iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 61857-23:2002

(Main)

Electrical insulation systems - Procedures for thermal evaluation - Part 23: Specific requirements for general purpose, tall-channel model - Wire-wound electrical insulation systems (EIS)

Electrical insulation systems - Procedures for thermal evaluation - Part 23: Specific requirements for general purpose, tall-channel model - Wire-wound electrical insulation systems (EIS)

Specifies a general-purpose, tall-channel model (GPM-TC) which can be used for the evaluation of wire-wound electrical insulation systems (EIS) where the general-purpose model (GPM) defined in EN 61857-21 does not offer sufficient space for the electrical insulating materials (EIM) and/or winding wire to be evaluated.

Elektrische Isoliersysteme - Verfahren zur thermischen Bewertung - Teil 23: Spezielle Bedingungen für ein Mehrzweckmodell mit tiefer Nut - Elektrisches Isoliersystem auf Drahtwicklungen (EIS)

Systèmes d'isolation électriques - Procédures d'évaluation thermique - Partie 23: Exigences particulières pour le modèle d'usage général à chemin haut - Système d'isolation électrique (SIE) à enroulements à fil

Décrit le modèle d'usage général à chemin haut (GPM-TC) qui peut être utilisé pour évaluer les systèmes d'isolation électrique (SIE) ayant des enroulements à fils lorsque le modèle d'usage général qui est défini dans la EN 61857-21 ne propose pas suffisamment de place pour évaluer les matériaux d'isolation électrique (EIM: Electrical Insulating Material) et/ou les fils de bobinage.

Electrical insulation systems - Procedures for thermal evaluation - Part 23: Specific requirements for general purpose, tall-channel model - Wire-wound electrical insulation systems (EIS)

General Information

Status
Withdrawn
Publication Date
28-Oct-2002
Withdrawal Date
30-Sep-2005
ICS
29.080.30 - Insulation systems
Technical Committee
CLC/SR 112 - Evaluation and qualification of electrical insulating materials and systems (to be defined)
Drafting Committee
IEC/TC 112 - IEC_TC_112
Parallel Committee
IEC/TC 98 - IEC_TC_98
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Oct-2007
Completion Date
01-Oct-2007
Ref Project
SIST EN 61857-23:2003 - Electrical insulation systems - Procedures for thermal evaluation -- Part 23: Specific requirements for general purpose, tall-channel model - Wire-wound electrical insulation systems (EIS)

Relations

Replaced By
EN 61857-21:2004 - Electrical insulation systems - Procedures for thermal evaluation - Part 21: Specific requirements for general-purpose models - Wire-wound applications
Effective Date
29-Jan-2023

Buy Standard

EN 61857-23:2003EN 61857-23:2003
PreviousNext
Standard
EN 61857-23:2003
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI SIST EN 61857-23:2003

STANDARD
april 2003
Electrical insulation systems - Procedures for thermal evaluation - Part 23: Specific
requirements for general purpose, tall-channel model - Wire-wound electrical
insulation systems (EIS)
ICS 29.080.30 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD EN 61857-23
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2002

ICS 29.080.30
English version
Electrical insulation systems -
Procedures for thermal evaluation
Part 23: Specific requirements for general purpose,
tall-channel model -
Wire-wound electrical insulation systems (EIS)
(IEC 61857-23:2002)
Systèmes d'isolation électrique - Elektrische Isoliersysteme -
Procédures d'évaluation thermique Verfahren zur thermischen Bewertung
Partie 23: Exigences particulières Teil 23: Spezielle Bedingungen
pour le modèle d'usage général für ein Mehrzweckmodell mit tiefer Nut -
à chemin haut - Elektrisches Isoliersystem
Système d'isolation électrique (SIE) auf Drahtwicklungen (EIS)
à enroulements à fil (IEC 61857-23:2002)
(CEI 61857-23:2002)
This European Standard was approved by CENELEC on 2002-10-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Sta
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 61858-1:2014/AC:2024-05(Corrigendum)
Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 1: Wire-wound winding EIS
SIST EN 61858-1:2014/AC:2024
  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61857-32:2019(Main)
Electrical insulation systems - Procedures for thermal evaluation - Part 32: Multifactor evaluation with increased factors during diagnostic testing
SIST EN IEC 61857-32:2020

IEC 61857-32:2019 series is focused on applications where other possible factors need to be incorporated to evaluate any influence on the performance of the electrical insulation system (EIS). Multi-factor evaluation is the most complex type of project to design and conduct. Clear guidelines are needed to give the user of this document a uniform approach and a method to analyse the test results. This document is for applications where the stresses are some combination of other factors of influence identified in IEC 60505. The multi-factor stresses are applied during the diagnostic portion of each test cycle. A few examples of other factors of influence or multi-factor stresses are: – high vibration; – submersion in oils, water, or solutions; – voltage higher than the test voltage of the reference EIS; – decreased cold shock temperature.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61857-31:2017(Main)
Electrical insulation systems - Procedures for thermal evaluation - Part 31: Applications with a designed life of 5 000 h or less
SIST EN 61857-31:2017

IEC 61857-31:2017(E) establishes an EIS evaluation for applications with a designed life of 5 000 h or less. This test method follows the procedures of IEC 60505 and is modified based on the range of designed life.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60505:2011/AC:2017-03(Corrigendum)
Evaluation and qualification of electrical insulation systems
SIST EN 60505:2011/AC:2017

IEC corrigendum

  • Corrigendum
    3 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61858-1:2014(Main)
Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 1: Wire-wound winding EIS
SIST EN 61858-1:2014

IEC 61858-1:2014 lists the required test procedures for qualification of modifications of an established electrical insulation system (EIS) with respect to its thermal classification. This standard is applicable to EIS used in wire-wound winding electrotechnical devices. The test procedures are comparative in that the performance of a candidate EIS is compared to that of a reference EIS, which has proven service experience in accordance with IEC 60505 or has been evaluated by one of the procedures given in the IEC 61857 series. This first edition of IEC 61858-1 cancels and replaces the third edition of IEC 61858, published in 2008. It constitutes a technical and editorial revision. This edition includes the following significant technical changes with respect to the previous edition: a) this part is specifically for wire-wound winding EIS; b) new figures and charts support the contents.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61858-2:2014(Main)
Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 2: Form-wound EIS
SIST EN 61858-2:2014

IEC 61858-2:2014 lists the required test procedures for qualification of modifications of an established electrical insulation system (EIS) with respect to its thermal classification. This standard is applicable to EIS used in form-wound electrotechnical devices. The test procedures are comparative in that the performance of a candidate EIS is compared to that of a reference EIS, which has proven service experience in accordance with IEC 60505 or has been evaluated by one of the procedures given in IEC 60085 and IEC 60034-18-31.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62068:2013(Main)
Electrical insulating materials and systems - General method of evaluation of electrical endurance under repetitive voltage impulses
SIST EN 62068:2014

IEC 62068:2013 applies to electrical equipment, regardless of voltage, containing an insulation system, which is: - connected to an electronic power supply, and - requires an evaluation of insulation endurance under repetitive voltage impulses. This standard proposes a general test procedure to facilitate screening of electrical insulating materials (EIM) and systems (EIS) and to achieve a relative evaluation of insulation endurance under conditions of repetitive impulses. This first edition of IEC 62068 replaces IEC 62068-1:2003. It has been re-numbered as IEC 62068, as decided at the Plenary Meeting of TC 112 in Prague 2011. The main changes with regard to IEC 62068-1:2003 concern the terms and definitions which are now aligned, in part, on IEC/TS 61934 and IEC/TS 60034-18-42.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60505:2011(Main)
Evaluation and qualification of electrical insulation systems
SIST EN 60505:2011

IEC 60505:2011 establishes the basis for estimating the ageing of electrical insulation systems (EIS) under conditions of either electrical, thermal, mechanical, environmental stresses or combinations of these (multifactor stresses). It specifies the principles and procedures that shall be followed, during the development of EIS functional test and evaluation procedures, to establish the estimated service life for a specific EIS. This standard should be used by all IEC technical committees responsible for equipment having an EIS. The main change with respect to the previous edition is that Annex A: Glossary is now available in an Internet version as well as a hardcopy version. The internet version contains an abridged text version and a multimedia supplement.

  • Standard
    78 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61857-21:2009(Main)
Electrical insulation systems - Procedures for thermal evaluation - Part 21: Specific requirements for general-purpose models - Wire-wound applications
SIST EN 61857-21:2009

IEC 61857-21:2009 describes a general-purpose model (GPM) and a tall channel alternative model (GPM-TC) which can be used for the evaluation of wire-wound electrical insulation systems (EIS) where specific electrotechnical products are not available or required. The third edition cancels and replaces the second edition published in 2004, and constitutes editorial revisions to make this standard compatible with Parts 1 and 22.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61857-1:2009(Main)
Electrical insulation systems - Procedures for thermal evaluation - Part 1: General requirements - Low-voltage
SIST EN 61857-1:2009

IEC 61857-1:2008 specifies a general test procedure for the thermal evaluation and qualification of electrical insulation systems (EIS) and establishes a procedure that compares the performance of a candidate EIS to that of a reference EIS. This standard is applicable to existing or proposed EIS used in electrotechnical products with an input voltage of up to 1 000 V where the thermal factor is the dominating ageing factor. This third edition cancels and replaces the second edition published in 2004, and constitutes editorial revisions to make this standard compatible with Parts 21 and 22.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day