EN 60464-1:1999
(Main)Varnishes used for electrical insulation - Part 1: Definitions and general requirements
Varnishes used for electrical insulation - Part 1: Definitions and general requirements
Relates to varnishes used for electrical insulation. All varnishes contain solvent. The varnishes may be used for finishing or impregnating applications, and may be dried or dried and cured at ambient temperatures.
Elektroisolierlacke - Teil 1: Begriffe und allgemeine Anforderungen
Vernis utilisés pour l'isolation électrique - Partie 1: Définitions et prescriptions générales
Traite des vernis utilisés pour l'isolation électrique. Tous les vernis contiennent des solvants. Les vernis peuvent être utilisés pour des applications de finition ou d'impregnation, et peuvent être séchés et/ou durcis à températures ambientes ou à chaud.
Varnishes used for electrical insulation - Part 1: Definitions and general requirements (IEC 60464-1:1998)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Varnishes used for electrical insulation - Part 1: Definitions and general requirements (IEC 60464-1:1998)Elektroisolierlacke -- Teil 1: Begriffe und allgemeine AnforderungenVernis utilisés pour l'isolation électrique -- Partie 1: Définitions et prescriptions généralesVarnishes used for electrical insulation -- Part 1: Definitions and general requirements29.035.60Lakirani materialiVarnished fabrics01.040.29Elektrotehnika (Slovarji)Electrical engineering (Vocabularies)ICS:Ta slovenski standard je istoveten z:EN 60464-1:1999SIST EN 60464-1:2001en01-marec-2001SIST EN 60464-1:2001SLOVENSKI
STANDARD
SIST EN 60464-1:2001
SIST EN 60464-1:2001
SIST EN 60464-1:2001
SIST EN 60464-1:2001
SIST EN 60464-1:2001
NORMEINTERNATIONALECEIIECINTERNATIONALSTANDARD60464-1Deuxième éditionSecond edition1998-11Vernis utilisés pour l’isolation électrique –Partie 1:Définitions et prescriptions généralesVarnishes used for electrical insulation –Part 1:Definitions and general requirements Commission Electrotechnique Internationale International Electrotechnical
CommissionPour prix, voir catalogue en vigueurFor price, see current
catalogueÓ IEC 1998
Droits de reproduction réservés
¾ Copyright - all rights reservedAucune partie de cette publication ne peut être reproduite niutilisée sous quelque forme que ce soit et par aucunprocédé, électronique ou mécanique, y compris la photo-copie et les microfilms, sans l'accord écrit de l'éditeur.No part of this publication may be reproduced or utilized inany form or by any means, electronic or mechanical,including photocopying and microfilm, without
permission inwriting
from the publisher.International Electrotechnical Commission3, rue de Varembé
Geneva, SwitzerlandTelefax: +41 22 919 0300e-mail: inmail@iec.ch IEC web site
http: //www.iec.chCODE PRIXPRICE CODEHSIST EN 60464-1:2001
60464-1 ã IEC:1998– 3 –INTERNATIONAL ELECTROTECHNICAL COMMISSION___________VARNISHES USED FOR ELECTRICAL INSULATION –Part 1: Definitions and general requirementsFOREWORD1)The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprisingall national electrotechnical committees (IEC National Committees). The object of the IEC is to promoteinternational co-operation on all questions concerning standardization in the electrical and electronic fields. Tothis end and in addition to other activities, the IEC publishes International Standards. Their preparation isentrusted to technical committees; any IEC National Committee interested in the subject dealt with mayparticipate in this preparatory work. International, governmental and non-governmental organizations liaisingwith the IEC also participate in this preparation. The IEC collaborates closely with the International Organizationfor Standardization (ISO) in accordance with conditions determined by agreement between the twoorganizations.2)The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, aninternational consensus of opinion on the relevant subjects since each technical committee has representationfrom all interested National Committees.3)The documents produced have the form of recommendations for international use and are published in the formof standards, technical reports or guides and they are accepted by the National Committees in that sense.4)In order to promote international unification, IEC National Committees undertake to apply IEC InternationalStandards transparently to the maximum extent possible in their national and regional standards. Anydivergence between the IEC Standard and the corresponding national or regional standard shall be clearlyindicated in the latter.5)The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for anyequipment declared to be in conformity with one of its standards.6)Attention is drawn to the possibility that some of the elements of this International Standard may be the subjectof patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.International Standard IEC 60464-1 has been prepared by subcommittee 15C: Specifications,of IEC technical committee 15: Insulating materials.This second edition cancels and replaces the first edition published in 1976.The text of this standard is based on the following documents:FDISReport on voting15C/989/FDIS15C/1007/RVDFull information on the voting for the approval of this standard can be found in the report onvoting indicated in the above table.SIST EN 60464-1:2001
60464-1 ã IEC:1998– 5 –INTRODUCTIONThis International Standard is one of a series which deals with varnishes used for electricalinsulation. The series consists of three parts:Part 1: Definitions and general requirements (IEC 60464-1)Part 2: Methods of test (IEC 60464-2)Part 3: Specifications for individual materials (IEC 60464-3)SIST EN
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.