EN 60384-22:2004

Fixed capacitors for use in electronic equipment - Part 22: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2

applies to fixed unencapsulated surface mount multilayer capacitors of ceramic dielectric, Class 2, for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted on printed boards, or directly onto substrates for hybrid circuits.

Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 22: Rahmenspezifikation: Oberflächenmontierbare Vielschichtkeramik-Festkondensatoren, Klasse 2

Condensateurs fixes utilisés dans les équipements électroniques - Partie 22: Spécification intermédiaire: Condensateurs multicouches fixes pour montage en surface pour diélectriques en céramique, classe 2

applies to fixed unencapsulated surface mount multilayer capacitors of ceramic dielectric, Class 2, for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted on printed boards, or directly onto substrates for hybrid circuits.

Pritrjeni kondenzatorji za uporabo v elektronski opremi – 22. del: Področna specifikacija: pritrjeni večplastni kondenzatorji za površinsko namestitev s keramičnim dielektrikom, razred 2 (IEC 60384-22:2004 + popravek 2004)

General Information

• Status: Withdrawn
• Publication Date: 08-Nov-2004
• Withdrawal Date: 31-Aug-2007
• ICS: 31.060.10 - Fixed capacitors
• Technical Committee: CLC/TC 40XA - CLC/TC 40XA
• Drafting Committee: IEC/TC 40 - IEC_TC_40
• Parallel Committee: IEC/TC 40 - IEC_TC_40
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 13-Jan-2015
• Completion Date: 13-Jan-2015
• Ref Project: SIST EN 60384-22:2005 - Fixed capacitors for use in electronic equipment -- Part 22: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2

Relations

• Replaces: EN 132100:1996 - Sectional Specification: Fixed multilayer ceramic surface mounting capacitors - Assessment levels EZ and DZ
• Effective Date: 28-Jan-2023
• Replaced By: EN 60384-22:2012 - Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 60384-22:2005

STANDARD
december 2005
Pritrjeni kondenzatorji za uporabo v elektronski opremi – 22. del: Področna
specifikacija: pritrjeni večplastni kondenzatorji za površinsko namestitev s
keramičnim dielektrikom, razred 2 (IEC 60384-22:2004 + popravek 2004)
Fixed capacitors for use in electronic equipment – Part 22: Sectional specification:
Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 (IEC 60384-
22:2004 + corrigendum 2004)
ICS 31.060.10 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD EN 60384-22
NORME EUROPÉENNE
EUROPÄISCHE NORM November 2004

ICS 31.060.10 Partially supersedes EN 132100:1996

English version
Fixed capacitors for use in electronic equipment
Part 22: Sectional specification: Fixed surface mount multilayer
capacitors of ceramic dielectric, Class 2
(IEC 60384-22:2004 + corrigendum Sep. 2004)

Condensateurs fixes utilisés dans les Festkondensatoren zur Verwendung in
équipements électroniques Geräten der Elektronik
Partie 22: Spécification intermédiaire: Teil 22: Rahmenspezifikation:
Condensateurs multicouches fixes pour Oberflächenmontierbare
montage en surface pour diélectriques en Vielschichtkeramik-Festkondensatoren,
céramique, classe 2 Klasse 2
(CEI 60384-22:2004 + corrigendum Sep. (IEC 60384-22:2004 + corrigendum Sep.
2004) 2004)
This European Standard was approved by CENELEC on 2004-09-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60384-22:2004 E
Foreword
The text of document 40/1420/FDIS, future edition 1 of IEC 60384-22, prepared by IEC TC 40,
Capacitors and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 60384-22 on 2004-09-01.
This European Standard, together with EN 60384-21:2004, supersedes EN 132100:1996.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-09-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60384-22:2004 + corrigendum September 2004 was
approved by CENELEC as a European Standard without any modification.
__________
- 3 - EN 60384-22:2004
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60063 1963 Preferred number series for resistors and - -
capacitors
A1 1967 - -
A2 1977 - -
1)
IEC 60068-1 1988 Environmental testing EN 60068-1 1994
Part 1: General and guidance
2)
IEC 60068-2-58 1999 Part 2-58: Tests - Test Td: Test methods EN 60068-2-58 1999
for solderability, resistance to dissolution
of metallization and to soldering heat of
surface mounting devices (SMD)

IEC 60384-1 1999 Fixed capacitors for use in electronic EN 60384-1 2001
(mod) equipment + corr. October 2001
Part 1: Generic specification
IEC 60410 1973 Sampling plans and procedures for - -
inspection by attributes
IEC QC 001005 2000 Register of firms, products and services - -
approved under the IECQ system,
including ISO 9000
ISO 3 1973 Preferred numbers - Series of preferred - -
numbers
1)
EN 60068-1 includes corrigendum October 1988 + A1:1992 to IEC 60068-1.
2)
EN 60068-2-58:1999 is superseded by EN 60068-2-58:2004, which is based on IEC 60068-2-58:2004.

INTERNATIONAL
IEC
STANDARD 60384-22
First edition
2004-06
Fixed capacitors for use in electronic equipment –
Part 22:
Sectional specification:
Fixed surface mount multilayer capacitors
of ceramic dielectric, Class 2
© IEC 2004 ⎯ Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale W
International Electrotechnical Commission
ɆɟɠɞɭɧɚɪɨɞɧɚɹɗɥɟɤɬɪɨɬɟɯɧɢɱɟɫɤɚɹɄɨɦɢɫɫɢɹ
For price, see current catalogue

– 2 – 60384-22 © IEC:2004(E)
CONTENTS
FOREWORD.4
1 General.6
1.1 Scope.6
1.2 Object.6
1.3 Normative references.6
1.4 Information to be given in a detail specification .7
1.5 Terminology.8
1.6 Marking.9
2 Preferred rating and characteristics .9
2.1 Preferred characteristics.9
2.2 Preferred values of ratings .10
3 Quality assessment procedures.11
3.1 Primary stage of manufacture.11
3.2 Structurally similar components.11
3.3 Certified records of released lots.11
3.4 Qualification Approval.12
3.5 Quality Conformance Inspection.18
4 Test and measurement procedures.20
4.1 Special preconditioning .20
4.2 Measuring conditions.20
4.3 Mounting.20
4.4 Visual examination and check of dimensions.20
4.5 Electrical tests.22
4.6 Temperature characteristic of capacitance .25
4.7 Shear test.26
4.8 Substrate bending test.26
4.9 Resistance to soldering heat .27
4.10 Solderability.28
4.11 Rapid change of temperature .29
4.12 Climatic sequence.30
4.13 Damp heat, steady state.31
4.14 Endurance.32
4.15 Robustness of terminations (only for capacitors with strip termination) .33
4.16 Component solvent resistance (if required).33
4.17 Solvent resistance of the marking (if required).33
4.18 Accelerated damp heat, steady state (if required).34
Annex A (normative) Guide for the specification and coding of dimensions of fixed
surface mount multilayer capacitors of ceramic dielectric, Class 2 .36
Annex B (informative) Capacitance ageing of fixed capacitors of ceramic dielectric,
Class 2 .37

60384-22 © IEC:2004(E) – 3 –
Figure 1 – Fault: crack or fissure .21
Figure 2 – Fault: crack or fissure .21
Figure 3 – Separation or delamination .21
Figure 4 – Exposed electrodes.21
Figure 5 – Principal faces .22
Table 1 – Preferred values of category voltages .10
Table 2 – Preferred tolerances.10
Table 3 – Temperature characteristic of capacitance .11
Table 4 – Fixed sample size test plan for qualification approval, assessment level EZ .14
Table 5 – Tests schedule for qualification approval.15
Table 6a – Lot-by-lot inspection .19
Table 6b – Periodic test .19
Table 7 – Measuring conditions .22
Table 8 – Tangent of loss angle limits.23
Table 9 – Test voltages.24
Table 10 – Details of measuring conditions.26
Table 11 – Maximum capacitance change.28
Table 12 – Maximum capacitance change.29
Table 13 – Number of damp heat cycles .30
Table 14 – Final inspection, measurements and requirements .31
Table 15 – Final inspection, measurements and requirements .32
Table 16 – Endurance test conditions (U = U ) .32
C R
Table 17 – Endurance test conditions (U ≠ U ) .32
C R
Table 18 – Final inspection, measurements and requirements of endurance test .33
Table 19 – Initial requirements.34
Table 20 – Conditioning .34
Table A.1 – Dimensions .36

– 4 – 60384-22 © IEC:2004(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIXED CAPACITORS FOR US
...