Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheets 420 to 422: Polyethylene terephthalate textile sleeving with acrylic based coating

Gives the requirements for three types of sleeving constructed from polyethylene terephthalate yarns using either braided or knitted construction, with a continuous acrylic based coating and differentiated by their breakdown voltage: high breakdown voltage (sheet 420), medium breakdown voltage (sheet 421) and low breakdown voltage (sheet 422). Experience of product performance indicates that sleeving of the types specified in these sheets may be suitable for operation at 130 °C or in some applications at temperatures up to 155 °C.

Isolierschläuche - Teil 3: Anforderungen für einzelne Schlauchtypen - Blätter 420 bis 422: PET-Textilschläuche mit Acrylbeschichtung

Gaines isolantes souples - Partie 3: Spécification pour types particuliers de gaines - Feuilles 420 à 422: Gaines en téréphtalate de polyéthylène tissées avec revêtement acrylique

Donne les exigences pour trois types de gaines constituées à partir de fils de polyéthylène de téréphtalate tressés ou tricotés avec un revêtement acrylique continu et différentiées par leur rigidité diélectrique: rigidité diélectrique élevée (feuille 420), rigidité diélectrique moyenne (feuille 421) et rigidité diélectrique faible (feuille 422). L'expérience en matière de performance de produits indique que les gaines des types spécifiés dans ces feuilles peuvent être adaptées au fonctionnement pour des températures à 130 °C et dans certaines applications pour des températures allant jusqu'à 155 °C.

Gibke izolacijske cevi - 3. del: Specifikacije za posamezne tipe cevi - Listi od 420 do 422: Polietilen tereftalat tekstilne cevi z akrilno prevleko (IEC 60684-3-420 to 422:2002)

General Information

Status
Published
Publication Date
25-Jul-2002
Drafting Committee
Parallel Committee
Current Stage
6060 - Document made available
Due Date
26-Jul-2002
Completion Date
26-Jul-2002

RELATIONS

Buy Standard

Standard
EN 60684-3-420 to 422:2004
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI SIST EN 60684-3-420 to
422:2004
STANDARD
september 2004
Gibke izolacijske cevi - 3. del: Specifikacije za posamezne tipe cevi - Listi od

420 do 422: Polietilen tereftalat tekstilne cevi z akrilno prevleko (IEC 60684-3-

420 to 422:2002)

Flexible insulating sleeving - Part 3: Specification for individual types of sleeving -

Sheets 420 to 422: Polyethylene terephthalate textile sleeving with acrylic based

coating (IEC 60684-3-420 to 422:2002)
ICS 29.035.20 Referenčna številka
SIST EN 60684-3-420 to 422:2004(en)

© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 60684-3-420 to 422
NORME EUROPÉENNE
EUROPÄISCHE NORM July 2002
ICS 29.035.20 Supersedes HD 523.3.420 to 422 S1:1993
English version
Flexible insulating sleeving
Part 3: Specification for individual types of sleeving
Sheets 420 to 422: Polyethylene terephthalate textile sleeving
with acrylic based coating
(IEC 60684-3-420 to 422:2002)
Gaines isolantes souples Isolierschläuche
Partie 3: Spécification pour types Teil 3: Anforderungen für
particuliers de gaines einzelne Schlauchtypen
Feuilles 420 à 422: Gaines en Blätter 420 bis 422: PET-Textilschläuche
téréphtalate de polyéthylène tissées mit Acrylbeschichtung
avec revêtement acrylique (IEC 60684-3-420 to 422:2002)
(CEI 60684-3-420 to 422:2002)

This European Standard was approved by CENELEC on 2002-07-01. CENELEC members are bound to

comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on

application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CENELEC member into its own language and

notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,

Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,

Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60684-3-420 to 422:2002 E
---------------------- Page: 2 ----------------------
EN 60684-3-420 to 422:2002 - 2 -
Foreword

The text of document 15C/1350/FDIS, future edition 2 of IEC 60684-3-420 to 422, prepared by

SC 15C, Specifications, of IEC TC 15, Insulating materials, was submitted to the IEC-CENELEC

parallel vote and was approved by CENELEC as EN 60684-3-420 to 422 on 2002-07-01.

This European Standard supersedes HD 523.3.420 to 422 S1:1993.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2005-07-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice

The text of the International Standard IEC 60684-3-420 to 422:2002 was approved by CENELEC as a

European Standard without any modification.
__________
---------------------- Page: 3 ----------------------
- 3 - EN 60684-3-420 to 422:2002
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

This European Standard incorporates by dated or undated reference, provisions from other

publications. These normative references are cited at the appropriate places in the text and the

publications are listed hereafter. For dated references, subsequent amendments to or revisions of any

of these publications apply to this European Standard only when incorporated in it by amendment or

revision. For undated references the latest edition of the publication referred to applies (including

amendments).

NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant

EN/HD applies.
Publication Year Title EN/HD Year
IEC 60684-1 1980 Specification for flexible insulating EN 60684-1 1995
sleeving
Part 1: Definitions and general
requirements
IEC 60684-2 1997 Part 2: Methods of test EN 60684-2 1997
IEC 60757 1983 Code for designation of colours HD 457 S1 1985
---------------------- Page: 4 ----------------------
NORME CEI
INTERNATIONALE IEC
60684-3-420
INTERNATIONAL
à/to 422
STANDARD
Deuxième édition
Second edition
2002-05
Gaines isolantes souples –
Partie 3:
Spécification pour types particuliers de gaines –
Feuilles 420 à 422: Gaines en téréphtalate de
polyéthylène tissées avec revêtement acrylique
Flexible insulating sleeving –
Part 3:
Specification for individual types of sleeving –
Sheets 420 to 422: Polyethylene terephthalate
textile sleeving with acrylic based coating
 IEC 2002 Droits de reproduction réservés  Copyright - all rights reserved

Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any

utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including

électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from

microfilms, sans l'accord écrit de l'éditeur. the publisher.

International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland

Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch

CODE PRIX
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
Международная Электротехническая Комиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue
---------------------- Page: 5 ----------------------
60684-3-420 to 422 © IEC:2002 – 3 –
FLEXIBLE INSULATING SLEEVING –
Part 3: Specification for individual types of sleeving –
Sheets 420 to 422: Polyethylene terephthalate textile sleeving
with acrylic based coating
FOREWORD

1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, the IEC publishes International Standards. Their preparation is

entrusted to technical committees; any IEC National Committee interested in the subject dealt with may

participate in this preparatory work. International, governmental and non-governmental organizations liaising

with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization

for Standardization (ISO) in accordance with conditions determined by agreement between the two

organizations.

2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an

international consensus of opinion on the relevant subjects since each technical committee has representation

from all interested National Committees.

3) The documents produced have the form of recommendations for international use and are published in the form

of standards, technical specifications, technical reports or guides and they are accepted by the National

Committees in that sense.

4) In order to promote international unification, IEC National Committees undertake to apply IEC International

Standards transparently to the maximum extent possible in their national and regional standards. Any

divergence between the IEC Standard and the corresponding national or regional standard shall be clearly

indicated in the latter.
5) The IEC provides no marking procedure to indicate i
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.