EN 62074-1:2009

Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification

Superseded by EN 62074-1:2014

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Lichtwellenleiter-WDM-Bauteile - Teil 1: Fachgrundspezifikation

Dispositifs d'interconnexion et dispositifs passifs à fibres optiques - Dispositifs WDM à fibres optiques - Partie 1: Spécification générique

Optični spojni elementi in pasivne komponente - Optični elementi za WDM (valovni multipleks) - 1. del: Rodovna specifikacija (IEC 62074-1:2009)

Ta del IEC 62074 velja za multipleksne delitve valovnih dolžin naprav (WDM naprave), ki uporabljajo optična vlakna.  Le-te imajo vse od naslednjih splošnih značilnosti: - So pasivne, saj ne vsebujejo nobenih optoelektronskih ali drugih pretvorniških elementov; lahko pa uporabljajo nadzor temperature samo z namenom stabiliziranja značilnosti naprav; nimajo nikakršne funkcije optičnega preklopa. - Imajo tri ali več priključnih odprtin za vstop in/ali izstop optične moči; optična moč se deli med te priključne odprtine na vnaprej določen način, v odvisnosti od valovne dolžine. - Te priključne odprtine so optična vlakna ali konektorji optičnih vlaken. Ta standard vzpostavlja enotne zahteve za optične, mehanične in okoljske lastnosti.

General Information

• Status: Withdrawn
• Publication Date: 05-Nov-2009
• Withdrawal Date: 30-Sep-2012
• ICS: 33.180.01 - Fibre optic systems in general
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Parallel Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 13-Mar-2015
• Ref Project: SIST EN 62074-1:2010 - Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification (IEC 62074-1:2009)

Relations

• Replaced By: EN 62074-1:2014 - Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2010
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH2SWLþQLHOHPHQWL]D:'0YDORYQL
PXOWLSOHNVGHO5RGRYQDVSHFLILNDFLMD,(&
Fibre optic interconnecting devices and passive components - Fibre optic WDM devices
- Part 1: Generic specification (IEC 62074-1:2009)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Lichtwellenleiter-WDM-
Bauteile -- Teil 1: Fachgrundspezifikation (IEC 62074-1:2009)
Dispositifs d'interconnexion et dispositifs passifs à fibres optiques - Dispositifs WDM à
fibres optiques - Partie 1: Spécification générique (CEI 62074-1:2009)
Ta slovenski standard je istoveten z: EN 62074-1:2009
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 62074-1
NORME EUROPÉENNE
November 2009
EUROPÄISCHE NORM
ICS 33.180.01; 33.180.20
English version
Fibre optic interconnecting devices and passive components -
Fibre optic WDM devices -
Part 1: Generic specification
(IEC 62074-1:2009)
Dispositifs d'interconnexion  Lichtwellenleiter -
et dispositifs passifs à fibres optiques - Verbindungselemente
Dispositifs WDM à fibres optiques - und passive Bauteile -
Partie 1: Spécification générique Lichtwellenleiter-WDM-Bauteile -
(CEI 62074-1:2009) Teil 1: Fachgrundspezifikation
(IEC 62074-1:2009)
This European Standard was approved by CENELEC on 2009-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels

© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62074-1:2009 E
Foreword
The text of document 86B/2850/FDIS, future edition 1 of IEC 62074-1, prepared by SC 86B, Fibre optic
interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 62074-1 on 2009-10-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-10-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62074-1:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61300-1 NOTE  Harmonized as EN 61300-1:2003 (not modified).
IEC 61300-2 NOTE  Harmonized in EN 61300-2 series (not modified).
IEC 61300-3 NOTE  Harmonized in EN 61300-3 series (not modified).
__________
- 3 - EN 62074-1:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60027 Series Letter symbols to be used in electrical EN 60027 Series
technology
1)
IEC 60050-731 - International Electrotechnical Vocabulary - -
(IEV) -
Chapter 731: Optical fibre communication

IEC 60617 Data- Graphical symbols for diagrams - -
base
1) 2)
IEC 60695-11-5 - Fire hazard testing - EN 60695-11-5 2005
Part 11-5: Test flames - Needle-flame test
method - Apparatus, confirmatory test
arrangement and guidance
IEC 60825 Series Safety of laser products EN 60825 Series

1)
ISO 129-1 - Technical drawings - Indication of dimensions - -
and tolerances -
Part 1: General principles
1) 2)
ISO 286-1 - ISO system of limits and fits - EN 20286-1 1993
Part 1: Bases of tolerances, deviations and fits

1)
ISO 370 - Toleranced dimensions - Conversion from - -
inches into millimetres and vice versa

1) 2)
ISO 1101 - Geometrical Product Specifications (GPS) - EN ISO 1101 2005
Geometrical tolerancing - Tolerances of form,
orientation, location and run-out

1)
ISO 8601 - Data elements and interchange formats - - -
Information interchange - Representation of
dates and times
ITU-T 2005 Transmission characteristics of optical - -
Recommendation components and subsystems
G.671
ITU-T 1998 Optical interfaces for multichannel systems - -
Recommendation with optical amplifiers
G.692
1)
Undated reference.
2)
Valid edition at date of issue.

IEC 62074-1 ®
Edition 1.0 2009-07
INTERNATIONAL
STANDARD
Fibre optic interconnecting devices and passive components – Fibre optic WDM
devices –
Part 1: Generic specification
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
W
ICS 33.180.01; 33.180.20 ISBN 2-8318-1051-5
– 2 – 62074-1 © IEC:2009(E)
CONTENTS
FOREWORD.4
1 Scope.6
2 Normative references.6
3 Terms and definitions .7
3.1 Basic term definitions .7
3.2 Component definitions .8
3.3 Performance parameter definitions .9
4 Requirements .22
4.1 Classification.22
4.1.1 General .22
4.1.2 Type .22
4.1.3 Style .22
4.1.4 Variant.23
4.1.5 Assessment level.23
4.1.6 Normative reference extension.24
4.2 Documentation .24
4.2.1 Symbols.24
4.2.2 Specification system .24
4.2.3 Drawings .25
4.2.4 Measurements .25
4.2.5 Test data sheets .26
4.2.6 Instructions for use .26
4.3 Standardization system.26
4.3.1 Performance standards.26
4.3.2 Reliability standard .26
4.3.3 Interlinking.27
4.4 Design and construction .28
4.4.1 Materials.28
4.4.2 Workmanship .28
4.5 Performance requirements.28
4.6 Identification and marking.28
4.6.1 General .28
4.6.2 Variant identification number.28
4.6.3 Component marking.28
4.6.4 Package marking .29
4.7 Safety.29
Annex A (informative) Transfer matrix .30
Annex B (informative) Examples of fibre optic WDM device types .33
Bibliography .38

Figure 1 – Example of a six-port device, with two-input and four-output ports.8
Figure 2 – Illustration of adjacent channel isolation.10
Figure 3 – Illustration of a four-wavelength bidirectional system .11
Figure 4 – Illustration of channel insertion loss variation .12
Figure 5 – Illustration of free spectral range.13

62074-1 © IEC:2009(E) – 3 –
Figure 6 – Illustration of insertion loss .14
Figure 7 – Illustration of minimum and maximum insertion loss.14
Figure 8 – Illustration of isolation wavelength.15
Figure 9 – Illustration of isolation wavelength range.15
Figure 10 – Illustration of maximum adjacent channel isolation .16
Figure 11 – Illustration of non-adjacent channel isolation .17
Figure 12 – Illustration of operating wavelength .17
Figure 13 – Illustration of operating wavelength range .18
Figure 14– Illustration of polarisation dependent centre wavelength (PDCW) .19
Figure 15 – Illustration of ripple (a) at the band edges and (b) in-band. .20
Figure 16 – Illustration of X-dB bandwidth.21
Figure 17 – Wavelength-selective branching device.22
Figure 18 – Wavelength-selective branching device.23
Figure 19 – Wavelength-selective branching device.23
Figure 20 – Wavelength-selective branching device.23
Figure A.1 – Example of a six-port device, with two-input and four-output ports.30
Figure A.2 – Illustration of transfer matrix coefficient .31
Figure B.1 – Example of a wavelength multiplexer .33
Figure B.2 – Example of a wavelength demultiplexer .34
Figure B.3 – Example of a wavelength multiplexer/demultiplexer.34
Figure B.4 – Example of a wavelength router.
...