski standard je istoveten z: EN 60191-6-13:2016
ICS:
31.080.01 Polprevodniški elementi Semiconductor devices in
(naprave) na splošno general
SIST EN 60191-6-13:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60191-6-13:2017
---------------------- Page: 2 ----------------------
SIST EN 60191-6-13:2017
EUROPEAN STANDARD EN 60191-6-13
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2016
ICS 31.080.01 Supersedes EN 60191-6-13:2007
English Version
Mechanical standardization of semiconductor devices -
Part 6-13: Design guideline of open-top-type sockets for Fine-
pitch Ball Grid Array (FBGA) and Fine-pitch Land Grid Array
(FLGA)
(IEC 60191-6-13:2016)
Normalisation mécanique des dispositifs à semiconducteurs Mechanische Normung von Halbleiterbauelementen -
- Partie 6-13: Guide de conception pour les supports sans Teil 6-13: Konstruktionsleitfaden für Open-top-Fassungen
couvercle pour les boîtiers matriciels à billes et à pas fins für Feinraster-Ball-Grid-Array und Feinraster-Land-Grid-
(FBGA) et les boîtiers matriciels à zone de contact plate et Array (FBGA/FLGA)
à pas fins (FLGA) (IEC 60191-6-13:2016)
(IEC 60191-6-13:2016)
This European Standard was approved by CENELEC on 2016-11-01. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60191-6-13:2016 E
---------------------- Page: 3 ----------------------
SIST EN 60191-6-13:2017
EN 60191-6-13:2016
European foreword
The text of document 47D/878/FDIS, future edition 2 of IEC 60191-6-13, prepared by
SC 47D "Semiconductor devices packaging" of IEC/TC 47 "Semiconductor devices" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 60191-6-13:2016.
The following dates are fixed:
(dop) 2017-08-01
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2019-11-01
standards conflicting with the
document have to be withdrawn
This document supersedes EN 60191-6-13:2007.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60191-6-13:2016 was approved by CENELEC as a
European Standard wit
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.