EN 62716:2013
(Main)Photovoltaic (PV) modules - Ammonia corrosion testing
Photovoltaic (PV) modules - Ammonia corrosion testing
IEC 62716:2013 describes test sequences useful to determine the resistance of PV modules to ammonia (NH3). All tests included in the sequences, except the bypass diode functionality test, are fully described in IEC 61215, IEC 61646 and IEC 61730-2. They are combined in this standard to provide means to evaluate possible faults caused in PV modules when operating under wet atmospheres having high concentration of dissolved ammonia (NH3).
Photovoltaische (PV-)Module - Ammoniak-Korrosionsprüfung
Modules photovoltaïques (PV) - Essai de corrosion à l'ammoniac
La CEI 62716:2013 décrit des séquences d'essai pour déterminer la résistance des modules photovoltaïques à la corrosion due à l'ammoniac (NH3). Tous les essais inclus dans les séquences, à l'exception de l'essai de fonctionnalité des diodes de dérivation, sont décrits de façon détaillée dans les CEI 61215, CEI 61646 et CEI 61730-2. Ils sont combinés dans la présente Norme pour fournir des moyens d'évaluer les anomalies possibles causées dans les modules photovoltaïques qui fonctionnement en atmosphères humides avec une forte concentration d'ammoniac dissous (NH3).
Preskušanje fotonapetostnih (PV) modulov na korozijo zaradi amonijaka (IEC 62716:2013)
Fotonapetostni sistemi (PV) so električne naprave, ki so skozi svojo celotno življenjsko dobo stalno izpostavljene zunanjim pogojem. Močno korozivno vlažno okolje, npr. v konjušnicah kmetijskih družb, bi lahko sčasoma povzročilo poslabšanje stanja nekaterih sestavnih delov fotonapetostnih modulov (korozija kovinskih delov, poslabšanje lastnosti nekaterih nekovinskih materialov – kot so zaščitne prevleke in plastika – z vezavo amoniaka itd.), zaradi česar bi nastale trajne poškodbe, ki bi lahko ogrozile varno delovanje. V tem standardu so opisana zaporedja preskusov, ki se uporabljajo za ugotavljanje odpornosti fotonapetostnih modulov proti amoniaku (NH3). Vsi preskusi, vključeni v zaporedja, razen preskusa funkcionalnosti premostitvenih diod, so v celoti opisani v standardih IEC 61215, IEC 61646 in IEC 61730-2. V ta standard so zajeti, da se zagotovi način za ugotavljanje morebitnih okvar, ki nastanejo v fotonapetostnih modulih pri delovanju v vlažnem okolju s koncentracijo raztopljenega amoniaka (NH3). Ta standard se uporablja za ploščate fotonapetostne module. Zasnova tega standarda se zgleduje po standardu IEC 61701.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Preskušanje fotonapetostnih (PV) modulov na korozijo zaradi amonijaka (IEC 62716:2013)Ammoniak-Korrosionsprüfung von photovoltaischen (PV)-ModulenEssai de corrosion à l'ammoniac des modules photovoltaïques (PV)Ammonia corrosion testing of photovoltaic (PV) modules27.160Solar energy engineeringICS:Ta slovenski standard je istoveten z:EN 62716:2013SIST EN 62716:2014en01-junij-2014SIST EN 62716:2014SLOVENSKI
STANDARD
SIST EN 62716:2014
EUROPEAN STANDARD EN 62716 NORME EUROPÉENNE
EUROPÄISCHE NORM August 2013
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62716:2013 E
ICS 27.160
English version
Photovoltaic (PV) modules -
Ammonia corrosion testing (IEC 62716:2013)
Modules photovoltaïques (PV) -
Essai de corrosion à l'ammoniac (CEI 62716:2013)
Photovoltaische (PV-)Module -
Ammoniak-Korrosionsprüfung (IEC 62716:2013)
This European Standard was approved by CENELEC on 2013-08-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 62716:2014
EN 62716:2013 - 2 -
Foreword The text of document 82/769/FDIS, future edition 1 of IEC 62716, prepared by IEC/TC 82 "Solar photovoltaic energy systems" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62716:2013. The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-05-01 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-08-01
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
Endorsement notice The text of the International Standard IEC 62716:2013 was approved by CENELEC as a European Standard without any modification. SIST EN 62716:2014
- 3 - EN 62716:2013
Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 61215 2005 Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification
and type approval EN 61215 2005
IEC 61646 2008 Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval EN 61646 2008
IEC 61730-2 (mod) 2004 Photovoltaic (PV) module safety
qualification -
Part 2: Requirements for construction EN 61730-2 2007
ISO/IEC 17025 - General requirements for the
competence of testing and calibration laboratories EN ISO/IEC 17025 -
ISO 6988 1985 Metallic and other non-organic coatings - Sulfur dioxide test with general
condensation of moisture EN ISO 6988 1994
SIST EN 62716:2014
SIST EN 62716:2014
IEC 62716 Edition 1.0 2013-06 INTERNATIONAL STANDARD NORME INTERNATIONALE Photovoltaic (PV) modules – Ammonia corrosion testing
Modules photovoltaïques (PV) – Essai de corrosion à l'ammoniac
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE M ICS 27.160 PRICE CODE CODE PRIX ISBN 978-2-83220-887-8
® Registered trademark of the International Electro
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.