EN 62282-6-300:2013
(Main)Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability
Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability
IEC 62282-6-300:2012 covers interchangeability of micro fuel cell (MFC) fuel cartridges to provide the cartridge compatibility for a variety of MFC power units while maintaining the safety and performance of MFC power systems. For this purpose, the standard covers fuel cartridges and their connector designs. Fuel type, fuel concentration and fuel quality are also covered. This standard also provides for the means to avoid the miss-connection of an improper fuel cartridge. Test methods for verifying the compliance with the interchangeability requirements for fuel and fuel cartridges are also provided in this standard. The main changes with respect to the previous edition are listed below: - updates to Type A to D interchangeable connectors, addition of Type E; - updates of the procedures, criteria and figures of the type tests for interchangeable connectors to ensure accurate and consistent results.
Brennstoffzellentechnologien - Teil 6-300: Mikro-Brennstoffzellen-Energiesysteme - Austauschbarkeit der Brennstoffkartusche
Technologies des piles à combustible - Partie 6-300: Systèmes à micro-piles à combustible - Interchangeabilité de la cartouche de combustible
La CEI 62282-6-300:2012 couvre l'interchangeabilité des cartouches de combustible des micro-piles à combustible (MFC) pour assurer la compatibilité des cartouches pour différents blocs d'alimentation électrique MFC tout en maintenant la sécurité et les performances des systèmes MFC. Dans ce but, la norme couvre les cartouches de combustible et leurs types de connecteurs. Le type, la concentration et la qualité du combustible sont également traités. La présente norme fournit aussi les moyens d'éviter le raccordement avec une cartouche de combustible inappropriée. Des méthodes d'essai pour vérifier la conformité aux exigences d'interchangeabilité des combustibles et des cartouches de combustible sont également données dans la présente norme. Les modifications principales par rapport à l'édition précédente sont les suivantes: - mise à jour des connecteurs interchangeables de Types A à D, et ajout du Type E; - mise à jour des procédures, des critères et des figures des essais de type pour les connecteurs interchangeables, afin de garantir qu'ils produisent des résultats précis et cohérents.
Tehnologije gorivnih celic - 6-300. del: Elektroenergetski sistemi z mikro gorivnimi celicami - Izmenljivost gorivnih vložkov
Ta del standarda IEC 62282 določa minimalne varnostne zahteve za namestitev notranjih in zunanjih nepremičnih elektroenergetskih sistemov z gorivnimi celicami v skladu s standardom IEC 62282-3-100 in se uporablja za namestitev sistemov: – namenjenih za električno povezavo z glavnim električnim omrežjem, neposredno ali prek lahko dostopnega ročnega stikala ali odklopnika; – namenjenih za samostojni sistem za distribucijo električne energije; – namenjenih za dobavo enosmernega ali izmeničnega toka; – s sposobnostjo pridobivanja koristne toplote ali brez nje. Ta standard je omejen na pogoje, ki se lahko vzpostavijo med postopkom namestitve in lahko povzročijo nevarnost za osebje ali poškodujejo opremo ali imetje izven elektroenergetskega sistema z gorivnimi celicami.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2013
1DGRPHãþD
SIST EN 62282-6-300:2010
Tehnologije gorivnih celic - 6-300. del: Elektroenergetski sistemi z mikro gorivnimi
celicami - Izmenljivost gorivnih vložkov
Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge
interchangeability
/
Technologies des piles à combustible - Partie 6-300: Systèmes à micro piles à
combustible - Interchangeabilité de la cartouche de combustible
Ta slovenski standard je istoveten z: EN 62282-6-300:2013
ICS:
27.070 Gorilne celice Fuel cells
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 62282-6-300
NORME EUROPÉENNE
July 2013
EUROPÄISCHE NORM
ICS 27.070 Supersedes EN 62282-6-300:2009
English version
Fuel cell technologies -
Part 6-300: Micro fuel cell power systems -
Fuel cartridge interchangeability
(IEC 62282-6-300:2012)
Technologies des piles à combustible - Brennstoffzellentechnologien -
Partie 6-300: Systèmes à micro-piles à Teil 6-300: Mikrobrennstoffzellen-
combustible - Energiesysteme -
Interchangeabilité de la cartouche de Austauschbarkeit der Brennstoffkartusche
combustible (IEC 62282-6-300:2012)
(CEI 62282-6-300:2012)
This European Standard was approved by CENELEC on 2013-01-17. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62282-6-300:2013 E
Foreword
The text of document 105/370/CDV, future edition 2 of IEC 62282-6-300, prepared by IEC TC 105, "Fuel
cell technologies" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
(dop) 2014-01-05
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2016-01-17
standards conflicting with the
document have to be withdrawn
This document supersedes EN 62282-6-300:2009.
EN 62282-6-300:2009:
a) The status of designs yet to be included in the standard is clarified.
b) Type A to D interchangeable connectors are updated, and Type E is added.
c) The procedures, criteria and figures of the type tests for interchangeable connectors are updated to
ensure they produce accurate and consistent results.
d) The fuel quality requirements are updated including the test procedures for residue and impurities.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 62282-6-300:2012 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61032 NOTE Harmonized as EN 61032.
IEC 62282-6-200 NOTE Harmonized as EN 62282-6-200.
- 3 - EN 62282-6-300:2013
Annex ZA
(normative)
Normative references to i nternational publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60950-1 - Information technology equipment - Safety - EN 60950-1 -
Part 1: General requirements
IEC 62282-6-100 2010 Fuel cell technologies - EN 62282-6-100 2010
+ corr. December 2011 Part 6-100: Micro fuel cell power systems -
Safety
IEC 62282-6-200 - Fuel cell technologies - EN 62282-6-200 -
Part 6-200: Micro fuel cell power systems -
Performance test methods
ISO 1302 2002 Geometrical Product Specifications (GPS) - EN ISO 1302 2002
Indication of surface texture in technical
product documentation
IEC 62282-6-300 ®
Edition 2.0 2012-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fuel cell technologies –
Part 6-300: Micro fuel cell power systems – Fuel cartridge interchangeability
Technologies des piles à combustible –
Partie 6-300: Systèmes à micro-piles à combustible – Interchangeabilité de la
cartouche de combustible
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XE
ICS 27.070 ISBN 978-2-83220-555-6
– 2 – 62282-6-300 IEC:2012
CONTENTS
FOREWORD . 6
INTRODUCTION . 8
1 Scope . 9
2 Normative references . 10
3 Terms and definitions . 10
4 Fuel connectors . 13
4.1 Basic requirements . 13
4.1.1 Safety . 13
4.1.2 Safety of connectors during connecting, fueling and removing . 14
4.2 Construction and actuation requirements . 15
4.2.1 General . 15
4.2.2 Connector sealing . 15
4.2.3 Connector sequence . 15
4.2.4 Mechanical keys . 15
4.2.5 Material requirement . 15
4.3 Interchangeable fuel connectors . 15
4.3.1 General . 15
4.3.2 Type A . 16
4.3.3 Type B . 23
4.3.4 Type C . 30
4.3.5 Type D . 36
4.3.6 Type E . 42
4.4 Type tests for interchangeable fuel connectors . 47
4.4.1 Test types . 47
4.4.2 Mechanical strength requirement for interchangeable fuel connectors . 48
4.4.3 Test parameters . 48
4.4.4 Classification of cartridge size and connector strength . 49
4.4.5 Test fixtures . 49
4.4.6 Forces expected in normal operation and in foreseeable misuse (f1
and f2) . 50
4.4.7 Number of samples . 51
4.4.8 Laboratory conditions . 52
4.4.9 Type tests . 52
5 Fuel cartridge . 79
5.1 Fuel concentrations . 79
5.2 Cartridge pressure. 79
5.3 Cartridge capacity, size and shape . 79
5.3.1 Cartridge size and shape . 79
5.3.2 Cartridge capacity and usable fuel determination . 82
5.4 Maximum discharge pressure . 84
5.5 Fuel quality . 87
5.5.1 General requirements . 87
5.5.2 Fuel quality requirements . 87
5.5.3 Test sample . 88
5.5.4 Test procedure to measure the residue . 88
5.5.5 Impurities test . 89
62282-6-300 IEC:2012 – 3 –
5.5.6 Test set-up for impurities test with fuel cell operation . 91
6 Marking . 94
6.1 Cartridge marking . 94
6.2 MFC power unit or electronic device marking . 95
6.3 User information required in the manual or on the packaging . 96
Annex A (informative) Calculations of f1, f2, and maximum discharge pressure . 97
Annex B (informative) Test fixtures . 100
Bibliography . 103
Figure 1 – MFC power system block diagram . 10
Figure 2 – Fuel cartridge types . 12
Figure 3 – MFC power unit side connector design (cross-sectional view) . 16
Figure 4 – MFC power unit side connector design (front-elevational view) . 16
Figure 5 – Seal surface area design for MFC power unit side connector (cross-
sectional view) . 17
Figure 6 – Cartridge space for satellite cartridge (cross-sectional view) . 18
Figure 7 – Cartridge space for insert cartridge (cross-sectional view) . 19
Figure 8 – Mechanical key (wide and 2-key type) . 20
Figure 9 – Mechanical key (narrow and 3-key type) . 20
Figure 10 – Mechanical key variation with key number
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.