Industrial communication networks - Profiles - Part 5-16: Installation of fieldbuses - Installation profiles for CPF 16

IEC 61784-5-16:2013 specifies installation profiles for CPF 16 (SERCOS). Each CP installation profile is specified in a separate part of this series of standards. The IEC 61784 series is produced to facilitate the use of communication networks in industrial control systems. This standard is to be used in conjunction with IEC 61918:2013.

Industrielle Kommunikationsnetze - Profile - Teil 5-16: Feldbusinstallation - Installationsprofile für die Kommunikationsprofilfamilie 16

Réseaux de communication industriels - Profils - Partie 5-16: Installation des bus de terrain - Profils d'installation pour CPF 16

La CEI 61784-5-16:2013 définit les profils d'installation pour la CPF 16 (SERCOS). Chaque profil d'installation de CP est spécifié dans une partie séparée de la présente série de normes. Cette norme fait partie d'une série élaborée pour faciliter l'utilisation des réseaux de communication dans des systèmes de contrôle-commande industriels. La présente norme doit être utilisée conjointement à la CEI 61918:2013.

Industrijska komunikacijska omrežja - Profili - 5-16. del: Inštalacija procesnih vodil - Inštalacijski profili za CPF 16 (IEC 61784-5-16:2013)

General Information

Status
Published
Publication Date
12-Dec-2013
Withdrawal Date
17-Oct-2016
Current Stage
6060 - Document made available - Publishing
Start Date
13-Dec-2013
Completion Date
13-Dec-2013

Buy Standard

Standard
EN 61784-5-16:2014 - BARVE
English language
40 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61784-5-16:2014
01-april-2014
Industrijska komunikacijska omrežja - Profili - 5-16. del: Inštalacija procesnih vodil
- Inštalacijski profili za CPF 16 (IEC 61784-5-16:2013)
Industrial communication networks - Profiles -- Part 5-16: Installation of fieldbuses -
Installation profiles for CPF 16
Industrielle Kommunikationsnetze - Profile -- Teil 5-16: Feldbusinstallation -
Installationsprofile für die Kommunikationsprofilfamilie 16
Réseaux de communication industriels - Profils -- Partie 5-16: Installation des bus de
terrain - Profils d'installation pour CPF 16
Ta slovenski standard je istoveten z: EN 61784-5-16:2013
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.40 Transportni sloj Transport layer
SIST EN 61784-5-16:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61784-5-16:2014

---------------------- Page: 2 ----------------------

SIST EN 61784-5-16:2014

EUROPEAN STANDARD
EN 61784-5-16

NORME EUROPÉENNE
December 2013
EUROPÄISCHE NORM

ICS 25.040.40; 35.100.40


English version


Industrial communication networks -
Profiles -
Part 5-16: Installation of fieldbuses -
Installation profiles for CPF 16
(IEC 61784-5-16:2013)


Réseaux de communication industriels -  Industrielle Kommunikationsnetze -
Profils - Profile -
Partie 5-16: Installation des bus de terrain - Teil 5-16: Feldbusinstallation -
Profils d'installation pour CPF 16 Installationsprofile für die
(CEI 61784-5-16:2013) Kommunikationsprofilfamilie 16
(IEC 61784-5-16:2013)





This European Standard was approved by CENELEC on 2013-10-18. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61784-5-16:2013 E

---------------------- Page: 3 ----------------------

SIST EN 61784-5-16:2014
EN 61784-5-16:2013 - 2 -
Foreword
The text of document 65C/738/FDIS, future edition 1 of IEC 61784-5-16, prepared by
SC 65C "Industrial networks" of IEC/TC 65 "Industrial-process measurement, control and automation"
was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 61784-5-16:2013.

The following dates are fixed:
• latest date by which the document has to be (dop) 2014-07-18
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-10-18
• latest date by which the national
standards conflicting with the
document have to be withdrawn

This standard is to be used in conjunction with EN 61918:2013.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 61784-5-16:2013 was approved by CENELEC as a
European Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 61784-5-16:2014
- 3 - EN 61784-5-16:2013
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendment
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.