EN 60061-3:1993/A48:2014
(Amendment)Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
2015-08-07: LVD directive removed for the whole EN 60061 series following D151/C072 taken on 2015-08-04.
Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und Sicherheit - Teil 3: Lehren
Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et de la sécurité - Partie 3: Calibres
Vznožki in okovi žarnic in sijalk skupaj s kalibri za kontrolo medsebojne zamenljivosti in varnosti - 3. del: Kalibri (IEC 60061-3:1969/A48:2014)
Vsebuje priporočila IEC v zvezi z vznožki in okovi žarnic in sijalk, ki so danes v splošni rabi, skupaj z ustreznimi kalibri, s ciljem zagotoviti mednarodno medsebojno zamenljivost. Ponazorjeni kalibri, čeprav načeloma splošno sprejeti, niso nujno edina oblika, v kateri so lahko narejeni.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60061-3:2000/A48:2014
01-julij-2014
Vznožki in okovi žarnic in sijalk skupaj s kalibri za kontrolo medsebojne
zamenljivosti in varnosti - 3. del: Kalibri (IEC 60061-3:1969/A48:2014)
Lamp caps and holders together with gauges for the control of interchangeability and
safety - Part 3: Gauges
Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und
Sicherheit - Teil 3: Lehren
Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et
de la sécurité - Partie 3: Calibres
Ta slovenski standard je istoveten z: EN 60061-3:1993/A48:2014
ICS:
29.140.10 Grla in držala žarnic Lamp caps and holders
SIST EN 60061-3:2000/A48:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60061-3:2000/A48:2014
---------------------- Page: 2 ----------------------
SIST EN 60061-3:2000/A48:2014
EUROPEAN STANDARD EN 60061-3:1993/A48
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2014
ICS 29.140.10
English Version
Lamp caps and holders together with gauges for the control of
interchangeability and safety - Part 3: Gauges
(IEC 60061-3:1969/A48:2014)
Culots de lampes et douilles ainsi que calibres pour le Lampensockel und -fassungen sowie Lehren zur Kontrolle
contrôle de l'interchangeabilité et de la sécurité - Partie 3: der Austauschbarkeit und Sicherheit - Teil 3: Lehren
Calibres (IEC 60061-3:1969/A48:2014)
(CEI 60061-3:1969/A48:2014)
This amendment A48 modifies the European Standard EN 60061-3:1993; it was approved by CENELEC on 2014-03-26. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60061-3:1993/A48:2014 E
---------------------- Page: 3 ----------------------
SIST EN 60061-3:2000/A48:2014
EN 60061-3:1993/A48:2014 - 2 -
Foreword
The text of document 34B/1712A/FDIS, future IEC 60061-3:1969/A48, prepared by SC 34B "Lamp
caps and holders" of IEC/TC 34 "Lamps and related equipment” was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 60061-3:1993/A48:2014.
The following dates are fixed:
(dop) 2014-12-26
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2017-03-26
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment
Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC).
Endorsement notice
The text of the International Standard IEC 60061-3:1969/A48:2014 was approved by CENELEC as a
European Standard without any modification.
---------------------- Page: 4 ----------------------
SIST EN 60061-3:2000/A48:2014
NORME CEI
INTERNATIONALE IEC
INTERNATIONAL 60061-3
STANDARD
AMENDEMENT 48
AMENDMENT 48
2014-02
Amendement 48
Culots de lampes et douilles ainsi que calibres
pour le contrôle de l'interchangeabilité
et de la sécurité –
Partie 3:
Calibres
Amendment 48
Lamp caps and holders together with
gauges for the control of interchangeability
and safety –
Part 3:
Gauges
Les feuilles de cet amendemen
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.