EN 61753-051-3:2013

Fibre optic interconnecting devices and passive components - Performance standard - Part 051-3: Single-mode fibre, plug style fixed attenuators for category U - Uncontrolled environment

IEC 61753-051-3: 2013 contains the minimum initial test and measurement requirements and severities which a fibre optic attenuator satisfies in order to be categorized as meeting the requirements of single-mode fibre, plug-style fixed attenuator devices used in uncontrolled environments. Optical performances specified in this standard relate to plug-style configurations optical attenuators only. This second edition cancels and replaces the first edition published in 2001 and constitutes a technical revision. The specific technical changes from the previous edition are to reconsider test details and requirement and the constitution of the standard. Keywords: fibre optic attenuator, uncontrolled environments

Lichtwellenleiter – Verbindungselemente und passive Bauteile – Betriebsverhalten - Teil 051-3: Lichtwellenleiter-Dämpfungsglieder mit Einmoden-Pigtail in Steckverbinderbauform für die Kategorie U - Unkontrollierte Umgebung

Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de performance - Partie 051-3: Affaiblisseurs fixes de type fiche pour fibres unimodales en catégorie U - Environnement non-contrôlé

La CEI 61753-051-3:2013 contient les exigences et les sévérités initiales minimales d'essais et de mesures auxquelles un affaiblisseur pour fibres optiques satisfait pour entrer dans une catégorie satisfaisant aux exigences applicables aux affaiblisseurs fixes de type fiche, pour fibres unimodales utilisés dans des environnements non-contrôlés. Les performances optiques spécifiées dans la présente norme concernent uniquement les affaiblisseurs optiques ayant des configurations de type fiche. Cette deuxième édition annule et remplace la première édition parue en 2001 dont elle constitue une révision technique. Les modifications techniques spécifiques par rapport à l'édition précédente portent sur un ré-examen de la description des essais et des exigences associées et de la constitution de la norme. Mots clés: affaiblisseur pour fibres optiques, environnements non-contrôlés

Optični spojni elementi in pasivne komponente - Tehnični standard - 051-3. del: Vtični optični slabilni člen enorodnega vlakna za kategorijo U - Nenadzorovano okolje

Ta del standarda IEC 61753 zajema najmanjše začetne zahteve in stopnje zahtevnosti za preskuse in meritve, ki jih mora izpolnjevati atenuator z optičnim vlaknom, da ustreza zahtevam za vtične nepomične atenuatorske naprave z enorodnim optičnim vlaknom, ki se uporabljajo v nadzorovanem okolju. V tem standardu navedene optične zmogljivosti veljajo samo za optične atenuatorje z vtičnimi konfiguracijami.

General Information

• Status: Published
• Publication Date: 09-May-2013
• Withdrawal Date: 12-Mar-2014
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 10-May-2013
• Completion Date: 10-May-2013
• Ref Project: SIST EN 61753-051-3:2013 - Fibre optic interconnecting devices and passive components - Performance standard - Part 051-3: Single mode fibre plug style optical attenuator for category U - Uncontrolled environment

Relations

• Replaces: EN 61753-051-3:2002 - Fibre optic interconnecting devices and passive components performance standard - Part 051-3: Single-mode fibre, plug-style fixed attenuators for category U - Uncontrolled environment
• Effective Date: 28-Jan-2023
• Replaced By: EN IEC 61753-051-02:2022 - Fibre optic interconnecting devices and passive components - Performance standard - Part 051-02: Plug-receptacle style single-mode fibre fixed optical attenuators for category C - Controlled environments
• Effective Date: 23-Aug-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61753-051-3:2013
01-oktober-2013
1DGRPHãþD
SIST EN 61753-051-3:2004
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH7HKQLþQLVWDQGDUGGHO
9WLþQLRSWLþQLVODELOQLþOHQHQRURGQHJDYODNQD]DNDWHJRULMR81HQDG]RURYDQR
RNROMH
Fibre optic interconnecting devices and passive components - Performance standard -
Part 051-3: Single mode fibre plug style optical attenuator for category U - Uncontrolled
environment
Lichtwellenleiter – Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
051-3: Lichtwellenleiter-Dämpfungsglieder mit Einmoden-Pigtail in
Steckverbinderbauform für die Kategorie U - Unkontrollierte Umgebung
Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de
performance - Partie 051-3: Affaiblisseur optique de type fiche pour fibres unimodales
pour la catégorie U - Environnement non contrôlé
Ta slovenski standard je istoveten z: EN 61753-051-3:2013
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61753-051-3:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61753-051-3:2013

---------------------- Page: 2 ----------------------

SIST EN 61753-051-3:2013

EUROPEAN STANDARD
EN 61753-051-3

NORME EUROPÉENNE
May 2013
EUROPÄISCHE NORM

ICS 33.180.20 Supersedes EN 61753-051-3:2002


English version


Fibre optic interconnecting devices and passive components -
Performance standard -
Part 051-3: Single-mode fibre, plug style fixed attenuators for category U -
Uncontrolled environment
(IEC 61753-051-3:2013)


Dispositifs d'interconnexion et composants Lichtwellenleiter – Verbindungselemente
passifs à fibres optiques - und passive Bauteile – Betriebsverhalten -
Norme de performance - Teil 051-3: Lichtwellenleiter-
Partie 051-3: Affaiblisseurs fixes de type Dämpfungsglieder mit Einmoden-Pigtail in
fiche pour fibres unimodales Steckverbinderbauform
en catégorie U - für die Kategorie U -
Environnement non-contrôlé Unkontrollierte Umgebung
(CEI 61753-051-3:2013) (IEC 61753-051-3:2013)



This European Standard was approved by CENELEC on 2013-03-13. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61753-051-3:2013 E

---------------------- Page: 3 ----------------------

SIST EN 61753-051-3:2013
EN 61753-051-3:2013 - 2 -

Foreword
The text of document 86B/3543/FDIS, future edition 2 of IEC 61753-051-3, prepared by SC 86B, "Fibre
optic interconnecting devices and passive components", of IEC TC 86, "Fibre optics" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-051-3:2013.

The following dates are fixed:
• latest date by which the document has (dop) 2013-12-13
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2014-03-13
• latest date by which the national
standards conflicting with the

document have to be withdrawn

This document supersedes EN 61753-051-3:2002.
The specific technical changes from EN 61753-051-3:2002 are to reconsider test details and requirement
and the constitution of the standard.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.

Endorsement notice
The text of the International Standard IEC 61753
...