EN 60061-1:1993/A43:2010
(Amendment)Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
Subscribe to IEC 60061 Database to access the full and updated content of the series.
Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und Sicherheit - Teil 1: Lampensockel
Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et de la sécurité - Partie 1: Culots de lampes
Subscribe to IEC 60061 Database to access the full and updated content of the series.
Vznožki in okovi žarnic in sijalk skupaj s kalibri za kontrolo medsebojne zamenljivosti in varnosti - 1. del: Vznožki žarnic in sijalk - Dopolnilo A43 (IEC 60061-1:1969/A43:2010)
Vsebuje priporočila IEC v zvezi z vznožki in okovi žarnic in sijalk , ki so danes v splošni rabi, skupaj z ustreznimi kalibri, s ciljem zagotoviti mednarodno medsebojno zamenljivost. Ponazorjeni kalibri, čeprav načeloma splošno sprejeti, niso nujno edina oblika, v kateri so lahko narejeni. Ponazorjeni kalibri, čeprav načeloma splošno sprejeti, niso nujno edina oblika, v kateri so lahko narejeni.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2010
Vznožki in okovi žarnic in sijalk skupaj s kalibri za kontrolo medsebojne
zamenljivosti in varnosti - 1. del: Vznožki žarnic in sijalk - Dopolnilo A43 (IEC
60061-1:1969/A43:2010)
Lamp caps and holders together with gauges for the control of interchangeability and
safety - Part 1: Lamp caps (IEC 60061-1:1969/A43:2010)
Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und
Sicherheit - Teil 1: Lampensockel (IEC 60061-1:1969/A43:2010)
Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et
de la sécurité - Partie 1: Culots de lampes (CEI 60061-1:1969/A43:2010)
Ta slovenski standard je istoveten z: EN 60061-1:1993/A43:2010
ICS:
29.140.10 Grla in držala žarnic Lamp caps and holders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 60061-1/A43
NORME EUROPÉENNE
October 2010
EUROPÄISCHE NORM
ICS 29.140.10
English version
Lamp caps and holders together with gauges for the control of
interchangeability and safety -
Part 1: Lamp caps
(IEC 60061-1:1969/A43:2010)
Culots de lampes et douilles ainsi que Lampensockel und -fassungen sowie
calibres pour le contrôle de Lehren zur Kontrolle der Austauschbarkeit
l'interchangeabilité et de la sécurité - und Sicherheit -
Partie 1: Culots de lampes Teil 1: Lampensockel
(CEI 60061-1:1969/A43:2010) (IEC 60061-1:1969/A43:2010)
This amendment A43 modifies the European Standard EN 60061-1:1993; it was approved by CENELEC on
2010-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60061-1:1993/A43:2010 E
Foreword
The text of document 34B/1487/FDIS, future amendment 43 to IEC 60061-1:1969, prepared by SC 34B,
Lamp caps and holders, of IEC TC 34, Lamps and related equipment, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as amendment A43 to EN 60061-1:1993 on
2010-10-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the amendment has to be
implemented at national level by publication of
an identical national standard or by endorsement (dop) 2011-07-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2013-10-01
__________
Endorsement notice
The text of amendment 43:2010 to the International Standard IEC 60061-1:1969 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________
NORME CEI
INTERNATIONALE IEC
INTERNATIONAL 60061-1
STANDARD
AMENDEMENT 43
AMENDMENT 43
2010-02
Amendement 43
Culots de lampes et douilles ainsi que calibres
pour le contrôle de l'interchangeabilité
et de la sécurité –
Partie 1:
Culots de lampes
Amendment 43
Lamp caps and holders together with
gauges for the control of interchangeability
and safety –
Part 1:
Lamp caps
Les feuilles de cet amendement sont à insérer dans la
CEI 60061-1 (2004)
The sheets contained in this amendment are to be inserted
in IEC 60061-1 (2004)
© IEC 2010 Droits de reproduction réservés ⎯ Copyright - all rights reserved
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
NORME CEI
INTERNATIONALE IEC
INTERNATIONAL
60061-1
STANDARD
Edition 3.43
2010-02
Modifiée selon les Compléments:
Amended in accordance with Supplements:
A(1970), B(1971), C(1972), D(1972), E(1972), F(1975), G(1977)
H(1977), J(1980), K(1983), L(1987), M(1989), N(1992), P(1994)
Q(1994), R(1995), S(1996), T(1996), U(1996), V(1997),
et les amendements/amendments 21(1998), 22(1999), 23(1999), 24(2000), 25(2001), 26(2001),
27(2001), 28(2002), 29(2002), 30(2002), 31(2003), 32(2003), 33 (2003), 34 (2004), 35 (2004),
36 (2005), 37 (2006), 38 (2007), 39 (2007), 40 (2008), 41 (2009), 42 (2009) et/and 43 (2010)
Culots de lampes et douilles ainsi que calibres
pour le contrôle de l'interchangeabilité
et de la sécurité –
Partie 1:
Culots de lampes
Lamp caps and holders together with
gauges for the control of interchangeability
and safety –
Part 1:
Lamp caps
© IEC 2010 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
60061-1 Amend. 43 © CEI/IEC:2010
SOMMAIRE CONTENTS
SOMMAIRE PAR DÉSIGNATION . Pages CONTENTS BY DESIGNATION . Page
PRÉAMBULE. 4 FOREWORD. 5
PRÉFACE. 4 PREFACE. 5
Feuilles Sheet
Culots à deux broches G1.27, GX1.27 & GY1.3 . 7004-2-2 Bi-pin caps G1.27, GX1.27 & GY1.3. 7004-2-2
Culots à deux broches G2.54, GX2.54 & GY2.5 . 7004-3-2 Bi-pin caps G2.54, GX2.54 & GY2.5. 7004-3-2
Culots à deux broches G3.17 & GY3.2. 7004-4-2 Bi-pin caps G3.17 & GY3.2 . 7004-4-2
Culots PX26d. 7004-5-6 Caps PX26d. 7004-5-6
Culots à vis E11. 7004-6-1 Screw caps E11. 7004-6-1
Culots à vis EY10 . 7004-7-1 Screw caps EY10. 7004-7-1
Culots à baïonnette BAX9s. 7004-8-1 Bayonet caps BAX9s. 7004-8-1
Culots à baïonnette BAY9s. 7004-9-1 Bayonet caps BAY9s. 7004-9-1
Culots B22d. 7004-10-7 Caps B22d . 7004-10-7
Culot à baïonnette B22d-3(90°/135°)/25x26. 7004-10A-2 Bayonet cap B22d-3(90°/135°)/25x26. 7004-10A-2
Culots B15d. 7004-11-6 Caps B15d . 7004-11-6
Culots à baïonnette BA15. 7004-11A-9 Bayonet caps BA15. 7004-11A-9
Culots à baïonnette BAY15d. 7004-11B-7 Bayonet caps BAY15d. 7004-11B-7
Culots BAZ15. 7004-11C-3 Caps BAZ15 . 7004-11C-3
Culots à baïonnette BA15s-3. 7004-11D-1 Bayonet caps BA15s-3. 7004-11D-1
Culots BAW15 . 7004-11E-1 Caps BAW15. 7004-11E-1
Culots à baïonnette BA20. 7004-12-7 Bayonet caps BA20. 7004-12-7
Culots à baïonnette pour automobiles Bayonet automobile caps
BA21-3(120°). 7004-13-4 BA21-3(120°). 7004-13-4
Culot à baïonnette BA9. 7004-14-9 Bayonet caps BA9. 7004-14-9
Culot à baïonnette BA7. 7004-15-2 Bayonet cap BA7. 7004-15-2
Culot à baïonnette BY22d. 7004-17-3 Bayonet cap BY22d. 7004-17-3
Culots à baïonnette BAX15d. 7004-18-1 Bayonet caps BAX15d. 7004-18-1
Culots BAU15 . 7004-19-2 Caps BAU15. 7004-19-2
Connecteur des lampes terminées G16d . 7004-20-2 Termination on finished lamps G16d. 7004-20-2
Culots à vis E27. 7004-21-9 Screw caps E27. 7004-21-9
Culots à vis E26. 7004-21A-2 Screw caps E26. 7004-21A-2
Culots à vis E10. 7004-22-6 Screw caps E10. 7004-22-6
Culots à vis E14. 7004-23-6 Screw caps E14. 7004-23-6
Culots à vis E40. 7004-24-6 Screw caps E40. 7004-24-6
Culots à vis E39. 7004-24A-1 Screw caps E39. 7004-24A-1
Culot à vis E5 . 7004-25-3 Screw cap E5 . 7004-25-3
Culot à vis E17 . 7004-26-2 Screw cap E17 . 7004-26-2
Culot à vis E27/51x39. 7004-27-3 Screw cap E27/51x39 . 7004-27-3
Culot à vis E12 . 7004-28-2 Screw cap E12 . 7004-28-2
Culot à vis à double contact E26d. 7004-29-2 Double contact screw cap E26d. 7004-29-2
Culots à vis préfocus EP10 . 7004-30-2 Prefocus screw caps EP10 . 7004-30-2
Culots préfocus P20d, PX20d, PY20d & PZ20d. 7004-31-2 Prefocus caps P20d, PX20d, PY20d & PZ20d. 7004-31-2
Culots préfocus P22d & PX22d. 7004-32-2 Prefocus caps P22d & PX22d. 7004-32-2
Culots 2G13. 7004-33-4 Caps 2G13 . 7004-33-4
Culots préfocus - Assemblage de la collerette Prefocus caps - Assembly of ring and cap
et du culot sur lampes terminées PX43t. 7004-34-2 on finished lamps PX43t. 7004-34-2
Culot préfocus PX13.5s. 7004-35-2 Prefocus cap PX13.5s . 7004-35-2
Culot préfocus P26s sur la lampe terminée. 7004-36-1 Prefocus cap P26s on finished lamp. 7004-36-1
Culots préfocus - Assemblage de la collerette Prefocus caps - Assembly of ring and
et du culot sur lampes terminées PKX22s. 7004-37-2 cap on finished lamps PKX22s. 7004-37-2
Culots préfocus - Assemblage de la collerette Prefocus caps - Assembly of collar and cap
et du culot sur lampes terminées P18s . 7004-38-3 on finished lamps
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.