EN 60684-3-209:2003
(Main)Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 209: Heat-shrinkable polyolefin sleeving, general purpose, flame retarded, shrink ratio 2:1
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 209: Heat-shrinkable polyolefin sleeving, general purpose, flame retarded, shrink ratio 2:1
Gives the requirements for one type of general purpose, flexible, flame retarded, heat-shrinkable polyolefin sleeving with a nominal minimum shrink ratio of 2:1. This sleeving has been found suitable for use at temperatures up to 125 °C. It is normally available in internal diameters up to 102 mm as supplied and in the following colours: black, brown, white, red, yellow, green, blue, orange, violet, grey and yellow/green. Sizes, shrink ratios or colours other than those specifically listed in this standard may be available as custom items. These items are considered to comply with this standard if they comply with the property requirements listed in Tables 2 and 3, excluding dimensions. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. This edition includes the following significant technical changes from the previous edition: it reverts to the metric equivalent of the established imperial size range and aligns the requirements with the 2nd edition of EN 60684-2.
Isolierschläuche - Teil 3: Anforderungen für einzelne Schlauchtypen - Blatt 209: Wärmeschrumpfende Polyolefinschläuche, flammwidrig, Standardtyp, Schrumpfverhältnis 2:1
Gaines isolantes souples - Partie 3: Spécifications pour types particuliers de gaines - Feuille 209: Gaines thermorétractables en polyoléfine, d'utilisation générale, retardées à la flamme, rapport de rétreint 2:1
Donne les prescriptions relatives à un type de gaines souples thermorétractables, en polyoléfine, d'utilisation générale, retardée à la flamme, avec un rapport de rétreint nominal minimal de 2:1. Cette gaine est adaptée pour un usage à des températures allant jusqu'à 125 °C. Cette gaine est normalement fournie avec des diamètres intérieurs allant jusqu'à 102 mm et dans les couleurs suivantes: noir, brun, blanc, rouge, jaune, vert, bleu, orange, violet, gris et jaune/vert. D'autres dimensions, d'autres couleurs ou d'autres rapports de rétreint que ceux spécifi-quement indiqués dans cette norme peuvent être disponibles comme articles spéciaux. Ces articles sont considérés comme satisfaisants à cette norme s'ils satisfont aux caractéristiques indiquées dans les Tableaux 2 et 3 à l'exclusion des dimensions. Les matériaux conformes à cette spécification satisfont à des niveaux établis de performance. Cependant, il convient que le choix d'un matériau par un utilisateur pour une application spécifique soit fondé sur les exigences réelles nécessaires pour une performance adéquate de cette application, et non fondé sur cette seule spécification. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: elle retourne à l'équivalent métrique de la gamme établie de dimensions du système impérial et s'aligne sur les exigences de la deuxième édition de la EN 60684-2.
Gibke izolacijske cevi - 3. del: Specifikacije za posamezne tipe cevi - 209. list: Toplotno skrčljive splošnonamenske poliolefinske cevi, ognjevarne, razmerje krčenja 2:1 (IEC 60684-3- 209:2003)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60684-3-209:2004
STANDARD
september 2004
Gibke izolacijske cevi - 3. del: Specifikacije za posamezne tipe cevi - 209. list:
Toplotno skrčljive splošnonamenske poliolefinske cevi, ognjevarne, razmerje
krčenja 2:1 (IEC 60684-3- 209:2003)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving -
Sheet 209: Heat- shrinkable polyolefin sleeving, general purpose, flame retarded,
shrink ratio 2:1 (IEC 60684-3- 209:2003)
ICS 29.035.20 Referenčna številka
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
EUROPEAN STANDARD EN 60684-3-209
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2003
ICS 29.035.20 Supersedes HD 523.3.209 S1:1989
English version
Flexible insulating sleeving
Part 3: Specifications for individual types of sleeving
Sheet 209: Heat-shrinkable polyolefin sleeving, general purpose,
flame retarded, shrink ratio 2:1
(IEC 60684-3-209:2003)
Gaines isolantes souples Isolierschläuche
Partie 3: Spécifications pour types Teil 3: Anforderungen für einzelne
particuliers de gaines Schlauchtypen
Feuille 209: Gaines thermorétractables Blatt 209: Wärmeschrumpfende
en polyoléfine, d'utilisation générale, Polyolefinschläuche, flammwidrig,
retardées à la flamme, Standardtyp, Schrumpfverhältnis 2:1
rapport de rétreint 2:1 (IEC 60684-3-209:2003)
(CEI 60684-3-209:2003)
This European Standard was approved by CENELEC on 2003-04-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60684-3-209:2003 E
Foreword
The text of document 15C/1432/FDIS, future edition 2 of IEC 60684-3-209, prepared by SC 15C,
Specifications, of IEC TC 15, Insulating materials, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 60684-3-209 on 2003-04-01.
This European Standard supersedes HD 523.3.209 S1:1989.
This European Standard includes the following significant technical changes from the Harmonization
Document: it reverts to the metric equivalent of the established imperial size range and aligns the
requirements with EN 60684-2:1997.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-04-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60684-3-209:2003 was approved by CENELEC as a
European Standard without any modification.
__________
- 3 - EN 60684-3-209:2003
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60684-1 1980 Specification for flexible insulating EN 60684-1 1995
sleeving
Part 1: Definitions and general
requirements
IEC 60684-2 1997 Part 2: Methods of test EN 60684-2 1997
IEC 60757 1983 Code for designation of colours HD 457 S1 1985
NORME CEI
INTERNATIONALE IEC
60684-3-209
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2003-03
Gaines isolantes souples –
Partie 3:
Spécifications pour types particuliers de gaines –
Feuille 209: Gaines thermorétractables
en polyoléfine, d'utilisation générale,
retardées à la flamme, rapport de rétreint 2:1
Flexible insulating sleeving –
Part 3:
Specifications for individual types of sleeving –
Sheet 209: Heat-shrinkable polyolefin sleeving,
general purpose, flame retarded, shrink ratio 2:1
IEC 2003 Droits de reproduction réservés Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
H
Commission Electrotechnique Internationale PRICE CODE
International Electrotechnical Commission
Международная Электротехническая Комиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue
60684-3-209 IEC:2003 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
FLEXIBLE INSULATING SLEEVING –
Part 3: Specifications for individual types of sleeving –
Sheet 209: Heat-shrinkable polyolefin sleeving,
general purpose, flame retarded, shrink ratio 2:1
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of the IEC on technical matters, express as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the correspondi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.