EN 61754-7:2008

Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7: Type MPO connector family

IEC 61754-7:2008(E) defines the standard interface dimensions for type MPO family of connectors. Specific technical changes in this edition involve the addition of an aligned key adaptor interface definition to address all existing MPO applications.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Steckgesichter von Lichtwellenleiter-Steckverbindern - Teil 7: Steckverbinderfamilie der Bauart MPO

Dispositifs d'interconnexion et composants passifs à fibres optiques - Interfaces de connecteurs pour fibres optiques - Partie 7: Famille de connecteurs de type MPO

L'IEC 61754-7:2008 définit les dimensions d'interface normalisées pour la famille de connecteurs de type MPO. Cette troisième édition annule et remplace la deuxième édition parue en 2004. Cette troisième édition constitue une révision technique. Les modifications techniques spécifiques incluent l'ajout de la définition d'une interface de raccord à détrompeur aligné pour couvrir l'ensemble des applications MPO existantes. Mots clés: dimensions d'interface normalisées pour la famille de connecteurs de type MPO

Spojni vmesniki optičnih vlaken - 7. del: Družina spojnikov tipa MPO (IEC 61754-7:2008)

General Information

• Status: Withdrawn
• Publication Date: 19-Jun-2008
• Withdrawal Date: 31-Mar-2011
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Parallel Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 17-Jan-2019
• Ref Project: SIST EN 61754-7:2008 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces -- Part 7: Type MPO connector family

Relations

• Replaces: EN 61754-7:2005 - Fibre optic connector interfaces - Part 7: Type MPO connector family
• Effective Date: 29-Jan-2023
• Split Into: EN IEC 61754-7-2:2018 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-2: Type MPO connector family - Two fibre rows
• Effective Date: 29-Jan-2023
• Replaced By: EN 61754-7-1:2014 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-1: Type MPO connector family - One fibre row
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61754-7:2008
01-september-2008
1DGRPHãþD
SIST EN 61754-7:2005
6SRMQLYPHVQLNLRSWLþQLKYODNHQGHO'UXåLQDVSRMQLNRYWLSD032,(&

Fibre optic connector interfaces - Part 7: Type MPO connector family (IEC 61754-
7:2008)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Steckgesichter von
Lichtwellenleiter-Steckverbindern - Teil 7: Steckverbinderfamilie der Bauart MPO (IEC
61754-7:2008)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Interfaces de
connecteurs pour fibres optiques - Partie 7: Famille de connecteurs de type MPO (CEI
61754-7:2008)
Ta slovenski standard je istoveten z: EN 61754-7:2008
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61754-7:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61754-7:2008

---------------------- Page: 2 ----------------------

SIST EN 61754-7:2008

EUROPEAN STANDARD
EN 61754-7

NORME EUROPÉENNE
June 2008
EUROPÄISCHE NORM

ICS 33.180.20 Supersedes EN 61754-7:2005


English version


Fibre optic interconnecting devices and passive components -
Fibre optic connector interfaces -
Part 7: Type MPO connector family
(IEC 61754-7:2008)


Dispositifs d'interconnexion  Lichtwellenleiter -
et composants passifs à fibres optiques - Verbindungselemente
Interfaces de connecteurs und passive Bauteile -
pour fibres optiques - Steckgesichter von
Partie 7: Famille de connecteurs Lichtwellenleiter-Steckverbindern -
de type MPO Teil 7: Steckverbinderfamilie
(CEI 61754-7:2008) der Bauart MPO
(IEC 61754-7:2008)




This European Standard was approved by CENELEC on 2008-04-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61754-7:2008 E

---------------------- Page: 3 ----------------------

SIST EN 61754-7:2008
EN 61754-7:2008 - 2 -
Foreword
The text of document 86B/2581/CDV, future edition 3 of IEC 61754-7, prepared by SC 86B, Fibre optic
interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61754-7 on 2008-04-01.
This European Standard supersedes EN 61754-7:2005.
Specific technical changes involve the addition of an aligned key adaptor interface definition to address all
existing MPO applications
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-04-01
The International Electrotechnical Commission (IEC) and CENELEC draw attention to the fact that it is claimed that compliance with
this document may involve the use of a patent concerning MPO connectors.
The IEC and CENELEC take no position concerning the evidence, validity and scope of this patent right.
The holder of this patent right has assured the IEC that he/she is willing to negotiate licences under reasonable and non-
discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holder of this patent
right is registered with the IEC. Information may be obtained from:
Intellectual Property Department,
Nippon Telegraph and Telephone Corporation,
20-2 Nishi-shinjuku 3-Chome Shinjukuku,
Tokyo 163-14, Japan.
Attention is drawn to the possibility that some of t
...