iTeh Standards logo
EURUSD
Your shopping cart is empty.
CLC

EN 61481-1:2014/AC:2015-09

(Corrigendum)

Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.

Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.

Arbeiten unter Spannung - Phasenvergleicher - Teil 1: Kapazitive Ausführung für Wechselspannungen über 1 kV

Travaux sous tension - Comparateurs de phase - Partie 1: Type capacitif pour usage sur des tensions alternatives de plus de 1 kV

Delo pod napetostjo - Fazni primerjalniki - 1. del: Kapacitivne vrste za izmenične napetosti nad 1 kV (IEC 61481-1:2014) - Popravek AC

General Information

Status
Published
Publication Date
24-Sep-2015
ICS
13.260 - Protection against electric shock. Live working
29.240 - Power transmission and distribution networks
29.260.99 - Other electrical equipment for working in special conditions
Technical Committee
CLC/TC 78 - Equipment and tools for live working
Drafting Committee
CLC/TC 78 - Equipment and tools for live working
Current Stage
6060 - Document made available - Publishing
Start Date
25-Sep-2015
Completion Date
25-Sep-2015
Ref Project
SIST EN 61481-1:2015/AC:2018 - Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.

Relations

Corrects
EN 61481-1:2014 - Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
Effective Date
04-Aug-2015
EN 61481-1:2015/AC:2018EN 61481-1:2015/AC:2018
PreviousNext
Corrigendum
EN 61481-1:2015/AC:2018
English and French language
1 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Arbeiten unter Spannung - Phasenvergleicher - Teil 1: Kapazitive Ausführung für Wechselspannungen über 1 kVTravaux sous tension - Comparateurs de phase - Partie 1: Type capacitif pour usage sur des tensions alternatives de plus de 1 kVLive working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.17.220.20Measurement of electrical and magnetic quantities13.260Protection against electric shock. Live workingICS:Ta slovenski standard je istoveten z:EN 61481-1:2014/AC:2015-09SIST EN 61481-1:2015/AC:2018en,fr01-oktober-2018SIST EN 61481-1:2015/AC:2018SLOVENSKI
STANDARD
IEC 61481-1:2014/COR1:2015 – 1 –
 IEC 2015 INTERNATIONAL ELECTROTE
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

CLC
EN IEC 60895:2020(Main)
Live working - Conductive clothing
SIST EN IEC 60895:2020

IEC 60895:2020 is applicable to conductive clothing, worn during live working (especially bare-hand working) on AC and DC electrical installations, to provide electrical continuity between all parts of the clothing and a reduction of electric field inside the clothing. This document is applicable to conductive clothing assembled from a conductive garment (jackets and trousers or coveralls forming a one-piece garment) and from conductive component parts (gloves, hoods or helmets, shoes or boots, overshoe socks and socks) in electrical systems with nominal voltage up to 1 000 kV AC and up to ±800 kV DC. This document does not indicate values of protection from the effects of the electric arc, because any value indicated would not guarantee the necessary protection from the effects of electric arcs, or the operator would need to wear very heavy and rigid conductive clothing, which would not allow the execution of the work in safety. The products designed and manufactured according to this document contribute to the safety of the users provided they are used by persons trained for the work, in accordance with the live working methods and the instructions for use. This third edition cancels and replaces the second edition, published in 2002. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) increase of the use up to 1 000 kV AC and ±800 kV DC; b) introduction of two classes of conductive clothing with different electrical requirements; c) revision of the electrical requirements of conductive clothing; d) definition of specific resistance values for each component part of the conductive clothing; e) introduction of conductive helmet and conductive scarf as component parts of conductive clothing; f) introduction of mechanical requirements and new tests for fabrics; g) update of the cleaning test procedures; h) revision of the efficiency test of the conductive clothing to improve the feasibility and repeatability; i) preparation of the elements of classification of defects, and general application of IEC 61318:2007; j) the normative Annex B for the classification of tests has been replaced by normative Annex C for the general type tests procedure, the normative Annex D for the classification of defects and the informative Annex E providing the justification for the classification of defects; k) the normative Annex C on sampling procedure has been deleted (not applicable according to IEC 61318:2007); l) modification of the recommended frequency of the periodic tests.

  • Standard
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61478:2001/A1:2003(Amendment)
Live working - Ladders of insulating material
SIST EN 61478:2004/A1:2004
  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61243-2:1997/A2:2002(Amendment)
Live working - Voltage detectors - Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c.
SIST EN 61243-2:2000/A2:2003

EN following parallel vote

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61479:2001/A1:2002(Amendment)
Live working - Flexible conductor covers (line hoses) of insulating material
SIST EN 61479:2002/A1:2003

EN following parallel vote

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61478:2001(Main)
Live working - Ladders of insulating material
SIST EN 61478:2004

Is applicable to fully insulating spliced or hook ladders with extension or having a combination of insulating and conductive sections and used for live working on a.c. or d.c. electrical installations at 1 000 V and above for a.c. and 1 500 V and above for d.c. This standard concerns only ladders made of synthetic material. These ladders are used, to provide access, generally on overhead line structures and to facilitate live working, either hot stick, barehanded or a combination of both.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61000-4-30:2025(Main)
Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods
kSIST FprEN IEC 61000-4-30:2025

IEC 61000-4-30:2025 defines the methods for measurement and interpretation of results for power quality parameters in AC power supply systems with a declared fundamental frequency of 50 Hz or 60 Hz. Measurement methods are described for each relevant parameter in terms that give reliable and repeatable results, regardless of the method’s implementation. This document addresses measurement methods for in-situ measurements. This document covers two classes of measurement methods (Class A and Class S). The classes of measurement are specified in Clause 4. NOTE 1 In this document, “A” stands for “advanced” and “S” stands for “surveys”. Measurement of parameters covered by this document is limited to conducted phenomena in power systems. The power quality parameters considered in this document are power frequency, magnitude of the supply voltage, flicker, supply voltage dips and swells, voltage interruptions, transient voltages, supply voltage unbalance, voltage harmonics and interharmonics, rapid voltage changes, mains communicating system (MCS) voltages, magnitude of current, harmonic currents, interharmonic currents and current unbalance. Emissions in the 2 kHz to 150 kHz range are considered in Annex C and Annex D. Depending on the purpose of the measurement, all or a subset of the phenomena on this list can be measured. NOTE 2 Test methods for verifying compliance with this document can be found in IEC 62586-2. NOTE 3 The effects of transducers inserted between the power system and the instrument are acknowledged but not addressed in detail in this document. Guidance about effects of transducers can be found IEC TR 61869-103. This fourth edition cancels and replaces the third edition published in 2015. This edition constitutes a technical revision.This edition includes the following significant technical changes with respect to the previous edition: a) IEC 61000-4-30:2015/AMD1:2021 and IEC 61000-4-30:2015/COR1:2016 were included. b) The measurement method for rapid voltage changes (RVC) has been corrected and extended. c) The measurement method for voltage events has been updated and extended. d) Annex C was divided into 2 parts: 1) Annex C: The measurement method from IEC 61000-4-7:2002 and IEC 61000‑4‑7:2002/AMD1:2008, Annex B for conducted emissions in the 2 kHz to 9 kHz range has been separate 2) Annex D: A new measurement method for conducted emissions in the 9 kHz to 150 kHz range has been added. e) Annex D (underdeviation and overdeviation parameters) was removed. f) Annex E (Class B) was removed.

  • Draft
    83 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60794-1-207:2025(Main)
Optical fibre cables - Part 1-207: Generic specification - Basic optical cable test procedures - Environmental test methods - Nuclear radiation, Method F7
oSIST prEN IEC 60794-1-207:2024

IEC 60794-1-207:2025 describes test procedures to be used in establishing uniform requirements for optical fibre cables for the environmental property: performance degradation when exposed to nuclear radiation. This document applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. Method F7A evaluates performance degradation of optical fibre cable in environmental background radiation; Method F7B evaluates performance degradation of optical fibre cable in adverse nuclear environments. NOTE Throughout the document, the wording "optical cable" can also include optical fibre units, microduct fibre units, etc. This first edition cancels and replaces the method F7 of the second edition of IEC 60794-1-22 published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) detailed content of sample, apparatus, procedure, requirements and details of the method to be specified and reported are added.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60153-2:2025(Main)
Hollow metallic waveguides - Part 2: Relevant specifications for ordinary rectangular waveguides
kSIST FprEN IEC 60153-2:2025

IEC 60153-2:2025 specifies straight hollow metallic tubing of ordinary rectangular cross-section for use as waveguides in radio frequency electrical applications. The term "ordinary rectangular waveguide" in the title of this document refers to rectangular waveguides with a b-to-a ratio of 0,5 (or slightly less). The objective of this document is to specify for hollow metallic waveguides: a) the details necessary to ensure compatibility and, as far as is essential, interchangeability; b) test methods; c) uniform requirements for the electrical and mechanical properties. This document does not contain any binding specifications for the materials to be used, but merely examples. The exact selection of materials is subject to agreement between the customer and the supplier. This fourth edition cancels and replaces the third edition published in 2016. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) addition of a cross-sectional view of the waveguide; b) addition of informative content on the theoretical background of the standard; c) use of a lower case "k" in the waveguide designation, where appropriate; d) revision of main specification table (now Table 1): 1) two waveguides moved to the end of the table (R 35, R 41); 2) correction of one waveguide designation (now R 26k); 3) correction of one waveguide outside width (R 18); 4) relaxation of tolerances of waveguide outside dimensions (R 14 to R 70); 5) removed attenuation values of waveguides made of gold, aluminium, and stainless steel; 6) implementation of attenuation values for an idealised copper waveguide; e) relaxation of tolerances of waveguide outside dimensions for R 14 to R 70 in the table now referred to as Table 4; f) clarification of the electrical tests: 1) use of standard annealed copper as the reference material for waveguide tubes; 2) correction of the formula for calculating the theoretical attenuation of an idealised copper waveguide; 3) addition of a formula for calculating the theoretical attenuation of waveguides made of any material; 4) addition of an informative table with typical waveguide materials (Table 5); g) addition of an informative cross-reference for waveguide type designations (Annex A).

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61936-1:2021/A11:2025(Amendment)
Power installations exceeding 1 kV AC and 1,5 kV DC - Part 1: AC
SIST EN IEC 61936-1:2021/FprAA:2025

European common modification to EN 61936-1

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60966-2-8:2025(Main)
Radio frequency and coaxial cable assemblies - Part 2-8: Detail specification for cable assemblies for radio and TV receivers - Frequency range up to 3 000 MHz, screening class A++, IEC 61169-47 connectors
oSIST prEN IEC 60966-2-8:2025

IEC 60966-2-8:2025 is available as IEC 60966-2-8:2025 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60966-2-8:2025 is a detail specification that applies to cable assemblies with F-Quick connectors (see IEC 61169-47) and requires quad-shield screening class A++ (see IEC 61196-6-5). This document applies to the cable assemblies for radio and TV receivers. This second edition cancels and replaces the first edition published in 2022. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) in item [5], drawing expanded by right angled connectors; b) in item [12], female F-connectors cancelled (not standardized by IEC 61169-47); c) in item [14] Reflection properties (return loss): different values for straight and right-angled connectors; d) in item [14] Insertion loss: different factors for insertion loss calculation for straight and right-angled connectors; e) in item [14] Loop resistance: loop resistance was set to 1 Ω max. value for the complete length.

  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day