EN 62733:2015

Programmable components in electronic lamp controlgear - General and safety requirements

IEC 62733:2015 provides general and safety requirements for programmable components used in products covered by IEC 61347. The requirements of this standard are only applicable to the programmable components (including its embedded software) in the electronic lamp controlgear. For other electric/electronic circuits and their components in the electronic lamp controlgear, the requirements of IEC 61347 series apply.

Programmierbare Bauteile von elektronischen Betriebsgeräten für Lampen - Allgemeine und Sicherheitsanforderungen

Composants programmables dans les appareillages électroniques de lampes - Exigences générales et exigences de sécurité

L'IEC 62733:2015 définit les exigences générales et les exigences de sécurité des composants programmables utilisés dans les produits couverts par l'IEC 61347. Les exigences de la présente norme s'appliquent uniquement aux composants programmables (et leurs logiciels intégrés) des appareillages électroniques de lampes. Pour les autres circuits électriques/électroniques et leurs composants dans les appareillages électroniques de lampes, les exigences de la série IEC 61347 s'appliquent.

Programirljive komponente krmilja elektronske sijalke - Splošne in varnostne zahteve

Ta mednarodni standard zagotavlja splošne in varnostne zahteve za programirljive komponente, ki se uporabljajo v izdelkih iz standarda IEC 61347.
Zahteve tega standarda se uporabljajo samo za programirljive komponente (vključno z njihovo vdelano programsko opremo) v krmilju elektronske sijalke. Za druga električna/elektronska vezja in njihove komponente v krmilju elektronske sijalke se uporabljajo zahteve standarda IEC 61347.

General Information

• Status: Published
• Publication Date: 25-Jun-2015
• Withdrawal Date: 10-Jun-2018
• ICS: 29.140.99 - Other standards related to lamps
• Technical Committee: CLC/TC 34 - 'Lamps and related equipment
• Drafting Committee: IEC/SC 34C - IEC_SC_34C
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 26-Jun-2015
• Completion Date: 26-Jun-2015
• Ref Project: SIST EN 62733:2015 - Programmable components in electronic lamp controlgear - General and safety requirements

Relations

• Corrected By: EN 62733:2015/AC:2017-09 - Programmable components in electronic lamp controlgear - General and safety requirements
• Effective Date: 29-Aug-2017

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62733:2015
01-september-2015
Programirljive komponente krmilja elektronske sijalke - Splošne in varnostne
zahteve
Programmable components in electronic lamp controlgear - General and safety
requirements
Programmierbare Bauteile von elektronischen Betriebsgeräten für Lampen - Teil 1:
Allgemeine und Sicherheitsanforderungen
Composants programmables dans les appareillages électroniques de lampes -
Exigences générales et exigences de sécurité
Ta slovenski standard je istoveten z: EN 62733:2015
ICS:
29.130.01 Stikalne in krmilne naprave Switchgear and controlgear
na splošno in general
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
SIST EN 62733:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62733:2015

---------------------- Page: 2 ----------------------

SIST EN 62733:2015


EUROPEAN STANDARD EN 62733

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2015
ICS 29.140.99

English Version
Programmable components in electronic lamp controlgear -
General and safety requirements
(IEC 62733:2015)
Composants programmables dans les appareillages Programmierbare Bauteile von elektronischen
électroniques de lampes - Exigences générales et Betriebsgeräten für Lampen - Teil 1: Allgemeine und
exigences de sécurité Sicherheitsanforderungen
(IEC 62733:2015) (IEC 62733:2015)
This European Standard was approved by CENELEC on 2015-06-11. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62733:2015 E

---------------------- Page: 3 ----------------------

SIST EN 62733:2015
EN 62733:2015
European foreword
The text of document 34C/1140/FDIS, future edition 1 of IEC 62733, prepared by SC 34C, "Auxiliaries for
lamps", of IEC TC 34, "Lamps and related equipment", was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN 62733:2015.
The following dates are fixed:
(dop) 2016-03-11
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2018-06-11
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 62733:2015 was approved by CENELEC as a European
Standard without any modification.

2

---------------------- Page: 4 ----------------------

SIST EN 62733:2015
 EN 62733:2015

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD

applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year

IEC 61000-4-13 2002 Electromagnetic compatibility (EMC) -- Part EN 6100
...