EN 62282-6-200:2008
(Main)Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
Provides test methods which are required for the performance evaluation of micro fuel cell power systems for laptop computers, mobile phones, personal digital assistants, etc. Describes the performance test methods for power characteristics, fuel consumption and mechanical durability for micro fuel cell power systems with output up to 60 V d.c. and 240 VA.
Brennstoffzellentechnologien - Teil 6-200: Mikrobrennstoffzellen-Energiesysteme - Leistungskennwerteprüfverfahren
Technologies des piles à combustible - Partie 6-200: Systèmes à micro-piles à combustible - Méthodes d'essai des performances
Fournit des méthodes d'essai qui sont exigées pour l'évaluation des performances des systèmes à micro-piles à combustible pour les ordinateurs portables, les téléphones mobiles, les assistants numériques personnels, etc. Décrit les méthodes d'essai de performance pour les caractéristiques d'alimentation, la consommation de combustible et la durabilité mécanique pour les systèmes à micro-piles à combustible avec sortie jusqu'à 60 V c.c. et 240 VA.
Tehnologija gorivnih celic - 6-200. del: Tehnologija mikro gorivnih celic - Metode določanje lastnosti (IEC 62282-6-200:2007)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2008
7HKQRORJLMDJRULYQLKFHOLFGHO 7HKQRORJLMDPLNURJRULYQLKFHOLF0HWRGH
GRORþDQMHODVWQRVWL ,(&
Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test
methods
Brennstoffzellentechnologien - Teil 6-200: Mikrobrennstoffzellen-Energiesysteme -
Leistungskennwerteprüfverfahren
Technologies des piles a combustible - Partie 6-200: Systemes a micro-piles a
combustible - Méthodes d'essai des performances
Ta slovenski standard je istoveten z: EN 62282-6-200:2008
ICS:
27.070 Gorilne celice Fuel cells
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 62282-6-200
NORME EUROPÉENNE
February 2008
EUROPÄISCHE NORM
ICS 27.070
English version
Fuel cell technologies -
Part 6-200: Micro fuel cell power systems -
Performance test methods
(IEC 62282-6-200:2007)
Technologies des piles à combustible - Brennstoffzellentechnologien -
Partie 6-200: Systèmes à micro-piles Teil 6-200: Mikrobrennstoffzellen-
à combustible - Energiesysteme -
Méthodes d'essai des performances Leistungskennwerteprüfverfahren
(CEI 62282-6-200:2007) (IEC 62282-6-200:2007)
This European Standard was approved by CENELEC on 2008-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62282-6-200:2008 E
Foreword
The text of document 105/151/FDIS, future edition 1 of IEC 62282-6-200, prepared by IEC TC 105, Fuel
cell technologies, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 62282-6-200 on 2008-02-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-11-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-02-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62282-6-200:2007 was approved by CENELEC as a European
Standard without any modification.
__________
– 3 – EN 62282-6-200:2008
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60051-1 – Direct acting indicating analogue electrical EN 60051-1 1998
measuring instruments and their
accessories -
Part 1: Definitions and general requirements
common to all parts
1) 2)
IEC 60051-2 – Direct acting indicating analogue electrical EN 60051-2 1989
measuring instruments and their
accessories -
Part 2: Special requirements for ammeters
and voltmeters
1) 2)
IEC 60068-2-6 – Environmental testing - EN 60068-2-6 2008
Part 2: Tests - Test Fc: Vibration (sinusoidal)
1) 2)
IEC 60721-3-7 – Classification of environmental conditions - EN 60721-3-7 1995
Part 3: Classification of groups of
environmental parameters and their
severities -
Section 7: Portable and non-stationary use
1)
ISO 4677-1 – Atmospheres for conditioning and testing - – –
Determination of relative humidity -
Part 1: Aspirated psychrometer method
1)
ISO 4677-2 – Atmospheres for conditioning and testing - – –
Determination of relative humidity -
Part 2: Whirling psychrometer method
1)
Undated reference.
2)
Valid edition at date of issue.
IEC 62282-6-200
Edition 1.0 2007-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fuel cell technologies –
Part 6-200: Micro fuel cell power systems – Performance test methods
Technologies des piles à combustible –
Partie 6-200: Systèmes à micro-piles à combustible – Méthodes d’essai des
performances
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
N
CODE PRIX
ICS 27.070 ISBN 2-8318-9353-4
– 2 – 62282-6-200 © IEC:2007
CONTENTS
FOREWORD.3
INTRODUCTION.5
1 Scope.6
2 Normative references .7
3 Terms and definitions .7
4 General principles .8
4.1 Testing environment.8
4.2 Minimum required measurement accuracy.8
4.3 Measuring instruments .8
4.3.1 General .8
4.3.2 Voltage.8
4.3.3 Current .8
4.3.4 Time.8
4.3.5 Weight.8
4.3.6 Temperature.9
4.3.7 Humidity .9
4.3.8 Pressure.9
4.3.9 Vibration frequency .9
5 Tests .9
5.1 Test procedure .9
5.2 Power generation characteristics.9
5.2.1 Starting duration.9
5.2.2 Rated power test and rated voltage test.9
5.2.3 Intermittent power generation test .10
5.2.4 Power generation test after disuse.10
5.2.5 Power generation test at low and high temperatures.10
5.2.6 Power generation test under low and high humidity conditions.10
5.2.7 Altitude test .11
5.3 Fuel consumption test .11
5.4 Mechanical durability tests .11
5.4.1 Drop test .11
5.4.2 Vibration test .12
6 Labelling and marking .12
7 Test report.12
Figure 1 – Functional arrangement addressed in the scope of this standard .6
Table 1 – Test report of micro fuel cell power system – Performance test .13
62282-6-200 © IEC:2007 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
FUEL CELL TECHNOLOGIES –
Part 6-200: Micro fuel cell power systems –
Performance test methods
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62282-6-200 has been prepared by IEC technical committee 105:
Fuel cell technologies.
The text of this standard is based on the following documents:
FDIS Report on voting
105/151/FDIS 105/165A/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
– 4 – 62282-6-200 © IEC:2007
A list of all parts of the IEC 62282 series, under the general title Fuel cell technologies, can
be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
62282-6-200 © IEC:2007 – 5 –
INTRODUCTION
With advancements in technology, the expectation or demand for the commercial introduction
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.