EN 60051-4:1989

Direct acting indicating analogue electrical measuring instruments and their accessories - Part 4: Special requirements for frequency meters

Applies to direct acting indicating frequency meters, and to non-interchangeable accessories used with frequency meters.

Direkt wirkende anzeigende elektrische Meßgeräte und ihr Zubehör; Meßgeräte mit Skalenanzeige - Teil 4: Spezielle Anforderungen für Frequenz-Meßgeräte

Appareils mesureurs électriques indicateurs analogiques à action directe et leurs accessoires - Partie 4: Prescriptions particulières pour les fréquencemètres

S'applique aux fréquencemètres indicateurs analogiques à action directe. S'applique également aux accessoires interchangeables utilisés avec ces appareils.

Neposredni kazalni analogni električni merilni instrumenti in njihov pribor – 4. del: Posebne zahteve za merilnike frekvence (IEC 60051-4:1984)

General Information

• Status: Withdrawn
• Publication Date: 15-Nov-1989
• Withdrawal Date: 31-Aug-1990
• ICS: 17.220.20 - Measurement of electrical and magnetic quantities
• Technical Committee: CLC/TC 85X - Measuring equipment for electrical and electromagnetic quantities
• Drafting Committee: IEC/TC 85 - IEC_TC_85
• Parallel Committee: IEC/TC 85 - IEC_TC_85
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 30-Apr-2024
• Completion Date: 30-Apr-2024
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Ref Project: SIST EN 60051-4:1995 - Direct acting indicating analogue electrical measuring instruments and their accessories -- Part 4: Special requirements for frequency meters

Relations

• Replaced By: EN IEC 60051-4:2021 - Direct acting indicating analogue electrical measuring instruments and their accessories title - Part 4: Special requirements for frequency meters
• Effective Date: 23-Aug-2016

Standards Content (Sample)

SLOVENSKI STANDARD
01-avgust-1995
1HSRVUHGQLND]DOQLDQDORJQLHOHNWULþQLPHULOQLLQVWUXPHQWLLQQMLKRYSULERU±GHO
3RVHEQH]DKWHYH]DPHULOQLNHIUHNYHQFH,(&
Direct acting indicating analogue electrical measuring instruments and their accessories -
- Part 4: Special requirements for frequency meters
Direkt wirkende anzeigende elektrische Meßgeräte und ihr Zubehör; Meßgeräte mit
Skalenanzeige -- Teil 4: Spezielle Anforderungen für Frequenz-Meßgeräte
Appareils mesureurs électriques indicateurs analogiques à action directe et leurs
accessoires -- Partie 4: Prescriptions particulières pour les fréquencemètres
Ta slovenski standard je istoveten z: EN 60051-4:1989
ICS:
17.220.20 0HUMHQMHHOHNWULþQLKLQ Measurement of electrical
PDJQHWQLKYHOLþLQ and magnetic quantities
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

NORME CEI
INTERNATIONALE IEC
51-4
INTERNATIONAL
Quatrième édition
STAN DARD
Fourth edition
Appareils mesureurs électriques indicateurs
analogiques à action directe et
leurs accessoires
Quatrième partie:
Prescriptions particulières pour les fréquencemètres
Direct acting indicating analogue electrical
measuring instruments and their accessories
Part 4:
Special requirements for frequency meters
© CEI 1984 Droits de reproduction réservés —
Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized
utilisée sous quelque forme que ce soit et par aucun procédé, in any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission
microfilms, sans l'accord écrit de l'éditeur. in writing from the publisher
Bureau central de la Commission Electrotechnique Internationale 3, we de Varembé Suisse
Genève
Commission Electrotechnique Internationale CODE PRIX
J
International Electrotechnical Commission PRICE CODE
IEC
MeniAYHapoAHasi 3fleKTpoTexHH4eCHaR HOMHCCHA
Pour prix, voir catalogue en vigueur
•
For price, see current catalogue

51-4 © IEC 1984 — 3 —
CONTENTS
Page
FOREWORD
PREFACE
Clause
1. Scope 7
2. Definitions
3. Description, classification and compliance 7
4. Reference conditions and intrinsic errors 7
5. Nominal range of use and va riations 9
Further electrical and mechanical requirements 6.
7. Constructional requirements
8. Information, general markings and symbols
9. Markings and symbols for terminals
10. Tests to prove compliance with this standard

51-4 IEC 1984 — 5 —
INTERNATIONAL ELECTROTECHNICAL COMMISSION
DIRECT ACTING INDICATING ANALOGUE ELECTRICAL MEASURING
INSTRUMENTS AND THEIR ACCESSORIES
Part 4: Special requirements for frequency meters
FOREWORD
I) The formal decisions or agreements of the IEC on technical matters, prepared by Technical Committees on which all the National
Committees having a special interest therein are represented, express, as nearly as possible, an inte rnational consensus of opinion
on the subjects dealt with.
ational use and they are accepted by the National Committees in that
2) They have the form of recommendations for inte rn
sense.
3) In order to promote inte rnational unification, the IEC expresses the wish that all National Committees should adopt the text of
the IEC recommendation for their national rules in so far as national conditions will permit. Any divergence between the I E C
recommendation and the corresponding national rules should, as far as possible, be clearly indicated in the latter.
PREFACE
This standard has been prepared by I EC Technical Committee No. 85: Measuring Equipment for Basic Electrical Quantities
(former Sub-Committee 13B: Electrical Measuring Instruments).
This fourth edition replaces the third edition of I EC Publication 51.
This standard constitutes Part 4.
The general layout for the revised Publication 51 is as follows:
rts.
Pa 1: Definitions and General Requirements Common to all Pa
rt
Part 2: Special Requirements for Ammeters and Voltmeters.
Part 3: Special Requirements for Wattmeters and Varmeters.
Part 4: Special Requirements for Frequency Meters.
Part 5: Special requirements for Phase Meters, Power Factor Meters and Synchroscopes.
Part 6: Special Requirements for Ohmmeters (Impedance Meters) and Conductance Meters.
Part 7: Special Requirements for Multi-function Instruments.
Part 8: Special Requirements for Accessories.
Part 9: Recommended Test Methods.
s 2 to 9 are not complete in themselves and shall be read in conjunction with Pa rt 1.
Part
All of these parts are arranged in the same format and a standard relationship between subject and clause number is maintained
rt number in order to differentiate the pa rts. This
throughout. In addition, tables, figures and appendices add a suffix to the pa
re-arrangement will assist the reader of I EC Publication 51 to distinguish information relating to the different types of instru-
ments.
The text of this standard is based upon the following documents:
Six Months' Rule Report on Voting
13B(CO)87 13B(CO)96
Further information can be found in the Repo rt on Voting indicated in the table above.

51-4 © IEC 1984 — 7 —
DIRECT ACTING INDICATING ANALOGUE ELECTRICAL MEASURING
INSTRUMENTS AND THEIR ACCESSORIES
Part 4: Special requirements for frequency meters
1. Scope
1.1 Part
4 of the standard applies to direct acting indicating analogue frequency meters.
1.2 This part
also applies to non-interchangeable accessories (as defined in Sub-clause 2.1.15.3 of Part 1)
used with frequency meters.
1.3 This sub-clause of Part 1 does not apply to frequency meters.
1.4 to 1.8 See Part 1.
2. Definitions
See Part 1.
3. Description, classification and compliance
3.1 Description
Frequency meters shall be described as:
3.1.1 Pointer-type frequency meters, or
3.1.2 Vibrating-reed frequency meters.
3.2 Classification
Frequency meters shall be classified in one of the accuracy classes denoted by the following class
indices:
0.05, 0.1, 0.15, 0.2, 0.3, 0.5, 1, 1.5, 2, 2.5, 5.
3.3 Compliance with the requirements of this standard
1.
See Part
4. Reference conditions and intrinsic errors
4.1 Reference conditions
See Part 1 and Table I-4.
51-4 © IEC 1984 — 9 —
TABLE I-4
Reference condition and tolerance, additional to those
given in Table I-1, for testing purposes
Tolerance permitted
Influence Reference condition
quantity unless otherwise marked for testing purposes')
Voltage of a.c. measured quantity Rated voltage or any voltage ±2% of the rated value
within the reference range
(if any)
') For a reference ra
...