EN 61029-1:2000/A12:2003
(Amendment)Safety of transportable motor-operated electric tools - Part 1: General requirements
Safety of transportable motor-operated electric tools - Part 1: General requirements
Superseded by EN 61029-1:2009
2021: CLC legacy converted by DCLab NISOSTS
Sicherheit transportabler motorbetriebener Elektrowerkzeuge - Teil 1: Allgemeine Anforderungen
Sécurité des machines-outils électriques semi-fixes - Partie 1: Règles générales
Varnost prenosnih električnih orodij - 1. del: Splošne zahteve
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 61029-
1:2000/A12:2003
STANDARD
december 2003
Varnost prenosnih električnih orodij - 1. del: Splošne zahteve
Safety of transportable motor-operated electric tools - Part 1: General
requirements; Amendment A12
ICS 25.140.20 Referenčna številka
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
EUROPEAN STANDARD EN 61029-1/A12
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2003
ICS 25.140.20
English version
Safety of transportable motor-operated electric tools
Part 1: General requirements
Sécurité des machines-outils Sicherheit transportabler motorbetriebener
électriques semi-fixes Elektrowerkzeuge
Partie 1: Règles générales Teil 1: Allgemeine Anforderungen
This amendment A12 modifies the European Standard EN 61029-1:2000; it was approved by CENELEC
on 2002-11-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this amendment the status of a national standard without any
alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61029-1:2000/A12:2003 E
Foreword
This amendment to the European Standard EN 61029-1:2000 was prepared by the Technical Committee
CENELEC TC 61F, Safety of hand-held and transportable motor-operated electric tools.
The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC
as amendment A12 to EN 61029-1:2000 on 2002-11-01.
The following dates were fixed:
- latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-12-01
- latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2005-11-01
__________
– 3 – EN 61029-1:2000/A12:2003
1 Scope
1.1 Add the following new paragraph:
This standard applies also to transportable motor operated tools intended to be connected to a water
supply.
2 Definitions
Add the following definition:
2.37
PRCD
portable residual current device
7 Marking and information for use
7.13 Add the following new paragraphs:
f) Connection to water supply
1) For tools intended to be connected to a water
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.