EN 61753-381-6:2016
(Main)Fibre optic interconnecting devices and passive components - Performance standard - Part 381-6: Cyclic arrayed waveguide grating - Category O (uncontrolled environment)
Fibre optic interconnecting devices and passive components - Performance standard - Part 381-6: Cyclic arrayed waveguide grating - Category O (uncontrolled environment)
IEC 61753-381-6:2016 contains the minimum initial test and measurement requirements and severities which a Gaussian-passband-profile cyclic arrayed waveguide grating (AWG) for single bidirectional transmission systems satisfies in order to be categorised as meeting the requirements of IEC 61753-1 for category O (uncontrolled environment). This standard pertains to wavelength division multiplexing (WDM) network with multiple spectral-band usage. This standard covers the requirements of cyclic AWG devices with free spectral range (FSR) characteristics to ensure multiple spectral bands transmission performance. The requirement covers devices with single-mode non-connectorized pigtails and no electric circuit board. Keywords: Keywords: Gaussian-passband-profile cyclic arrayed waveguide grating (AWG), wavelength division multiplexing (WDM), category O (uncontrolled environment)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 381-6: Zyklisches Array-Wellenleitergitter für die Kategorie O - Unkontrollierte Umgebung
Dispositifs d'interconnexion et composants passifs à fibres optiques – Norme de performance - Partie 381-6: Réseau sélectif planaire cyclique – Catégorie O (environnement non contrôlé)
L'IEC 61753-381-6:2016 contient les exigences minimales et les sévérités initiales d'essais et de mesures auxquelles satisfait un réseau sélectif planaire (AWG) cyclique de profil passe-bande gaussien pour systèmes de transmission bidirectionnels uniques, afin d'être considéré conforme aux exigences de l'IEC 61753-1 pour la catégorie O (environnement non contrôlé). La présente norme se rapporte aux réseaux multiplexés par répartition en longueur d'onde (WDM) avec utilisation de plusieurs bandes spectrales. La présente norme couvre les exigences des dispositifs AWG cycliques avec des caractéristiques de plage spectrale libre (FSR) garantissant des performances de transmissions sur plusieurs bandes spectrales. L'exigence couvre les dispositifs avec des fibres amorces unimodales non connectorisées et sans circuit électrique. Mots clés: réseau sélectif planaire (AWG) cyclique de profil passe-bande gaussien, réseaux multiplexés par répartition en longueur d'onde (WDM), catégorie O (environnement non contrôlé)
Optični spojni elementi in pasivne komponente - Tehnični standard - 381-6. del: Ciklično razporejeni valovodi za kategorijo O - Nenadzorovano okolje (IEC 61753-381-6:2016)
Ta del standarda IEC 61753 vključuje minimalne zahteve in stopnje zahtevnosti glede začetnega preskusa ter meritev, ki jih mora izpolnjevati ciklično razporejeni valovod (AWG) s profilom Gaussovega prepustnega pasu za enorodne dvosmerne oddajne sisteme, da je lahko kategoriziran kot oprema, ki izpolnjuje zahteve standarda IEC 61753-1 za kategorijo O (nenadzorovano okolje). Ta standard se nanaša na omrežje valovno-dolžinskega multipleksiranja (WDM) z uporabo več spektralnih pasov. Ta standard vključuje zahteve cikličnih razporejenih valovodov (AWG) z lastnostmi prostega spektralnega območja (FSR), da se zagotovi zmogljivost oddajanja v več spektralnih pasovih. Zahteve zajemajo naprave z enorodnimi zaključnimi kabli brez konektorjev in brez plošče z vezji.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2016
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH7HKQLþQLVWDQGDUGGHO
&LNOLþQRUD]SRUHMHQLYDORYRGL]DNDWHJRULMR21HQDG]RURYDQRRNROMH,(&
Fibre optic interconnecting devices and passive components - Performance standard -
Part 381-6: Cyclic Arrayed Waveguide Grating for category O - Uncontrolled environment
(IEC 61753-381-6:2016)
Ta slovenski standard je istoveten z: EN 61753-381-6:2016
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 61753-381-6
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2016
ICS 33.180.20
English Version
Fibre optic interconnecting devices and passive components -
Performance standard -
Part 381-6: Cyclic arrayed waveguide grating - Category O
(uncontrolled environment)
(IEC 61753-381-6:2016)
Dispositifs d'interconnexion et composants passifs à fibres Lichtwellenleiter - Verbindungselemente und passive
optiques - Norme de performance - Bauteile - Betriebsverhalten -
Partie 381-6: Réseau sélectif planaire cyclique - Catégorie Teil 381-6: Zyklisches Array-Wellenleitergitter für die
O (environnement non contrôlé) Kategorie O - Unkontrollierte Umgebung
(IEC 61753-381-6:2016) (IEC 61753-381-6:2016)
This European Standard was approved by CENELEC on 2016-02-09. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61753-381-6:2016 E
European foreword
The text of document 86B/3955/FDIS, future edition 1 of IEC 61753-381-6, prepared by SC 86B “Fibre
optic interconnecting devices and passive components” of IEC/TC 86 “Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-381-6:2016.
The following dates are fixed:
(dop) 2016-11-09
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2019-02-09
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61753-381-6:2016 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61300 Series NOTE Harmonized as EN 61300 Series.
IEC 61300-2-17 NOTE Harmonized as EN 61300-2-17.
IEC 61300-2-18 NOTE Harmonized as EN 61300-2-18.
IEC 61753-081-2 NOTE Harmonized as EN 61753-081-2.
IEC 61753-1 NOTE Harmonized as EN 61753-1.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year
IEC 61300-2-1 - Fibre optic interconnecting devices and EN 61300-2-1 -
passive components - Basic test and
measurement procedures -
Part 2-1: Tests - Vibration (sinusoidal)
IEC 61300-2-4 - Fibre optic interconnecting devices and - -
passive components - Basic test and
measurement procedures -
Part 2-4: Tests - Fibre/cable retention
IEC 61300-2-5 - Fibre optic interconnecting devices and EN 61300-2-5 -
passive components - Basic test and
measurement procedures -
Part 2-5: Tests - Torsion
IEC 61300-2-9 - Fibre optic interconnecting devices and EN 61300-2-9 -
passive components - Basic test and
measurement procedures -
Part 2-9: Tests - Shock
IEC 61300-2-14 - Fibre optic interconnecting devices and EN 61300-2-14 -
passive components - Basic test and
measurement procedures -
Part 2-14: Tests - High optical power
IEC 61300-2-19 - Fibre optic interconnecting devices and EN 61300-2-19 -
passive components - Basic test and
measurement procedures -
Part 2-19: Tests - Damp heat (steady
state)
IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 -
passive components - Basic test and
measurement procedures -
Part 2-22: Tests - Change of temperature
IEC 61300-2-42 - Fibre optic interconnecting devices and EN 61300-2-42 -
passive components - Basic test and
measurement procedures -
Part 2-42: Tests - Static side load for strain
relief
Publication Year Title EN/HD Year
IEC 61300-2-44 - Fibre optic interconnecting devices and EN 61300-2-44 -
passive components - Basic test and
measurement procedures -
Part 2-44: Tests - Flexing of the strain relief
of fibre optic devices
IEC 61300-2-48 - Fibre optic interconnecting devices and EN 61300-2-48 -
passive components - Basic test and
measurement procedures -
Part 2-48: Tests - Temperature-humidity
cycling
IEC 61300-3-2 - Fibre optic interconnecting devices and EN 61300-3-2 -
passive components - Basic test and
measurement procedures -
Part 3-2: Examination and measurements -
Polarization dependent loss in a single-
mode fibre optic device
IEC 61300-3-6 - Fibre optic interconnecting devices and EN 61300-3-6 -
passive components - Basic test and
measurement procedures -
Part 3-6: Examinations and measurements
- Return loss
IEC 61300-3-20 - Fibre optic interconnecting devices and EN 61300-3-20 -
passive components - Basic test and
measurement procedures -
Part 3-20: Examinations and
measurements - Directivity of fibre optic
branching devices
IEC 61300-3-29 - Fibre optic interconnecting devices and EN 61300-3-29 -
passive components - Basic test and
measurement procedures -
Part 3-29: Examinations and
measurements - Spectral transfer
characteristics of DWDM devices
IEC 61300-3-32 - Fibre optic interconnecting devices and EN 61300-3-32 -
passive components - Basic test and
measurement procedures -
Part 3-32: Examinations and
measurements - Polarisation mode
dispersion measurement for passive
optical components
IEC 61300-3-38 - Fibre optic interconnecting devices and EN 61300-3-38 -
passive components - Basic test and
measurement procedures -
Part 3-38:Examinations and
measurements - Group delay, chromatic
dispersion and phase ripple
IEC 61753-021-6 - Fibre optic interconnecting devices and EN 61753-021-6 -
passive components performance standard
- Part 021-6: Grade B/2 single-mode fibre
optic connectors for category O -
Uncontrolled environment
Publication Year Title EN/HD Year
IEC 62074-1 - Fibre optic interconnecting devices and EN 62074-1 -
passive components - Fibre optic WDM
devices -
Part 1: Generic specification
ITU-T - Optical interfaces for multichannel systems - -
Recommendation with optical amplifiers
G.692
ITU-T - Spectral grids for WDM applications: - -
Recommendation DWDM frequency grid
G.694.1
ITU-T - Multichannel seeded DWDM applications - -
Recommendation with single-channel optical interfaces
G.698.3
IEC 61753-381-6 ®
Edition 1.0 2016-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Performance
standard –
Part 381-6: Cyclic arrayed waveguide grating – Category O (uncontrolled
environment)
Dispositifs d'interconnexion et composants passifs à fibres optiques – Norme
de performance –
Partie 381-6: Réseau sélectif planaire cyclique – Catégorie O (environnement
non contrôlé)
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.20 ISBN 978-2-8322-3097-8
– 2 – IEC 61753-381-6:2016 © IEC 2016
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Test conditions . 7
5 Test report . 8
6 Reference components . 8
7 Performance requirements. 8
7.1 Dimensions . 8
7.2 Test details and requirements . 8
Annex A (normative) Sequencing and grouping of tests . 15
Annex B (informative) General information on cyclic AWGs . 16
Annex C (informative) Channel frequency range and free spectral range . 18
Annex D (informative) Summary of differences between IEC 61753-081-2 and
IEC 61753-381-6 . 19
Bibliography . 20
Figure 1 – Illustration of cyclic AWGs . 7
Figure B.1 – Single bidirectional transmission with cyclic AWGs . 16
Figure B.2 − Reference diagram of ITU-T G.698.3 . 17
Figure C.1 − Description of channel frequency range and free spectral range . 18
Table 1 – Tests and requirements of optical performance parameters . 9
Table 2 – Environmental tests & mechanical tests . 12
Table A.1 – Sample size for each test . 15
Table D.1 – Summary of differences between IEC 61753-081-2 and IEC61753-381-6 . 19
IEC 61753-381-6:2016 © IEC 2016 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
PERFORMANCE STANDARD –
Part 381-6: Cyclic arrayed waveguide grating –
Category O (uncontrolled environment)
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees;
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.