EN 61675-3:1998

Radionuclide imaging devices - Characteristics and test conditions - Part 3: Gamma camera based wholebody imaging systems

Specifies test methods for describing the characteristics of gamma camera based wholebody imaging systems. As these systems are based on Anger type gamma cameras this part of EN 61675 should be read in conjunction with EN 60789. The test methods specified have been selected to reflect as much as possible the clinical use of gamma camera based wholebody imaging systems. It is intended that the test methods be carried out by manufacturers, thereby enabling them to describe the characteristics of gamma camera based wholebody imaging systems.

Bildgebende Systeme in der Nuklearmedizin - Merkmale und Prüfbedingungen - Teil 3: Systeme mit Ganzkörperzusatz basierend auf einer Gammakamera

Dispositifs d'imagerie par radionucléides - Caractéristiques et conditions d'essais - Partie 3: Systèmes d'imagerie du corps entier à gamma-caméra

La CEI 61675-3:1998 a pour objet de spécifier les méthodes d'essai relatives à la description des caractéristiques des systèmes d'imagerie du corps entier à gamma caméra. Dans la mesure où ces systèmes sont basés sur des gamma caméras de type Anger, il convient de lire la présente partie de la CEI 61675 conjointement avec la CEI 60789. Les méthodes d'essai spécifiées ont été sélectionnées afin de refléter autant que possible l'utilisation clinique des systèmes d'imagerie du corps entier à gamma caméra. L'objectif est de faire appliquer ces méthodes d'essai par les fabricants, leur donnant ainsi les moyens de décrire les caractéristiques des systèmes d'imagerie du corps entier à gamma caméra.

Radionuclide imaging devices - Characteristics and test conditions - Part 3: Gamma camera based wholebody imaging systems (IEC 61675-3:1998)

General Information

• Status: Withdrawn
• Publication Date: 21-Apr-1998
• Withdrawal Date: 31-Dec-2000
• ICS: 11.040.50 - Radiographic equipment
• Technical Committee: CLC/TC 62 - Electrical equipment in medical practice
• Drafting Committee: IEC/SC 62C - IEC_SC_62C
• Parallel Committee: IEC/SC 62C - IEC_SC_62C
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 10-Sep-2018
• Completion Date: 10-Sep-2018
• Ref Project: SIST EN 61675-3:1998 - Radionuclide imaging devices - Characteristics and test conditions -- Part 3: Gamma camera based wholebody imaging systems

Relations

• Replaced By: EN 61675-2:2015 - Radionuclide imaging devices - Characteristics and test conditions - Part 2: Gamma cameras for planar, wholebody, and SPECT imaging
• Effective Date: 10-Nov-2015

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61675-3:1998
01-september-1998
Radionuclide imaging devices - Characteristics and test conditions - Part 3:
Gamma camera based wholebody imaging systems (IEC 61675-3:1998)
Radionuclide imaging devices - Characteristics and test conditions -- Part 3: Gamma
camera based wholebody imaging systems
Bildgebende Systeme in der Nuklearmedizin - Merkmale und Prüfbedingungen -- Teil 3:
Systeme mit Ganzkörperzusatz basierend auf einer Gammakamera
Dispositifs d'imagerie par radionucléides - Caractéristiques et conditions d'essais --
Partie 3: Systèmes d'imagerie du corps entier à gamma-caméra
Ta slovenski standard je istoveten z: EN 61675-3:1998
ICS:
11.040.50 Radiografska oprema Radiographic equipment
SIST EN 61675-3:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61675-3:1998

---------------------- Page: 2 ----------------------

SIST EN 61675-3:1998

---------------------- Page: 3 ----------------------

SIST EN 61675-3:1998

---------------------- Page: 4 ----------------------

SIST EN 61675-3:1998

---------------------- Page: 5 ----------------------

SIST EN 61675-3:1998

---------------------- Page: 6 ----------------------

SIST EN 61675-3:1998
INTERNATIONAL IEC
STANDARD
61675-3
First edition
1998-02
Radionuclide imaging devices –
Characteristics and test conditions –
Part 3:
Gamma camera based wholebody
imaging systems
Dispositifs d’imagerie par radionucléides –
Caractéristiques et conditions d’essais –
Partie 3:
Systèmes d’imagerie du corps entier
à gamma-caméra
 IEC 1998 Copyright - all rights reserved  Droits de reproduction réservés
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun any form or by any means, electronic or mechanical,
procédé, électronique ou mécanique, y compris la photo- including photocopying and microfilm, without permission in
copie et les microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http: //www.iec.ch
Commission Electrotechnique Internationale
PRICE CODE
H
International Electrotechnical Commission
For price, see current catalogue

---------------------- Page: 7 ----------------------

SIST EN 61675-3:1998
– 2 – 61675-3 © IEC:1998(E)
CONTENTS
Page
FOREWORD. . 3
Clause
1 General. 4
1.1 Scope and object . 4
1.2 Normative references. 4
2 Terminology and definitions . 4
3 Test methods. 5
3.1 Scanning constancy. 5
3.2 SPATIAL RESOLUTION without scatter . 5
4 Accompanying documents. 6
Annex A (informative) – Index of defined terms . 8

---------------------- Page: 8 ----------------------

SIST EN 61675-3:1998
61675-3 © IEC:1998(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
RADIONUCLIDE IMAGING DEVICES –
CHARACTERISTICS AND TEST CONDITIONS –
Part 3: Gamma camera based wholebody imaging systems
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisi
...