EN IEC 62714-4:2020/AC:2020-12

Engineering data exchange format for use in industrial automation systems engineering - Automation markup language - Part 4: Logic

TAN - // IEC Corrigendum

Datenaustauschformat für Planungsdaten industrieller Automatisierungssysteme - Automation Markup Language (AML) - Teil 4: Logik

Format d'échange de données pour une utilisation dans l'ingénierie des systèmes d'automatisation industrielle - Automation markup language - Partie 4: Logique

Oblika izmenjave tehničnih podatkov za uporabo v industrijskem inženiringu avtomatizacije sistemov - Označevalni jezik za avtomatizacijo - 4. del: Logika (IEC 62714-4:2020/COR1:2020)

General Information

• Status: Published
• Publication Date: 03-Dec-2020
• ICS: 25.040.40 - Industrial process measurement and control
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 04-Dec-2020
• Completion Date: 04-Dec-2020
• Ref Project: SIST EN IEC 62714-4:2020/AC:2021 - Engineering data exchange format for use in industrial automation systems engineering - Automation markup language - Part 4: Logic (IEC 62714-4:2020/COR1:2020)

Relations

• Corrects: EN IEC 62714-4:2020 - Engineering data exchange format for use in industrial automation systems engineering - Automation markup language - Part 4: Logic
• Effective Date: 24-Nov-2020

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62714-4:2020/AC:2021
01-februar-2021
Oblika izmenjave tehničnih podatkov za uporabo v industrijskem inženiringu
avtomatizacije sistemov - Označevalni jezik za avtomatizacijo - 4. del: Logika (IEC
62714-4:2020/COR1:2020)
Engineering data exchange format for use in industrial automation systems engineering -
Automation markup language - Part 4: Logic (IEC 62714-4:2020/COR1:2020)
Datenaustauschformat für Planungsdaten industrieller Automatisierungssysteme -
Automation Markup Language (AML) - Teil 4: Logik (IEC 62714-4:2020/COR1:2020)
Format d'échange de données pour une utilisation dans l'ingénierie des systèmes
d'automatisation industrielle - Automation markup language - Partie 4: Logique (IEC
62714-4:2020/COR1:2020)
Ta slovenski standard je istoveten z: EN IEC 62714-4:2020/AC:2020-12
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.060 Jeziki, ki se uporabljajo v Languages used in
informacijski tehniki in information technology
tehnologiji
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN IEC 62714-4:2020/AC:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62714-4:2020/AC:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 62714-4:2020/AC:2021

EUROPEAN STANDARD EN IEC 62714-
4:2020/AC:2020-12
NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2020

ICS 25.040.40
English Version
Engineering data exchange format for use in industrial
automation systems engineering - Automation markup language
- Part 4: Logic
(IEC 62714-4:2020/COR1:2020)
Format d'échange de données pour une utilisation dans Datenaustauschformat für Planungsdaten industrieller
l'ingénierie des systèmes d'automatisation industrielle - Automatisierungssysteme - Automation Markup Language
Automation markup language - Partie 4: Logique (AML) - Teil 4: Logik
(IEC 62714-4:2020/COR1:2020) (IEC 62714-4:2020/COR1:2020)
This corrigendum becomes effective on 4 December 2020 for incorporation in the English language version of the EN.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62714-4:2020/AC:2020-12 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62714-4:2020/AC:2021
EN IEC 62714-4:2020/AC:2020-12



Endorsement notice

The text of the corrigendum IEC 62714-4:2020/COR1:2020 was approved by CENELEC as EN IEC 62714-4:2020/AC:2020-12 without any
modification.

---------------------- Page: 4 ----------------------
SIST EN IEC 62714-4:2020/AC:2021
IEC 62714-4:2020/COR1:2020 – 1 –
 IEC 2020
INTERNATIONAL ELECTROTECHNICAL COMMISSION
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________

IEC 62714-4 IEC 62714-4
Edition 2.0  2020-06 Édition 2.0  2020-06


ENGINEERING DATA EXCHANGE FORMAT FOR FORMAT D'ÉCHANGE DE DONNÉES POUR UNE
USE IN INDUSTRIAL AUTOMATION SYSTEMS UTILISATION DANS L'INGÉNIERIE DES
ENGINEERING – AUTOMATION MARKUP SYSTÈMES D'AUTOMATISATION INDUSTRIELLE
LANGUAGE – – AUTOMATION MARKUP LANGUAGE –


Part 4: Logic Partie 4: Logique



CO RRI G E NDUM 1



Corrections to the French version appear after the English text.
Les corrections à la version française sont données après le texte anglais.

INTRODUCTION
Replace the existing reference to “Subclause 10.4.2” by “Clause 11”.

4 Conformity
Replace the existing reference to “10.4.2” by “Clause 11”.

5.4 Referencing logic information
Replace the existing reference to “Subclause 10.4.2” by “Clause 11”.

7.1.1 Use of IEC 61131-10 schema
Replace the existing word “SCF” by “SFC”.

IEC 62714-4:2020-06/COR12020-11(en-fr)

---------------------- Page: 5 ----------------------
SIST EN IEC 62714-4:2020/AC:2021
– 2 – IEC 62714-4:2020/COR1:2020
 IEC 2020
8.3.1 Common rules
Replace the existing reference to “6.3.2” by “8.3.2”.
Replace the existing reference to “6.3.3” by “8.3.3”.
Replace the existing reference to “6.3.4” by “8.3.4”.
Replace the existing references to “6.3.5” by “8.3.5”.
Replace the existing references to “6.3.6” by “8.3.6”.

8.4.1 Common rules
Replace the existing reference to “6.4.2” by “8.4.2”.
Replace the existing reference to “6.4.3” by “8.4.3”.
Replace the existing reference to “6.4.4” by “8.4.4”.
Replace the existing reference to “6.4.5” by “8.4.5”.

Table 24 – RoleClass LogicModelObject
Replace the existing reference to “10.4.2” by “Clause 11”.

Table 25 – InterfaceClass LogicModelInterface
Replace the existing reference to “10.4.2” by “Clause 11”.

Table 26 –
...