EN 60811-502:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations

IEC 60811-502:2012 gives the test method for the shrinkage for insulations. IEC 60811-502:2012 cancels and replaces Clause 10 of IEC 60811-1-3:1993, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are no specific technical changes with respect to the previous edition, but see the Foreword to IEC 60811-100:2012. This publication is to be read in conjunction with IEC 60811-100:2012.

Kabel, isolierte Leitungen und Glasfaserkabel - Prüfverfahren für nichtmetallene Werkstoffe - Teil 502: Mechanische Prüfungen Schrumpfungsprüfung für Isolierhüllen

Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 502: Essais mécaniques - Essai de rétraction des enveloppes isolantes

La CEI 60811-502:2012 décrit la méthode d'essai relative à la rétraction des enveloppes isolantes. La CEI 60811-502:2012 annule et remplace l'Article 10 de la CEI 60811-1-3:1993, qui est supprimée. L'ensemble des informations relatives aux remplacements figure dans l'Annexe A de la CEI 60811-100:2012. Aucune modification technique n'a été effectuée par rapport à l'édition précédente; voir cependant l'avant-propos de la CEI 60811-100:2012. Cette publication doit être lue conjointement avec la CEI 60811-100:2012.

Električni in optični kabli - Preskuševalne metode za nekovinske materiale - 502. del: Mehanski preskusi - Preskus skrčenja izolacije

502. del standarda IEC 60811 navaja preskusno metodo za skrčenje izolacij.

General Information

• Status: Published
• Publication Date: 14-Jun-2012
• ICS: 29.035.01 - Insulating materials in general
• ICS: 29.060.20 - Cables
• Technical Committee: CLC/TC 20 - Electric cables
• Drafting Committee: IEC/TC 20 - IEC_TC_20
• Parallel Committee: IEC/TC 20 - IEC_TC_20
• Current Stage: 6060 - Document made available - Publishing
• Completion Date: 15-Jun-2012
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Ref Project: SIST EN 60811-502:2012 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations

Relations

• Replaces: EN 60811-1-3:1995 - Insulating and sheathing materials of electric and optical cables - Common test methods - Part 1-3: General application - Methods for determining the density - Water absorption tests - Shrinkage test
• Effective Date: 29-Jan-2023
• Replaces: EN 60811-1-3:1995/A1:2001 - Insulating and sheathing materials of electric and optical cables - Common test methods - Part 1-3: General application - Methods for determining the density - Water absorption tests - Shrinkage test
• Effective Date: 28-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kabel, isolierte Leitungen und Glasfaserkabel - Prüfverfahren für nichtmetallene Werkstoffe - Teil 502: Mechanische Prüfungen Schrumpfungsprüfung für IsolierhüllenCâbles électriques et câbles à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 502: Essais mécaniques - Essai de rétraction des enveloppes isolantesElectric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations29.060.20KabliCables29.035.01Izolacijski materiali na splošnoInsulating materials in generalICS:Ta slovenski standard je istoveten z:EN 60811-502:2012SIST EN 60811-502:2012en,fr,de01-september-2012SIST EN 60811-502:2012SLOVENSKI
STANDARD
EUROPEAN STANDARD EN 60811-502 NORME EUROPÉENNE
EUROPÄISCHE NORM June 2012
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60811-502:2012 E
ICS 29.035.01; 29.060.20 Supersedes EN 60811-1-3:1995 (partially) + A1:2001 (partially)
English version
Electric and optical fibre cables -
Test methods for non-metallic materials -
Part 502: Mechanical tests -
Shrinkage test for insulations (IEC 60811-502:2012)
Câbles électriques et à fibres optiques -
Méthodes d'essai pour les matériaux
non-métalliques -
Partie 502: Essais mécaniques -
Essai de rétraction des enveloppes isolantes (CEI 60811-502:2012)
Kabel, isolierte Leitungen
und Glasfaserkabel -
Prüfverfahren für nichtmetallene Werkstoffe -
Teil 502: Mechanische Prüfungen Schrumpfungsprüfung für Isolierhüllen (IEC 60811-502:2012)
This European Standard was approved by CENELEC on 2012-04-17. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-01-17 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2015-04-17
This document supersedes Clause 10 of EN 60811-1-3:1995 + A1:2001(partially). Full details of the replacements are shown in Annex A of EN 60811-100:2012. There are no technical changes with respect to EN 60811-1-3:1995, but see the Foreword to EN 60811-100.
This standard is to be read in conjunction with EN 60811-100.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC).
Endorsement notice The text of the International Standard IEC 60811-502:2012 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated : IEC 60811-1-3:1993 NOTE Harmonized as EN 60811-1-3:1995 (not modified).
- 3 - EN 60811-502:2012 Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year IEC 60811-100 2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General EN 60811-100 2012
IEC 60811-502 Edition 1.0 2012-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Electric and optical fibre cables – Test methods for non-metallic materials –
Part 502: Mechanical tests – Shrinkage test for insulations
Câbles électriques et à fibres optiques – Méthodes d’essai pour les matériaux non-métalliques –
Partie 502: Essais mécaniques – Essai de rétraction des enveloppes isolantes
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE H ICS 29.035.01; 29.060.20 PRICE CODE CODE PRIX ISBN 978-2-88912-976-8
– 2 – 60811-502  IEC:2012 CONTENTS FOREWORD . 3 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 6 4 Test method . 6 4.1 General . 6 4.2 Test equipment . 6 4.3 Sampling . 6 4.4 Preparation of test pieces . 6 4.5 Test procedure . 7 4.6 Expression of results . 7 5 Test report. 7
60811-502  IEC:2012 – 3 – INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
ELECTRIC AND OPTICAL FIBRE CABLES –
TEST METHODS FOR NON-METALLIC MATERIALS –
Part 502: Mechanical tests –
Shrinkage test for insulations
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechni
...