EN 62148-11:2009

Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin active device modules

IEC 62148-11:2009 covers physical interface specification for modulator integrated laser diode transmitters. The object of this standard is to adequately specify the physical requirements of an optical transmitter that will enable mechanical interchangeability of transmitters complying with this standard both at the printed circuit board and for any panel mounting requirement. This second edition cancels and replaces the first edition. The first edition was limited to 14-pin modulator-integrated laser diode transmitters. The second edition has been expanded to include 14-pin pump lasers and the title changed to reflect the new scope. This publication is to be read in conjunction with IEC 62148-1:2002.

Aktive Lichtwellenleiterbauelemente und -geräte - Gehäuse- und Schnittstellennormen - Teil 11: Aktive Geräte mit 14 Anschlüssen

Composants et dispositifs actifs en fibres optiques - Normes de boîtier et d'interface - Partie 11: Modules de dispositifs actifs de 14 broches

La CEI 62148-11:2009 couvre les spécifications de l'interface physique des émetteurs à diode laser à modulateur intégré. Le but de la présente norme est de spécifier de façon adéquate les exigences physiques applicables aux émetteurs optiques de façon à permettre l'interchangeabilité mécanique des émetteurs conformes à cette norme à la fois sur les cartes à circuits imprimées et pour toutes les exigences concernant le montage des panneaux. Cette deuxième édition annule et remplace la première édition. La première édition ne concernait que les émetteurs à diode laser de 14 broches à modulateur intégré. Cette deuxième édition a été étendue afin d'inclure les lasers pompés de 14 broches, et le titre adapté afin de refléter le nouveau domaine d'application. Cette publication doit être lue conjointement avec la CEI 62148-1:2002.

Aktivne komponente in naprave optičnih vlaken - Standardi oblike in vmesnika - 11. del: Laserski diodni oddajniki z integriranim modulatorjem s 14 kontakti (IEC 62148-11:2009)

Ta del IEC 62148 zajema specifikacije za fizične vmesnike za laserske diodne oddajnike z integriranim modulatorjem. Predmet tega standarda je primerno opredeliti fizične zahteve za optični oddajnik, ki omogočajo mehansko zamenljivost oddajnikov v skladu s tem standardom na plošči tiskanega vezja in za druge zahteve nameščanja plošč.

General Information

• Status: Published
• Publication Date: 10-Dec-2009
• Withdrawal Date: 30-Sep-2012
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/SR 86C - Fibre optic systems and active devices
• Drafting Committee: IEC/SC 86C - IEC_SC_86C
• Parallel Committee: IEC/SC 86C - IEC_SC_86C
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 11-Dec-2009
• Completion Date: 11-Dec-2009
• Ref Project: SIST EN 62148-11:2010 - Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin active device modules (IEC 62148-11:2009)

Relations

• Replaces: EN 62148-11:2003 - Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin modulator-integrated laser diode transmitters
• Effective Date: 29-Jan-2023
• Revised: prEN IEC 62148-11:2024 - Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin modulator integrated laser diode modules and pump laser diode modules
• Effective Date: 06-Feb-2024

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2010
1DGRPHãþD
SIST EN 62148-11:2004
$NWLYQHNRPSRQHQWHLQQDSUDYHRSWLþQLKYODNHQ6WDQGDUGLREOLNHLQYPHVQLND
GHO/DVHUVNLGLRGQLRGGDMQLNL]LQWHJULUDQLPPRGXODWRUMHPVNRQWDNWL,(&

Fibre optic active components and devices - Package and interface standards - Part 11:
14-pin active device modules (IEC 62148-11:2009)
Aktive Lichtwellenleiterbauelemente und -geräte - Gehäuse- und Schnittstellennormen -
Teil 11: Aktive Geräte mit 14 Anschlüssen (IEC 62148-11:2009)
Composants et dispositifs actifs en fibres optiques - Normes de boîtier et d'interface -
Partie 11: Modules de dispositifs actifs de 14 broches (CEI 62148-11:2009)
Ta slovenski standard je istoveten z: EN 62148-11:2009
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 62148-11
NORME EUROPÉENNE
December 2009
EUROPÄISCHE NORM
ICS 33.180.20 Supersedes EN 62148-11:2003

English version
Fibre optic active components and devices -
Package and interface standards -
Part 11: 14-pin active device modules
(IEC 62148-11:2009)
Composants et dispositifs actifs  Aktive Lichtwellenleiterbauelemente
en fibres optiques - und -geräte -
Normes de boîtier et d'interface - Gehäuse- und Schnittstellennormen -
Partie 11: Modules de dispositifs actifs Teil 11: Aktive Geräte mit 14 Anschlüssen
de 14 broches (IEC 62148-11:2009)
(CEI 62148-11:2009)
This European Standard was approved by CENELEC on 2009-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels

© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62148-11:2009 E
Foreword
The text of document 86C/882/FDIS, future edition 2 of IEC 62148-11, prepared by SC 86C, Fibre optic
systems and active devices, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 62148-11 on 2009-10-01.
This European Standard supersedes EN 62148-11:2003
EN 62148-11:2003 was limited to 14-pin modulator-integrated laser diode transmitters.
new scope.
This standard is to be used in conjunction with EN 62148-1.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-10-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62148-11:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60793 NOTE  Harmonized in EN 60793 series (not modified).
__________
- 3 - EN 62148-11:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

1) 2)
IEC 60793-2-50 - Optical fibres - EN 60793-2-50 2008
Part 2-50: Product specifications - Sectional
specification for class B single-mode fibres

IEC 60874 Series Connectors for optical fibres and cables EN 60874 Series

1) 2)
IEC 62148-1 - Fibre optic active components and devices - EN 62148-1 2002
Package and interface standards -
Part 1: General and guidance
1)
Undated reference.
2)
Valid edition at date of issue.

IEC 62148-11 ®
Edition 2.0 2009-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic active components and devices – Package and interface standards –
Part 11: 14-pin active device modules

Composants et dispositifs actifs en fibres optiques – Normes de boîtier et
d'interface –
Partie 11: Modules de dispositifs actifs de 14 broches

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
M
CODE PRIX
ICS 33.180.20 ISBN 2-8318-1050-6
– 2 – 62148-11 © IEC:2009
CONTENTS
FOREWORD.3
INTRODUCTION.5
1 Scope and object.6
2 Normative references .6
3 Abbreviations .6
4 Classification.6
5 Specification of fibre optic transmitter module .6
5.1 Pigtail interface .6
5.2 Electrical interface.7
5.2.1 General .7
5.2.2 Numbering of electrical terminals.7
5.2.3 Pin function definition .7
6 Outline and footprint of fibre optic transmitter module.9
6.1 Drawing of case outline .9
6.2 Drawing of case outline .10
6.3 Drawings of footprint .11
Bibliography.12

Figure 1 – Electrical terminal numbering assignments (viewed from the top of the
module) .7
Figure 2 – Case outline for 14-pin modulator integrated laser transmitters .9
Figure 3 – Case outline for 14-pin pump lasers .10
Figure 4 – Footprint .11

Table 1 – Pin-function definitions for modulator integrated laser diode device.7
Table 2 – Pin-function definitions for pump laser diode device .8

62148-11 © IEC:2009 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES –
PACKAGE AND INTERFACE STANDARDS –

Part 11: 14-pin active device modules

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. Internat
...