EN 60684-3-280:2010

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking

IEC 60684-3-280:2010 gives the requirements for heat-shrinkable, polyolefin sleeving, anti-tracking with a nominal shrink ratio of 3:1. This sleeving has been found suitable for use at temperatures up to 100 °C. Typically: medium wall, internal diameter up to 110 mm.

Isolierschläuche - Teil 3: Anforderungen für einzelne Schlauchtypen - Blatt 280: Polyolefin-Wärmeschrumpfschläuche, kriechstromfest

Gaines isolantes souples - Partie 3: Spécifications pour types particuliers de gaines - Feuille 280: Gaines thermorétractables, en polyoléfine, anti-cheminement

La CEI 60684-3-280:2010 donne les exigences relatives aux gaines thermorétractables, en polyoléfine, anti-cheminement, présentant un rapport de rétreint nominal de 3:1. Ces gaines se sont révélées être adaptées à des températures jusqu'à 100 °C. Généralement: paroi moyenne, diamètre intérieur jusqu'à 110 mm.

Gibke izolacijske cevi - 3. del: Specifikacije za posamezne tipe cevi - 280. list: Toplotno skrčljive poliolefinske cevi za zaščito pred poškodbami (IEC 60684-3-280:2010)

Ta del IEC 60684 podaja zahteve za toplotno skrčljive poliolefinske cevi za zaščito pred poškodbami z nazivnim razmerjem krčenja 3:1. Za te cevi je ugotovljeno, da so primerne za uporabo pri temperaturah do 100 °C. Običajno za: srednje debelo steno z notranjim premerom do 110 mm. Te cevi se običajno dobavljajo v rdeči in rjavi barvi. Ker te vrste cevi zajemajo precej velik razpon velikosti in debelin stene, podaja preglednica A.1. v tem standardu vodilo o razponu razpoložljivih velikosti. Dejanska velikost se dogovori med uporabnikom in dobaviteljem. Materiali, skladni s to specifikacijo, ustrezajo vzpostavljenim ravnem delovanja. Vendar mora uporabnik material za določeno uporabo izbrati na podlagi dejanskih zahtev za ustrezno delovanje pri takšni uporabi in ne le na podlagi same specifikacije. Ta cevi so zasnovane za uporabo v kabelskih dodatkih srednje napetosti, zato mora biti dokazana njihova električna zmogljivost, kadar so del sklopa. Primeri tega so opisani v HD 629 in seriji IEC 60502.

General Information

• Status: Withdrawn
• Publication Date: 09-Sep-2010
• Withdrawal Date: 31-Aug-2013
• ICS: 29.035.20 - Plastics and rubber insulating materials
• Technical Committee: CLC/SR 15 - Insulating materials
• Drafting Committee: IEC/TC 15 - IEC_TC_15
• Parallel Committee: IEC/TC 15 - IEC_TC_15
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 24-Sep-2022
• Completion Date: 24-Sep-2022
• Ref Project: SIST EN 60684-3-280:2010 - Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking (IEC 60684-3-280:2010)

Relations

• Replaced By: EN IEC 60684-3-280:2019 - Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking
• Effective Date: 21-Aug-2018
• Amended By: EN 60684-3-280:2010/A1:2014 - Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2010
*LENHL]RODFLMVNHFHYLGHO6SHFLILNDFLMH]DSRVDPH]QHWLSHFHYLOLVW
7RSORWQRVNUþOMLYHSROLROHILQVNHFHYL]D]DãþLWRSUHGSRãNRGEDPL,(&

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet
280: Heat-shrinkable, polyolefin sleeving, anti-tracking (IEC 60684-3-280:2010)
Isolierschläuche - Teil 3: Anforderungen für einzelne Schlauchtypen - Blatt 280:
Polyolefin-Wärmeschrumpfschläuche, kriechstromfest (IEC 60684-3-280:2010)
Gaines isolantes souples - Partie 3: Spécifications pour types particuliers de gaines -
Feuille 280: Gaines thermorétractables, en polyoléfine, anti-cheminement (CEI 60684-3-
280:2010)
Ta slovenski standard je istoveten z: EN 60684-3-280:2010
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60684-3-280
NORME EUROPÉENNE
September 2010
EUROPÄISCHE NORM
ICS 29.035.20
English version
Flexible insulating sleeving -
Part 3: Specifications for individual types of sleeving -
Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking
(IEC 60684-3-280:2010)
Gaines isolantes souples -  Isolierschläuche -
Partie 3: Spécifications pour types Teil 3: Anforderungen für einzelne
particuliers de gaines - Schlauchtypen -
Feuille 280: Gaines thermorétractables, Blatt 280: Polyolefin-
en polyoléfine, anti-cheminement Wärmeschrumpfschläuche,
(CEI 60684-3-280:2010) kriechstromfest
(IEC 60684-3-280:2010)
This European Standard was approved by CENELEC on 2010-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60684-3-280:2010 E

Foreword
The text of document 15/562/FDIS, future edition 1 of IEC 60684-3-280, prepared by IEC TC 15, Solid
electrical insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 60684-3-280 on 2010-09-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2011-06-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2013-09-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60684-3-280:2010 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 60684-3-280:2010
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

- - Test requirements on accessories for use on HD 629.1 S2 2006
power cables of rated voltage
from 3,6/6(7,2) kV up to 20,8/36(42) kV -
Part 1: Cables with extruded insulation

IEC 60296 2003 Fluids for electrotechnical applications - EN 60296 2004
Unused mineral insulating oils for + corr. September 2004
transformers and switchgear
IEC 60502 Series Power cables with extruded insulation and - -
their accessories for rated voltages from 1 kV
(Um = 1,2 kV) up to 30 kV (Um = 36 kV)

IEC 60684-1 2003 Flexible insulating sleeving - EN 60684-1 2003
Part 1: Definitions and general requirements

IEC 60684-2 1997 Flexible insulating sleeving - EN 60684-2 1997
+ A1 2003 Part 2: Methods of test + A1 2003
+ A2 2005 + A2 2005
IEC 60757 1983 Code for designation of colours HD 457 S1 1985

ISO 846 1997 Plastics - Evaluation of the action of EN ISO 846 1997
microorganisms
ISO 4892-3 2006 Plastics - Methods of exposure to laboratory EN ISO 4892-3 2006
light sources -
Part 3: Fluorescent UV lamps
IEC 60684-3-280 ®
Edition 1.0 2010-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Flexible insulating sleeving –
Part 3: Specifications for individual types of sleeving –
Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking

Gaines isolantes souples –
Partie 3: Spécifications pour types particuliers de gaines –
Feuille 280: Gaines thermorétractables, en polyoléfine, anti-cheminement

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
L
CODE PRIX
ICS 29.035.20 ISBN 978-2-88910-964-7
– 2 – 60684-3-280 © IEC:2010
CONTENTS
FOREWORD.3
INTRODUCTION.5
1 Scope.6
2 Normative references .6
3 Designation .7
4 Conditions of test .7
5 Requirements .7
6 Sleeving conformance .7
Annex A (informative) Guidance on the available sizes and wall thicknesses .11

Table 1 – Property requirements .8
Table 2 – Requirements for dielectric strength .9
Table 3 – Resistance to selected fluids .9
Table 4 – Additional property requirements.10
Table A.1 – Guidance on the available sizes and wall thicknesses.11

60684-3-280 © IEC:2010 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
______________
FLEXIBLE INSULATING SLEEVING –

Part 3: Specifications for individual types of sleeving –
Sheet 280: Heat-shrinkable, polyolefin sleeving,
anti-tracking
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60684-3-280 has been prepared by IEC technical committee 15:
Solid electrical insulating materials.
The text of this standard is based on the following documents:
FDIS Report on voting
15/562/FDIS 15/585/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

– 4 – 60684-3-280 © IEC:2010
A list of all the parts in the IEC 60684 series, published under the general title Flexible
insulating sleeving, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
60684-3-280 © IEC:2010 – 5 –
INTRODUCTION
This International Standard is one of a series which deals with flexible insulating sleeving for
electrical purposes.
The series consists of three parts:
Part 1: Definitions and general requirements (IEC 60684-1)
Part 2: Methods of test (IEC 60684-2)
Part 3: Specifications for individual types of sleeving (IEC 60684-3)
This standard comprises one of the sheets of Part 3 as follows:
Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking

– 6 – 60684-3-280 © IEC:2010
FLEXIBLE INSULATING SLEEVING –

Part 3: Specifications for individual types of sleeving –
Sheet 280: Heat-shrinkable, polyolefin sleeving,
anti-tracking
1 Scope
This part of IEC 60684 gives the requirements for heat-shrinkable, polyolefin sleeving, anti-
tracking with a nominal shrink ratio of 3:1.
This sleeving has been found suitable for use at temperatures up to 100 °C.
Typically: medium wall, internal diameter up to 110 mm.
These sleevings are normally supplied in the colours red or brown.
Since these types of sleevings cover a significantly large range of sizes and wall thicknesses,
Table A.1 in this standard provides guidance on the range
...