iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 50174-1:2009/A1:2011

(Amendment)

Information technology - Cabling installation - Part 1: Installation specification and quality assurance

Information technology - Cabling installation - Part 1: Installation specification and quality assurance

This European Standard specifies requirements for the following aspects of information technology cabling:
a) installation specification, quality assurance documentation and procedures;
b) documentation and administration; c) operation and maintenance. This European Standard is applicable to all types of information technology cabling including generic cabling systems designed in accordance with the EN 50173 series.
Safety (electrical safety and protection, optical power, fire, etc.) and electromagnetic compatibility (EMC) requirements are outside the scope of this European Standard and are covered by other standards and regulations. However, information given in this European Standard may be of assistance in meeting these standards and regulations.

Informationstechnik - Installation von Kommunikationsverkabelung - Teil 1: Installationsspezifikation und Qualitätssicherung

Technologies de l'information - Installation de câblages - Partie 1: Spécification de l'installation et assurance de la qualité

Informacijska tehnologija - Polaganje kablov - 1. del: Specifikacija in zagotavljanje kakovosti - Dodatek A1

Ta evropski standard določa zahteve za naslednje vidike kablov za informacijsko tehnologijo:
a) specifikacijo polaganja, dokumentacijo in postopke za zagotavljanje kakovosti;
b) dokumentacije in administracijo; c) delovanje in vzdrževanje. Ta evropski standard velja za vse vrste kablov za informacijsko tehnologijo, vključno z rodovnimi kabelskimi sistemi, narejenimi v skladu s serijo EN 50173.
Varnostne zahteve (električna varnost in zaščita, optična moč, ogenj itd.) in zahteve elektromagnetne združljivosti (EMC) so zunaj področja tega evropskega standarda in so zajete z drugimi standardi in predpisi. Vendar so lahko informacije, podane v tem evropskem standardu, opora pri izpolnjevanju teh standardov in predpisov.

General Information

Status
Withdrawn
Publication Date
03-Mar-2011
Withdrawal Date
31-Dec-2013
ICS
35.110 - Networking
Technical Committee
CLC/TC 215 - Electrotechnical aspects of telecommunication equipment
Drafting Committee
ISO/IEC/JTC 1/SC25 - ISO/IEC_JTC_1/SC25
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
21-May-2021
Completion Date
21-May-2021
Ref Project
SIST EN 50174-1:2009/A1:2011 - Information technology - Cabling installation -- Part 1: Installation specification and quality assurance

Relations

Replaced By
EN 50174-1:2018 - Information technology - Cabling installation - Part 1: Installation specification and quality assurance
Effective Date
07-Jun-2022
Amends
EN 50174-1:2009 - Information technology - Cabling installation - Part 1: Installation specification and quality assurance
Effective Date
28-Jan-2023

Buy Standard

EN 50174-1:2009/A1:2011EN 50174-1:2009/A1:2011
PreviousNext
Amendment
EN 50174-1:2009/A1:2011
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50174-1:2009/A1:2011
01-maj-2011
Informacijska tehnologija - Polaganje kablov - 1. del: Specifikacija in zagotavljanje
kakovosti - Dodatek A1
Information technology - Cabling installation -- Part 1: Installation specification and
quality assurance
Informationstechnik - Installation von Kommunikationsverkabelung - Teil 1:
Installationsspezifikation und Qualitätssicherung
Technologies de l'information - Installation de câblages -- Partie 1: Spécification de
l'installation et assurance de la qualité
Ta slovenski standard je istoveten z: EN 50174-1:2009/A1:2011
ICS:
33.040.50 Vodi, zveze in tokokrogi Lines, connections and
circuits
35.110 Omreževanje Networking
SIST EN 50174-1:2009/A1:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50174-1:2009/A1:2011

---------------------- Page: 2 ----------------------

SIST EN 50174-1:2009/A1:2011

EUROPEAN STANDARD
EN 50174-1/A1

NORME EUROPÉENNE
March 2011
EUROPÄISCHE NORM

ICS 35.110


English version


Information technology -
Cabling installation -
Part 1: Installation specification and quality assurance



Technologies de l'information -  Informationstechnik -
Installation de câblages - Installation von
Partie 1: Spécification de l'installation et Kommunikationsverkabelung -
assurance de la qualité Teil 1: Installationsspezifikation und
Qualitätssicherung





This amendment A1 modifies the European Standard EN 50174-1:2009; it was approved by CENELEC on
2011-01-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50174-1:2009/A1:2011 E

---------------------- Page: 3 ----------------------

SIST EN 50174-1:2009/A1:2011
EN 50174-1:2009/A1:2011 – 2 –
Foreword
This amendment to the European Standard EN 50174-1:2009 was prepared by the Technical Committee
CENELEC TC 215, Electrotechnical aspects of telecommunication equipment.
The text of the draft was submitted to the formal vote and was approved by CENELEC as
Amendment A1 to EN 50174-1:2009 on 2011-01-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights.
The following dates were fixed:
– latest date by which the amendment has to be implemented

at national level by publication of an identical

national standard or by endorsement
(dop) 2012-01-01

– latest date by which the national standards conflicting

with the amendment have to be withdrawn
(dow) 2014-01-01
This amendment comes with
– a new normative Annex E on sampling plans and marginal results;
– simplified administration requirements (see 4.5.2), simplified complexity installation and operational
levels (see 6.2) and simplified minimum requirements for technical specifications and quality plans (see
Annex A);
– some technical and editorial changes to Clauses 4 and 5.

---------------------- Page: 4 ----------------------

SIST EN 50174-1:2009/A1:2011
– 3 – EN 50174-1:2009/A1:2011
Text of A1 to EN 50174-1:2009
Introduction
Replace Table 1 with:
Table 1 – Contextual relationship between EN 50174 series and other standards
relevant for information technology cabling systems
Building design phase Generic cabling Specification phase Installation phase Operation phase
design phase
EN 50310 EN 50173 series EN 50174-1 EN 50174-1
except
EN 50173-4
6. Bonding networks 4: Structure 4: Requirements for 4: Requirements for
s
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 50700:2023(Main)
Information technology - Premises distribution access network (PDAN) cabling to support deployment of optical broadband networks
SIST EN 50700:2023

This document specifies the optical fibre access network cabling within single- and multi-subscriber premises termed the premises distribution access network (PDAN). The premises can comprise single or multiple buildings. The cabling specified is intended to be pre-installed, in readiness for subsequent connection of the multi-subscriber premises to an access providers infrastructure to support deployment of optical broadband networks. This document does not specify either the access network cabling external to the premises or the cabling within the subscriber space for onward distribution of services beyond the customer premises equipment. This document specifies: a) the structure and configuration of the optical fibre cabling; b) cabling performance requirements; c) implementation options. Annex A contains information on network segments not covered by this document. Safety practices in relation to optical power hazard are specified in EN 60825-2. Optical powers higher than the hazard levels specified in EN 60825-2 are not considered in this document. Safety (electrical safety, fire, etc.) and electromagnetic compatibility (EMC) requirements are outside the scope of this document and are covered by other standards and regulations. However, information given in this document can be of assistance in meeting these standards and regulations.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CLC/TS 50600-5-1:2023(Main)
Information technology - Data centre facilities and infrastructures - Part 5-1: Maturity Model for Energy Management and Environmental Sustainability
SIST-TS CLC/TS 50600-5-1:2023

This document provides a maturity model addressing the environmental impact (energy management and environmental sustainability) of the facilities, infrastructures and the information and communication technology (ICT) equipment accommodated by the data centre.

  • Technical specification
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50600-2-4:2023(Main)
Information technology - Data centre facilities and infrastructures - Part 2-4: Telecommunications cabling infrastructure
SIST EN 50600-2-4:2023

This document specifies design principles for information technology and network telecommunications cabling (e.g. SAN and LAN) in accordance with EN 50173 5, based upon the criteria and classifications for “availability” and “physical security” within EN 50600 1. This document addresses the telecommunications cabling infrastructures used in data centres. It describes: a) for design, the application of generic cabling standards in the EN 50173 series; b) for installation specification, planning and practices and quality assurance, the application of standards in the EN 50174 series (and related standards). In addition, this document specifies requirements and recommendations for the following: 1) general information technology cabling to support the IT operation of the data centre; 2) telecommunications cabling to monitor and control, as appropriate, power distribution, environmental control and physical security of the data centre; 3) other building automation cabling; 4) pathways, pathway systems, spaces and enclosures for the telecommunications cabling infrastructures. Safety and electromagnetic compatibility (EMC) requirements are outside the scope of this document and are covered by other standards and regulations. However, information given in this document can be of assistance in meeting these standards and regulations.

  • Standard
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50600-4-8:2022(Main)
Information technology - Data centre facilities and infrastructures - Part 4-8: Carbon usage effectiveness
SIST EN 50600-4-8:2023

This document specifies the Carbon Usage Effectiveness as a KPI to quantify the CO2 emissions of a data centre during the use phase of the data centre life cycle. This document a) defines the Carbon Usage Effectiveness (CUE) of a data centre, b) introduces CUE measurement categories, c) describes the relationship of this KPI to a data centre’s infrastructure, information technology equipment and information technology operations, d) defines the measurement, the calculation and the reporting of the parameter, e) provides information on the correct interpretation of the CUE.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50600-4-9:2022(Main)
Information technology - Data centre facilities and infrastructures - Part 4-9: Water Usage Effectiveness
SIST EN 50600-4-9:2023

This document specifies the Water Usage Effectiveness (WUE) as a KPI for quantifying the water consumption of a data centre during use phase of the data centre life cycle. This document: a) defines the Water Usage Effectiveness (WUE) of a data centre; b) introduces WUE measurement categories; c) describes the relationship of this KPI to a data centre’s infrastructure, information technology equipment and information technology operations; d) defines the measurement, the calculation and the reporting of the parameter; e) provides information on the correct interpretation of the WUE.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50697:2022(Main)
Information technology - Measurement of end-to-end links, modular plug terminated links and direct attach cabling
SIST EN 50697:2023

This document specifies the measurement of two- and four-pair balanced cabling of the following cabling configurations specified in EN 50173 20: a) end-to-end (E2E) link Class D, E and EA; b) modular plug terminated links (MPTLs) of Class D, E, EA, F, FA and of Class I and II; c) direct attach cabling of Class D, E, EA, F, FA and of Class I and II. The free connectors which terminate two and four pairs in field and laboratory conditions are included. This document specifies laboratory and field measurement procedures. The requirements for accuracy to measure cabling parameters identified in EN 50173 20 are provided in IEC 61935 1 and EN 61935 2.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50173-20:2022(Main)
Information technology - Generic cabling systems - Part 20: Alternative cabling configurations
SIST EN 50173-20:2023

This document specifies: a) configurations of cabling which use components meeting the requirements of EN 50173-1 but do not conform to the structure of generic cabling specified in the premises-specific documents EN 50173-2 to EN 50173-6; b) channel transmission and environmental performance requirements including those by reference to EN 50173-1. NOTE The configurations of this document do not replace the generic cabling solutions of EN 50173-2, EN 50173-3, EN 50173-4, EN 50173-5 and EN 50173-6. Test procedures to verify conformance of the balanced cabling configurations to the cabling transmission performance requirements of this document are provided in EN 50697. Safety and electromagnetic compatibility (EMC) requirements are outside the scope of this document and are covered by other standards and regulations.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50667:2016/A1:2021(Amendment)
Information technology - Automated infrastructure management (AIM) systems - Requirements, data exchange and applications
SIST EN 50667:2017/A1:2022

This Standard specifies the requirements and recommendations for the attributes of Automated Infrastructure Management (AIM) systems.

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50600-2-1:2021(Main)
Information technology - Data centre facilities and infrastructures - Part 2-1: Building construction
SIST EN 50600-2-1:2021

This document gives guidelines for the construction of buildings and other structures which provide accommodation for data centres based upon the criteria and classification for “physical security” within EN 50600 1 in support of availability. This document specifies requirements and recommendations for the following: a) location and site selection (taking in to account natural environment and adjacencies); b) protection from environmental risks; c) site configuration; d) building construction; e) building configuration; f) provision of access; g) intrusion protection; h) physical fire protection; i) protection against damage from water; j) quality construction measures. Safety and electromagnetic compatibility (EMC) requirements are outside the scope of this document and are covered by other standards and regulations. However, information given in this document can be of assistance in meeting these standards and regulations. Conformance of data centres to the present document is covered in Clause 4.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50600-2-5:2021(Main)
Information technology - Data centre facilities and infrastructures - Part 2-5: Security systems
SIST EN 50600-2-5:2021

This document addresses the physical security of data centres based upon the criteria and classifications for “availability”, “security” and “energy efficiency enablement” within EN 50600 1. This document provides designations for the data centres spaces defined in EN 50600 1. This document specifies requirements and recommendations for those data centre spaces, and the systems employed within those spaces, in relation to protection against: a) unauthorized access addressing organizational and technological solutions; b) intrusion; c) fire events igniting within data centres spaces; d) environmental events (other than fire) within the data centre spaces which would affect the defined level of protection; e) environmental events outside the data centre spaces which would affect the defined level of protection. NOTE Constructional requirements and recommendations are provided by reference to EN 50600 2 1. Safety and electromagnetic compatibility (EMC) requirements are outside the scope of this document and are covered by other standards and regulations. However, the information given in this document can be of assistance in meeting these standards and regulations.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day