EN 61784-5-4:2012

Industrial communication networks - Profiles - Part 5-4: Installation of fieldbuses - Installation profiles for CPF 4

IEC 61784-5-4:2010 specifies the installation profiles for CPF 4 (P-NET). The installation profiles are specified in the annexes. These annexes are read in conjunction with IEC 61918:2010. This bilingual version (2012-02) corresponds to the monolingual English version, published in 2010-07. This publication is to be read in conjunction with IEC 61918:2010.

Industrielle Kommunikationsnetze - Profile - Teil 5-4: Feldbusinstallation - Installationsprofile für die Kommunikationsprofilfamilie 4

Réseaux de communication industriels - Profils - Partie 5-4: Installation des bus de terrain - Profils d'installation pour CPF 4

La CEI 61784-5-4:2010 définit les profils d'installation pour la CPF 4 (P-NET). Les profils d'installation sont spécifiés dans les annexes. Ces annexes sont utilisées conjointement à la CEI 61918:2010. La présente version bilingue (2012-02) correspond à la version anglaise monolingue publiée en 2010-07. Cette publication doit être lue conjointement avec la CEI 61918:2010.

Industrijska komunikacijska omrežja - Profili - 5-4. del: Inštalacija procesnih vodil - Inštalacijski profili za CPF 4 (IEC 61784-5-4:2010)

Krmiljenje procesa, samodejni krmilni sistemi, industrijska komunikacijska omrežja, računalniška omrežja, posredovanje podatkov, obdelava podatkov, prenos podatkov, omrežja z vodilom, omrežja fieldbus, vmesniki (obdelava podatkov), medsebojno povezovanje odprtih sistemov.

General Information

• Status: Published
• Publication Date: 19-Apr-2012
• Withdrawal Date: 18-Oct-2014
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100.40 - Transport layer
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65C - IEC_SC_65C
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 20-Apr-2012
• Completion Date: 20-Apr-2012
• Ref Project: SIST EN 61784-5-4:2012 - Industrial communication networks - Profiles - Part 5-4: Installation of fieldbuses - Installation profiles for CPF 4 (IEC 61784-5-4:2010)

Relations

• Amended By: EN 61784-5-4:2012/A1:2015 - Industrial communication networks - Profiles - Part 5-4: Installation of fieldbuses - Installation profiles for CPF 4
• Effective Date: 07-Jul-2015

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61784-5-4:2012
01-junij-2012
Industrijska komunikacijska omrežja - Profili - 5-4. del: Inštalacija procesnih vodil -
Inštalacijski profili za CPF 4 (IEC 61784-5-4:2010)
Industrial communication networks - Profiles - Part 5-4: Installation of fieldbuses -
Installation profiles for CPF 4 (IEC 61784-5-4:2010)
Industrielle Kommunikationsnetze - Profile - Teil 5-4: Feldbusinstallation -
Installationsprofile für die Kommunikationsprofilfamilie 4 (IEC 61784-5-4:2010)
Réseaux de communication industriels - Profils - Partie 5-4: Installation des bus de
terrain - Profils d'installation pour CPF 4 (CEI 61784-5-4:2010)
Ta slovenski standard je istoveten z: EN 61784-5-4:2012
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.05 9HþVORMQHXSRUDEQLãNH Multilayer applications
UHãLWYH
SIST EN 61784-5-4:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61784-5-4:2012

---------------------- Page: 2 ----------------------

SIST EN 61784-5-4:2012

EUROPEAN STANDARD
EN 61784-5-4

NORME EUROPÉENNE
April 2012
EUROPÄISCHE NORM

ICS 25.040.40; 35.100.40


English version


Industrial communication networks -
Profiles -
Part 5-4: Installation of fieldbuses -
Installation profiles for CPF 4
(IEC 61784-5-4:2010)


Réseaux de communication industriels -  Industrielle Kommunikationsnetze -
Profils - Profile -
Partie 5-4: Installation des bus de terrain - Teil 5-4: Feldbusinstallation -
Profils d'installation pour CPF 4 Installationsprofile für die
(CEI 61784-5-4:2010) Kommunikationsprofilfamilie 4
(IEC 61784-5-4:2010)





This European Standard was approved by CENELEC on 2011-10-19. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61784-5-4:2012 E

---------------------- Page: 3 ----------------------

SIST EN 61784-5-4:2012
EN 61784-5-4:2012 - 2 -

Foreword
The text of document 65C/602/FDIS, future edition 1 of IEC 61784-5-4, prepared by SC 65C, "Industrial
networks", of IEC/TC 65, "Industrial-process measurement, control and automation" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61784-5-4:2012.

The following dates are fixed:
(dop) 2012-10-20
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2014-10-19

standards conflicting with the
document have to be withdrawn

This standard is to be used in conjunction with IEC 61918, second edition (2010-07), together with the
European Common Modification published with EN 61918:2008.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.

Endorsement notice
The text of the International Standard IEC 61784-5-4:2010 was approved by CENELEC as a European
Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 61784-5-4:2012
- 3 - EN 61784-5-4:2012
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest editio
...