iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60034-2:1996

(Main)

Rotating electrical machines - Part 2: Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles)

Rotating electrical machines - Part 2: Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles)

Applies to d.c. machines and to a.c. synchronous and induction machines. The principles can be applied to other types of machines such as rotary converters, a.c. commutator motors and single-phase induction motors for which other methods of determining losses are used.

Drehende elektrische Maschinen - Teil 2: Verfahren zur Bestimmung der Verluste und des Wirkungsgrades von drehenden elektrischen Maschinen aus Prüfungen (ausgenommen Maschinen für Schienen- und Straßenfahrzeuge)

Machines électriques tournantes - Partie 2: Méthodes pour la détermination des pertes et du rendement des machines électriques tournantes à partir d'essais (à l'exclusion des machines pour véhicules de traction)

S'applique aux machines à courant continu ainsi qu'aux machines à courant alternatif, synchrones et à induction. Les principes peuvent être adoptés pour d'autres types de machines telles que les commutatrices, des moteurs à collecteur et les moteurs à induction monophasés pour lesquels on applique en général d'autres méthodes de détermination des pertes.

Rotating electrical machines - Part 2: Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles) (IEC 60034-2:1972 + IEC 60034-2A:1974)

General Information

Status
Withdrawn
Publication Date
26-Nov-1996
Withdrawal Date
26-May-1997
ICS
29.160 - Rotating machinery
Technical Committee
CLC/TC 2 - Rotating machinery
Drafting Committee
IEC/TC 2 - IEC_TC_2
Parallel Committee
IEC/TC 2 - IEC_TC_2
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Nov-2010
Completion Date
01-Nov-2010
Directive
2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
73/23/EEC - Electrical equipment designed for use within certain voltage limits
Ref Project
SIST EN 60034-2:1999 - Rotating electrical machines -- Part 2: Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles)

Relations

Split Into
EN 60034-2-1:2014 - Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
Effective Date
28-Jan-2023
Replaced By
EN 60034-2-1:2007 - Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
Effective Date
29-Jan-2023
Amended By
EN 60034-2:1996/A1:1996 - Rotating electrical machines - Part 2: Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles)
Effective Date
28-Jan-2023
Amended By
EN 60034-2:1996/A2:1996 - Rotating electrical machines - Part 2: Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles)
Effective Date
28-Jan-2023

Buy Standard

EN 60034-2:1999EN 60034-2:1999
PreviousNext
Standard
EN 60034-2:1999
English language
53 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60034-2:1999
01-april-1999
Rotating electrical machines - Part 2: Methods for determining losses and
efficiency of rotating electrical machinery from tests (excluding machines for
traction vehicles) (IEC 60034-2:1972 + IEC 60034-2A:1974)
Rotating electrical machines -- Part 2: Methods for determining losses and efficiency of
rotating electrical machinery from tests (excluding machines for traction vehicles)
Drehende elektrische Maschinen -- Teil 2: Verfahren zur Bestimmung der Verluste und
des Wirkungsgrades von drehenden elektrischen Maschinen aus Prüfungen
(ausgenommen Maschinen für Schienen- und Straßenfahrzeuge)
Machines électriques tournantes -- Partie 2: Méthodes pour la détermination des pertes
et du rendement des machines électriques tournantes à partir d'essais (à l'exclusion des
machines pour véhicules de traction)
Ta slovenski standard je istoveten z: EN 60034-2:1996
ICS:
29.160.01 Rotacijski stroji na splošno Rotating machinery in
general
SIST EN 60034-2:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 2 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 3 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 4 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 5 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 6 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 7 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 8 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 9 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 10 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 11 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 12 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 13 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 14 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 15 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 16 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 17 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 18 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 19 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 20 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 21 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 22 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 23 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 24 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 25 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 26 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 27 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 28 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 29 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 30 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 31 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 32 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 33 ----------------------

SIST EN 60034-2:1999

---------------------- Page: 34 ----------------------

SIST EN 60034-2:1999
CEI
NORME
INTERNATIONALE IEC
34-2A
INTERNATIONAL
Première édition
STANDARD
First edition
1974
Premier complément à la Publication 34-2 (1972)
Machines électriques tournantes
Deuxième partie:
Méthodes pour la détermination des pertes et du rendement
des machines électriques tournantes à partir d'essais
(à l'exclusion des machines pour véhicules de traction)
Mesure des pertes par la méthode calorimétrique
First supplement to Publication 34-2 (1972)
Rotating electrical machines
Part 2:
Methods for determining losses and efficiency
of rotating electrical machinery from tests
(excluding machines for traction vehicles)
Measurement of losses by the calorimetric method
CEI 1974 Droits de reproduction réservés — Copyright — all rights reserved
©
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun pro- any form or by any means, electronic or mechanical,
cédé, électronique ou mécanique, y compris la photocopie et including photocopying and microfilm, without p
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60034-30-3:2024(Main)
Rotating electrical machines - Part 30-3: Efficiency classes of high voltage AC motors (IE-code)
oSIST prEN 60034-30-3:2023

IEC 60034-30-3:2024 specifies efficiency classes for fixed-speed three-phase high-voltage cage induction motors in accordance with IEC 60034-1 that - have a rated voltage exceeding 1 000 V, but not exceeding 11 kV; - have a rated power from 200 kW to 2 000 kW; This document provides the global harmonization of energy-efficiency classes of three-phase cage induction motors with rated voltage above 1 000 V that are rated for direct online starting and fixed-speed operation at a 50 Hz or 60 Hz supply with sinusoidal voltage.

  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60034-18-1:2023(Main)
Rotating electrical machines - Part 18-1: Functional evaluation of insulation systems - General guidelines
SIST EN IEC 60034-18-1:2023

This part of IEC 60034 deals with the general guidelines for functional evaluation of electrical insulation systems, used or proposed to be used in rotating electrical machines within the scope of IEC 60034-1, in order to qualify them.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60034-18-32:2022(Main)
Rotating electrical machines - Part 18-32: Functional evaluation of insulation systems (Type II) - Electrical endurance qualification procedures for form-wound windings
SIST EN IEC 60034-18-32:2022

This part of IEC 60034-18 describes qualification procedures for the evaluation of electrical endurance of insulation systems for use in rotating electrical machines using form-wound windings. The test procedures are comparative in nature, such that the performance of a candidate insulation system is compared to that of a reference insulation system with proven service experience. If no reference system is available, the diagram in Annex A is available for use. The qualification procedures of inverter duty insulation system for form-wound windings can be found in IEC 60034-18-42 or IEC 60034-18-41.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60034-18-41:2014/A1:2019/AC:2020-12(Corrigendum)
Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in electrical rotating machines fed from voltage converters - Qualification and quality control tests
SIST EN 60034-18-41:2014/A1:2020/AC:2021

2020-12-25 - IEC Corrected Version

  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60034-3:2020(Main)
Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators
SIST EN IEC 60034-3:2020

IEC 60034-3:2020 applies to large three-phase synchronous generators, having rated outputs of 10 MVA and above driven by steam turbines or combustion gas turbines. Also included are synchronous Mvar compensators of the same output range connected to a grid for the purpose of exchanging reactive power. This document supplements basic requirements for rotating machines given in IEC 60034-1. This seventh edition cancels and replaces the sixth edition published in 2007. This edition includes the following significant technical changes with respect to the previous edition: - title modified; - scope extended to synchronous compensators; - rotor overcurrent requirements added; - impact of stator harmonics on rotor unbalanced load capability introduced; - synchronisation requirements added; - adjustments of temperatures or temperature rise revised for gas turbine applications; - requirements for auxiliaries updated.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60034-5:2020(Main)
Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
SIST EN IEC 60034-5:2020

IEC 60034-5:2020 is available as IEC 60034-5:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60034-5:2020 applies to the classification of degrees of protection provided by enclosures for rotating electrical machines. It defines the requirements for protective enclosures that are in all other respects suitable for their intended use and which, from the point of view of materials and workmanship, ensure that the properties dealt with in this document are maintained under normal conditions of use. This document does not specify degrees of protection against mechanical damage of the machine, or conditions such as moisture (produced for example by condensation), corrosive dust and vapour, fungus or vermin. This document is also applicable to explosion proof machines, but it does not specify the types of protection for use in a potentially explosive (dust, gas) environment. Those are defined in the IEC 60079 series of standards. This document gives definitions for standard degrees of protection provided by enclosures applicable to rotating electrical machines as regards the: a. protection of persons against contacts with or approach to live parts and against contact with moving parts (other than smooth rotating shafts and the like) inside the enclosure and protection of the machine against ingress of solid foreign objects b. protection of machines against the harmful effects due to ingress of water; c. protection of machines against the harmful effects due to ingress of dust. This fifth edition cancels and replaces the fourth edition, published in 2000, and its Amendment 1:2006.The main technical changes with respect to the previous edition are: - the inclusion of an additional second numeral 9 including its test method, - an additional note for clarification in Table 3, - a clarification on the term open drain hole, - a clarification on the ingress of dust in Table 4, - pressure values given now in Pa only, - a clarification in the scope on the applicability of this standard for (Ex) motors, - a new Clause 3 with definitions,

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60034-18-41:2014/A1:2019(Amendment)
Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters - Qualification and quality control tests
SIST EN 60034-18-41:2014/A1:2020

The contents of the corrigendum of December 2020 have been included in this copy.

  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60034-14:2018(Main)
Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity
SIST EN IEC 60034-14:2019

NEW!IEC 60034-14:2018 is available as IEC 60034-14:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60034-14:2018 specifies the factory acceptance vibration test procedures and vibration limits for certain electrical machines under specified conditions, when uncoupled from any load or prime mover. It is applicable to DC and three-phase AC machines, with shaft heights 56 mm and higher and a rated output up to 50 MW, at operational speeds from 120 min–1 up to and including 15 000 min–1. This new edition includes the following significant technical changes with respect to the previous edition: - Improved explanation of the definition “free suspension”. - Addition of an alternative method of rigid mount - Definition of an improved option for shaft key.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60034-4-1:2018(Main)
Rotating electrical machines - Part 4-1: Methods for determining electrically excited synchronous machine quantities from tests
SIST EN IEC 60034-4-1:2019

IEC 60034-4-1:2018 applies to three-phase synchronous machines of 1 kVA rating and larger and describes methods intended to be used for machines having an excitation winding with slip-rings and brushes for their supply. Synchronous machines with brushless excitation require special effort for some of the tests. For machines with permanent magnet excitation, there is a limited applicability of the described tests, and special precautions should be taken against irreversible demagnetization.

  • Standard
    75 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60034-12:2017(Main)
Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
SIST EN 60034-12:2018

NEW!IEC 60034-12:2016 is available as IEC 60034-12:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60034-12:2016 specifies the parameters for eight designs of starting performance of single-speed three-phase 50 Hz or 60 Hz cage induction motors in accordance with IEC 60034-1 that: - have a rated voltage up to 1 000 V; - are intended for direct-on-line or star-delta starting; - are rated on the basis of duty type S1; - are constructed to any degree of protection and explosion protection. The main changes with respect to the previous edition are as follows: - new design letter E for extended efficiency motors, explanation of all design letters, and description of new designs NE, NEY, HE, and HEY; - addition of a reference to IEC 60079-7; - addition of a formula to calculate locked rotor current from apparent power.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day