iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 50290-2-36:2016

(Main)

Communication cables - Part 2-36: Common design rules and construction - Crosslinked Silicone rubber insulation compound

Communication cables - Part 2-36: Common design rules and construction - Crosslinked Silicone rubber insulation compound

This Part 2-36 of EN 50290 gives specific requirements for crosslinked Silicone rubber compound (SiR) to be used for the insulation of fire resistant cables. It is essential to read this European Standard in conjunction with Part 2-20 of EN 50290 and other applicable product standards. Using raw material and type test data as outlined in this standard, the raw material supplier will have sufficient data to demonstrate compliance and warrant that the material is suitable for the specified application. This part 2-36 of EN 50290 describes the compound type as given in Table 1.

Kommunikationskabel - Teil 2-36: Gemeinsame Regeln für Entwicklung und Konstruktion - Vernetzte Silikongummi-Isoliermischung

Dieser Teil 2-36 der EN 50290 legt spezifische Anforderungen für vernetzte Silikongummi-Isoliermischungen für die Isolierung von flammwidrigen Kabeln fest. Diese Europäische Norm ist zusammen mit EN 50290-2 20, den Produktnormen EN 50288-7, EN 61158 und anderen zutreffenden Produktnormen zu lesen. Die Verwendung der Prüfwerte der Rohstoffe und der Daten von Typprüfungen wie in dieser Norm beschrieben, stellt dem Lieferanten der Rohstoffe ausreichende Daten zur Verfügung, um die Nachweise der Übereinstimmung mit den Anforderungen zu erbringen und um zu garantieren, dass das Material für die festgelegte Anwendung geeignet ist. Dieser Teil 2-36 der EN 50290 beschreibt die Mischungstypen nach Tabelle 1.

Câbles de communication - Partie 2-36: Règles de conception communes et construction - Mélange de caoutchouc silicone réticulé pour enveloppes isolantes

La présente partie 2-36 de l'EN 50290 fournit les exigences spécifiques relatives au mélange de caoutchouc silicone (SiR: Silicone Rubber) réticulé destiné à être utilisé pour l'isolation des câbles résistants au feu. Il est indispensable de lire la présente Norme européenne conjointement avec la Partie 2-20 de l'EN 50290 et d'autres normes de produit applicables. En utilisant les données relatives aux matières premières et aux essais de type, telles qu'énoncées dans la présente norme, le fournisseur de matières premières dispose de données suffisantes pour en démontrer la conformité et garantir que le matériau convient pour l'application spécifiée. La présente partie 2-36 de l'EN 50290 décrit le type de mélange donné dans le Tableau 1.

Komunikacijski kabli - 2-36. del: Skupna pravila za snovanje in konstruiranje - Izolacijska zmes iz zamrežene silikonske gume

Ta del 2-36 standarda EN 50290 podaja posebne zahteve za zmes iz zamrežene silikonske gume
(SiR), ki se uporablja za izolacijo ognjevzdržnih kablov.
Pomembno je, da se ta evropski standard bere v povezavi z delom 2-20 standarda EN 50290 in drugimi
veljavnimi standardi za proizvode.
Z uporabo podatkov o surovini in tipskem preskušanju, kot je opisano v tem standardu, bo imel dobavitelj surovine
dovolj podatkov, da dokaže skladnost in jamči, da je material ustrezen za opredeljeno
uporabo.

General Information

Status
Published
Publication Date
18-Aug-2016
ICS
29.035.20 - Plastics and rubber insulating materials
33.120.10 - Coaxial cables. Waveguides
Technical Committee
CLC/TC 46X - Communication cables
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
26-May-2021
Ref Project
SIST EN 50290-2-36:2016 - Communication cables - Part 2-36: Common design rules and construction - Crosslinked Silicone rubber insulation compound

Buy Standard

EN 50290-2-36:2016 - BARVEEN 50290-2-36:2016 - BARVE
PreviousNext
Standard
EN 50290-2-36:2016 - BARVE
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50290-2-36:2016
01-oktober-2016
Komunikacijski kabli - 2-36. del: Skupna pravila za snovanje in konstruiranje -
Izolacijska zmes iz zamrežene silikonske gume
Communication cables - Part 2-36: Common design rules and construction - Crosslinked
Silicone rubber insulation compound
Câbles de communication - Partie 2-36: Règles de conception communes et construction
- Mélange de caoutchouc silicone réticulé pour enveloppes isolantes
Ta slovenski standard je istoveten z: EN 50290-2-36:2016
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
SIST EN 50290-2-36:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50290-2-36:2016

---------------------- Page: 2 ----------------------

SIST EN 50290-2-36:2016

EUROPEAN STANDARD EN 50290-2-36

NORME EUROPÉENNE

EUROPÄISCHE NORM
August 2016
ICS 33.120.10; 29.035.20
English Version
Communication cables - Part 2-36: Common design rules and
construction - Crosslinked Silicone rubber insulation compound
Câbles de communication - Partie 2-36: Règles de Kommunikationskabel - Teil 2-36: Gemeinsame Regeln für
conception communes et construction - Mélange de Entwicklung und Konstruktion - Vernetzte Silikongummi-
caoutchouc silicone réticulé pour enveloppes isolantes Isoliermischung
This European Standard was approved by CENELEC on 2016-07-22. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 50290-2-36:2016 E

---------------------- Page: 3 ----------------------

SIST EN 50290-2-36:2016
EN 50290-2-36:2016 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references. 4
3 Compound test requirements . 4
4 Cable test requirements . 5
5 Health, Safety and Environmental (HSE) Regulations . 5

2

---------------------- Page: 4 ----------------------

SIST EN 50290-2-36:2016
EN 50290-2-36:2016 (E)

European foreword
This document (EN 50290-2-36:2016) has been prepared by CLC/TC 46X, "Communication cables".
The following dates are fixed:
• latest date by which this document has (dop) 2017-07-22
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2019-07-22
standards conflicting with this
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
3

---------------------- Page: 5 ----------------------

SIST EN 50290-2-36:2016
EN 50290-2-36:2016 (E)
1 Scope
This Part 2-36 of EN 50290 gives specific requirements for crosslinked Silicone rubber compound
(SiR) to be used for the insulation of fire resista
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 50290-2-24:2021(Main)
Communication cables - Part 2-24: Common design rules and construction - Polyethylene sheathing compounds
SIST EN 50290-2-24:2021

This document gives specific requirements for halogen free polyolefin based sheathing compounds used for halogen free communication cables with improved characteristics in the case of fire. Compounds, described by this document, are commonly also named HFFR or HFFR-LS (halogen free, flame/fire retardant, low smoke), see also EN 50290 2 20. It is expected to be read in conjunction with EN 50290 2 20, the product standards EN 50288 series, EN 60794 series and other applicable product standards. Improved characteristics in the case of fire are demonstrated by specific fire tests on cables for flame/fire retardant applications (e.g. single or bunched cable fire test). Additional tests to prove the characteristics in case of fire, e.g. such as smoke emission test, might also be part of the dedicated product standard or specification. This document describes the compound types as given in Table 1. Table 1 — Sheathing compounds Compound grades Max. operating temperature Comment Type 1 70°C thermoplastic standard Type 2 90°C thermoplastic, higher temperature Type 3 90°C crosslinked, higher temperature

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50290-2-27:2021(Main)
Communication cables - Part 2-27: Common design rules and construction - Halogen free polyolefin based sheathing compounds for cables having improved flame and fire properties (HFFR)
SIST EN 50290-2-27:2021

This document gives specific requirements for halogen free polyolefin based sheathing compounds used for halogen free communication cables with improved characteristics in the case of fire. Compounds, described by this document, are commonly also named HFFR or HFFR-LS (halogen free, flame/fire retardant, low smoke), see also EN 50290 2 20. It is expected to be read in conjunction with EN 50290 2 20, the product standards EN 50288 series, EN 60794 series and other applicable product standards. Improved characteristics in the case of fire are demonstrated by specific fire tests on cables for flame/fire retardant applications (e.g. single or bunched cable fire test). Additional tests to prove the characteristics in case of fire, e.g. such as smoke emission test, might also be part of the dedicated product standard or specification. This document describes the compound types as given in Table 1. Table 1 — Sheathing compounds Compound grades Max. operating temperature Comment Type 1 70°C thermoplastic standard Type 2 90°C thermoplastic, higher temperature Type 3 90°C crosslinked, higher temperature

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50290-2-20:2016(Main)
Communication cables - Part 2-20: Common design rules and construction - General
SIST EN 50290-2-20:2016

EN 50290-2-NN contains, in its various parts, the requirements for polymeric insulating, sheathing and covering materials that are used for metallic and optical fibre cables (Table 1). The materials to be used for EN standardised communication cables are not, and will not be, restricted only to those defined (Table 1). New materials for cables will be described in further parts of the series. The current structure of the EN 50290-2-NN series is outlined in Annex A. Furthermore, the use of materials described in the EN 50290-2-NN series for other cable applications outside those defined (Table 1) is not prohibited, but it is strongly recommended that expert advice be taken before such use, or before any proposal for incorporation into another standard.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50290-2-29:2016(Main)
Communication cables - Part 2-29: Common design rules and construction - Crosslinked polyethylene insulation compounds: instrumentation, control and field bus cables
SIST EN 50290-2-29:2016

This Part 2-29 of EN 50290 gives specific requirements for Crosslinked Polyethylene (XLPE) compounds to be used for the insulation of instrumentation, control and field bus cables. There are several routes used for manufacture of XLPE insulated cables and as a consequence a number of different types of polyethylene compound may be specified. The compounds required for the different manufacturing processes are described (Table 1). The unstabilised materials require antioxidant to be added during the cable extrusion process.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50290-2-35:2016(Main)
Communication cables - Part 2-35: Common design rules and construction - Polyamide sheathing compound
SIST EN 50290-2-35:2016

This Part 2-35 of EN 50290 gives specific requirements for Polyamide and Polyamide alloys to be used for the inner and outer sheathing of cables. It is to be read in conjunction with Part 2-20 of EN 50290, the product standards EN 50288-7 and EN 61158 and other applicable product standards. Using raw material and type test data as outlined in this standard, the raw material supplier will have sufficient data to demonstrate compliance and warrant that the material is suitable for the specified application.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50290-2-38:2016(Main)
Communication cables - Part 2-38: Common design rules and construction - Polypropylene insulation for coaxial cables
SIST EN 50290-2-38:2016

This Part 2-38 of EN 50290 gives specific requirements for PP compounds to be used for the insulation of coaxial cables. It is to be read in conjunction with EN 50290-2-20, EN 50117 and other applicable product standards. Grades PP-S1 and PP-F1 correspond to materials specified in the previous version 50290 2-25. These relatively soft Polypropylene compounds have good low temperature properties and are highly stabilised. Grades PP-S2 and PP-F2 exhibit properties more typical of Polypropylene and are designed for general Coax applications where high crush resistance and superior dielectric properties are needed. Using raw material and type test data as outlined in this standard, the raw material supplier will have sufficient data to demonstrate compliance and warrant that the material is suitable for the specified application.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50290-2-37:2016(Main)
Communication cables - Part 2-37: Common design rules and construction - Polyethylene insulation for coaxial cables
SIST EN 50290-2-37:2016

This Part 2-37 of EN 50290 gives specific requirements for PE compounds to be used for the insulation of coaxial cables. It is to be read in conjunction with EN 50290-2-20, EN 50117 and other applicable product standards. Using raw material and type test data as outlined in this standard, the raw material supplier will have sufficient data to demonstrate compliance and warrant that the material is suitable for the specified application.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50290-2-21:2001/A1:2007/AC:2016(Corrigendum)
Communication cables - Part 2-21: Common design rules and construction - PVC insulation compounds
SIST EN 50290-2-21:2002/A1:2008/AC:2016

TC origin - moving position of a footnote in Table
No xml version as the mother standard is from 2001 (SV on 2016-02-05).

  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50290-2-23:2013(Main)
Communication cables - Part 2-23: Common design rules and construction - Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables
SIST EN 50290-2-23:2014

This European Standard gives specific requirements for PE compounds to be used for the insulation of telephone wire for external plant. Using raw material and type test data as outlined in this standard, the raw material supplier will have sufficient data to demonstrate compliance and warrant that the material is suitable for the specified application.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50290-2-25:2013(Main)
Communication cables - Part 2-25: Common design rules and construction - Polypropylene insulation compounds
SIST EN 50290-2-25:2014

This European Standard gives specific requirements for PP compounds to be used for multi-element metallic data cables for indoor application. Type 1 is typically a copolymer with better low temperature properties. Type 2 is typically a homopolymer with superior hardness giving better crush resistance. Using compound and type test data as outlined in this standard, the compound supplier will have sufficient data to demonstrate compliance and warrant that the material is suitable for the specified application.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day