EN 60695-1-30:2017

Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines

IEC 60695-1-30:2008 provides guidance for assessing and choosing candidate materials, components or sub-assemblies for making an end-product based upon preselection testing. It describes how preselection provides comparative fire hazard test methods to evaluate the performance of a test specimen and how preselection can be used in the selection of materials, parts, components and sub-assemblies during the design stage of an end-product. The major changes with respect to the previous edition are as follows: - Further explanation given in the introduction and Scope - Clause 3 changes to the definitions - Clause 4 clarifications of the principles of product design considering preselection - Clause 5 clarifications of the advantages and limitations of preselection - Clause 6 clarifications of the aspects of preselection relative to hazard assessment - Annex A changes in the references for examples of test methods which may be relevant to preselection - Annex B changes in the illustrative example of the flowchart of the use of preselection tests for resistance to fire hazards of a specific product type. This publication has the status of a basic safety publication in accordance with IEC Guide 104 and ISO/IEC Guide 51.

Prüfungen zur Beurteilung der Brandgefahr - Teil 1-30: Anleitung zur Beurteilung der Brandgefahr von elektrotechnischen Erzeugnissen - Anwendung von Vorauswahlverfahren - Allgemeiner Leitfaden

Essais relatifs aux risques du feu - Partie 1-30: Lignes directrices pour l'évaluation des risques du feu des produits électrotechniques - Processus d'essais de présélection - Lignes directrices générales

La CEI 60695-1-30:2008 fournit des lignes directrices pour l'évaluation et le choix des matériaux, composants et sous-ensembles candidats en vue de l'élaboration d'un produit fini fondé sur des essais de présélection. Elle décrit la manière dont la présélection fournit des méthodes d'essai comparatives sur les risques du feu pour évaluer la performance d'une éprouvette et la façon dont la présélection peut être utilisée dans la sélection des matériaux, des parties, des composants et des sous-ensembles pendant la phase de conception d'un produit fini. Les principales modifications par rapport à l'édition antérieure sont indiquées ci-dessous: - Explications supplémentaires fournies dans l'introduction et le domaine d'application - Article 3 modifications apportées aux définitions - Article 4 éclaircissements des principes de conception des produits en prenant en compte la présélection - Article 5 éclaircissements des avantages et des limites de las présélection - Article 6 éclaircissements des aspects de la présélection par rapport à l'évaluation des risques - Annexe A modification des références, par exemple des méthodes d'essai qui pervent être applicables à la présélection - Annexe B modifications de l'exemple illustratif de l'organigramme d'utilisation des essais de présélection pour la résistance aux risques du feu d'un type de produit spécifique. Elle a le statut de publication fondamentale de sécurité, conformément au Guide CEI 104 et au Guide ISO/CEI 51.

Preskušanje požarne ogroženosti - 1-30. del: Vodilo za ocenjevanje požarne varnosti elektrotehniških izdelkov - Predizbira preskusnih procesov - Splošno vodilo (IEC 60695-1-30:2017)

Standard IEC 60695-1-30:2008 podaja vodilo za ocenjevanje in izbiro predlaganih materialov, komponent ali podsestavov za izdelavo končnega izdelka na podlagi predizbire preskušanja. Opisuje, kako predizbira zagotavlja primerljive preskusne metode požarne varnosti za ocenjevanje učinkovitosti preskušanca in kako se lahko predizbira uporabi pri izbiri materialov, delov, komponent in podsestavov med fazo načrtovanja končnega izdelka. Glavne spremembe glede na prejšnjo različico so naslednje:  – Dodatna razlaga v uvodu in področju uporabe  – Točka 3: spremenjene definicije  – Točka 4: pojasnila načel načrtovanja izdelka glede na predizbiro  – Točka 5: pojasnila prednosti in omejitev predizbire;  – Točka 6: pojasnila vidikov predizbire glede na oceno tveganja  – Dodatek A: spremembe referenčnih primerov preskusnih metod, ki se morda nanašajo na predizbiro  – Dodatek B: spremembe slikovnega primera diagrama poteka uporabe predizbire preskusov za požarno varnost določene vrste izdelka.  Ta publikacija ima status osnovne varnostne publikacije v skladu z vodili IEC 104 in ISO/IEC 51.

General Information

• Status: Published
• Publication Date: 25-May-2017
• Withdrawal Date: 27-Mar-2020
• ICS: 13.220.40 - Ignitability and burning behaviour of materials and products
• ICS: 29.020 - Electrical engineering in general
• Technical Committee: CLC/SR 89 - Fire hazard testing
• Drafting Committee: IEC/TC 89 - IEC_TC_89
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 26-May-2017
• Completion Date: 26-May-2017
• Ref Project: SIST EN 60695-1-30:2017 - Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines (IEC 60695-1-30:2017)

Relations

• Replaces: EN 60695-1-30:2008 - Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines
• Effective Date: 25-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60695-1-30:2017
01-julij-2017
1DGRPHãþD
SIST EN 60695-1-30:2009
Preskušanje požarne ogroženosti - 1-30. del: Vodilo za ocenjevanje požarne
varnosti elektrotehniških izdelkov - Predizbira preskusnih procesov - Splošno
vodilo (IEC 60695-1-30:2017)
Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical
products - Preselection testing process - General guidelines (IEC 60695-1-30:2017)
Prüfungen zur Beurteilung der Brandgefahr - Teil 1-30: Anleitung zur Beurteilung der
Brandgefahr von elektrotechnischen Erzeugnissen - Anwendung von
Vorauswahlverfahren - Allgemeiner Leitfaden (IEC 60695-1-30:2017)
Essais relatifs aux risques du feu - Partie 1-30: Lignes directrices pour l’évaluation des
risques du feu des produits électrotechniques - Processus d’essais de présélection -
Lignes directrices générales (IEC 60695-1-30:2017)
Ta slovenski standard je istoveten z: EN 60695-1-30:2017
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
29.020 Elektrotehnika na splošno Electrical engineering in
general
SIST EN 60695-1-30:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60695-1-30:2017

---------------------- Page: 2 ----------------------

SIST EN 60695-1-30:2017


EUROPEAN STANDARD EN 60695-1-30

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2017
ICS 13.220.40; 29.020 Supersedes EN 60695-1-30:2008
English Version
Fire hazard testing - Part 1-30: Guidance for assessing the fire
hazard of electrotechnical products -
Preselection testing process - General guidelines
(IEC 60695-1-30:2017)
Essais relatifs aux risques du feu - Partie 1-30: Lignes Prüfungen zur Beurteilung der Brandgefahr - Teil 1-30:
directrices pour l'évaluation des risques du feu des produits Anleitung zur Beurteilung der Brandgefahr von
électrotechniques - Processus d'essais de présélection - elektrotechnischen Erzeugnissen - Anwendung von
Lignes directrices générales Vorauswahlverfahren - Allgemeiner Leitfaden
(IEC 60695-1-30:2017) (IEC 60695-1-30:2017)
This European Standard was approved by CENELEC on 2017-03-28. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60695-1-30:2017 E

---------------------- Page: 3 ----------------------

SIST EN 60695-1-30:2017
EN 60695-1-30:2017
European foreword
The text of document 89/1350/FDIS, future edition 3 of IEC 60695-1-30, prepared by IEC/TC 89 "Fire
hazard testing" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 60695-1-30:2017.
The following dates are fixed:
• latest date by which the document has to be implemented at (dop) 2017-12-28
national level by publication of an identical national
standard or by endorsement
• latest date by which the national standards conflicting with (dow) 2020-03-28
the document have to be withdrawn

This document supersedes EN 60695-1-30:2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60695-1-30:2017 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated :
IEC 60335
...