iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 62496-2-2:2011

(Main)

Optical circuit boards - Part 2-2: Measurements - Dimensions of optical circuit boards

Optical circuit boards - Part 2-2: Measurements - Dimensions of optical circuit boards

IEC 62496-2-2:2011 specifies the measurement procedures for dimensions related to interface information of optical circuit boards (OCB), defined in IEC 62496-4.

Optische Leiterplatten - Teil 2-2: Messungen - Abmessungen optischer Leiterplatten

Cartes à circuits optiques - Partie 2-2: Mesures - Dimensions des cartes à circuits optiques

La CEI 62496-2-2:2011 spécifie les méthodes de mesure pour les dimensions liées aux informations d'interface des cartes à circuits optiques (OCB), définies dans la CEI 62496-4.

Plošče z optičnimi vezji - Preskusni in merilni postopki - 2-2. del: Meritve: Mere plošč z optičnimi vezji (IEC 62496-2-2:2011)

Ta del IEC 62496 določa merilne postopke za mere, povezane z informacijami o vmesnikih za plošče z optičnimi vezji (OCB), opredeljenimi v IEC 62496-4.

General Information

Status
Published
Publication Date
03-Mar-2011
Withdrawal Date
02-Mar-2014
ICS
33.180.01 - Fibre optic systems in general
Technical Committee
CLC/SR 86 - Fibre optics
Drafting Committee
IEC/TC 86 - IEC_TC_86
Parallel Committee
IEC/TC 86 - IEC_TC_86
Current Stage
6060 - Document made available - Publishing
Start Date
04-Mar-2011
Completion Date
04-Mar-2011
Ref Project
SIST EN 62496-2-2:2011 - Optical circuit boards - Test and measurement procedures - Part 2-2: Measurements: Dimensions of optical circuit boards (IEC 62496-2-2:2011)

Buy Standard

EN 62496-2-2:2011 - BARVEEN 62496-2-2:2011 - BARVE
PreviousNext
Standard
EN 62496-2-2:2011 - BARVE
English language
30 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62496-2-2:2011
01-maj-2011
3ORãþH]RSWLþQLPLYH]ML3UHVNXVQLLQPHULOQLSRVWRSNLGHO0HULWYH0HUH
SORãþ]RSWLþQLPLYH]ML ,(&
Optical circuit boards - Test and measurement procedures - Part 2-2: Measurements:
Dimensions of optical circuit boards (IEC 62496-2-2:2011)
Optische Leiterplatten - Prüf- und Messverfahren - Teil 2-2: Messverfahren -
Abmessungen optischer Leiterplatten (IEC 62496-2-2:2011)
Cartes à circuits optiques - Partie 2-2: Mesures - Dimensions des cartes à circuits
optiques (CEI 62496-2-2:2011)
Ta slovenski standard je istoveten z: EN 62496-2-2:2011
ICS:
31.180 7LVNDQDYH]MD 7,9 LQWLVNDQH Printed circuits and boards
SORãþH
33.180.01 6LVWHPL]RSWLþQLPLYODNQLQD Fibre optic systems in
VSORãQR general
SIST EN 62496-2-2:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62496-2-2:2011

---------------------- Page: 2 ----------------------

SIST EN 62496-2-2:2011

EUROPEAN STANDARD
EN 62496-2-2

NORME EUROPÉENNE
March 2011
EUROPÄISCHE NORM

ICS 33.180.01


English version


Optical circuit boards -
Part 2-2: Measurements -
Dimensions of optical circuit boards
(IEC 62496-2-2:2011)


Cartes à circuits optiques -  Optische Leiterplatten -
Partie 2-2: Mesures - Teil 2-2: Messungen -
Dimensions des cartes à circuits optiques Abmessungen optischer Leiterplatten
(CEI 62496-2-2:2011) (IEC 62496-2-2:2011)




This European Standard was approved by CENELEC on 2011-03-03. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62496-2-2:2011 E

---------------------- Page: 3 ----------------------

SIST EN 62496-2-2:2011
EN 62496-2-2:2011 - 2 -
Foreword
The text of document 86/378/FDIS, future edition 1 of IEC 62496-2-2, prepared by IEC TC 86, Fibre
optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 62496-2-2 on 2011-03-03.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2011-12-03
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2014-03-03
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62496-2-2:2011 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60793-2 NOTE  Harmonized as EN 60793-2.
IEC 62496 series NOTE  Harmonized in EN 62496 series.
__________

---------------------- Page: 4 ----------------------

SIST EN 62496-2-2:2011
- 3 - EN 62496-2-2:2011

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60068-1 - Environmental testing - EN 60068-1 -
Part 1: General and guidance


IEC 60793-1-45 - Optical fibres - EN 60793-1-45 -
(mod) Part 1-45: Measurement methods and test
p
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 61744:2023(Main)
Calibration of fibre optic chromatic dispersion test sets
SIST EN IEC 61744:2023

IEC 61744:2023 provides standard procedures for the calibration of optical fibre chromatic dispersion (CD) test sets. This document is applicable to all types of CD test sets, with the exception that measurements on multimode optical fibres are excluded. The purpose of this document is to define a standard procedure for calibrating optical fibre chromatic dispersion (CD) test sets. The detailed calibration steps used vary according to the measurement technique used in the CD test set. Whilst it is acknowledged that chromatic dispersion also occurs in multimode fibre and this fibre can be measured on many CD test sets, this document will restrict discussion to single mode fibre measurements applications only. The purpose of the procedures outlined in this document is to focus manufacturers and users of CD test sets toward the reduction of measurement uncertainty in chromatic dispersion determination in optical fibres under all applicable conditions. The procedures apply to calibration laboratories and to the manufacturers or users of CD test sets for the purpose of a) calibrating CD test sets, and b) evaluating the level of performance of the instrument. Use of the procedures also allows correct evaluation of CD test set uncertainty, relative and traceable to appropriate (for example, national) standards. This third edition cancels and replaces the second edition published in 2005. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) updated terms and definitions; b) the use of a reference fibre standard for calibration is now allowed and at the same level as the other calibration method; c) Annex B was split into a new Annex B (on calibration uncertainty, still normative) and a new Annex C (on uncertainty at operating conditions, informative); d) removed former C.3.4 on interferometric method since this method is no longer supported in IEC 60793-1-42; e) removed Annex D and other references in text to calibration compensation to align with other calibration documents; f) removed Annex E and other references in text to use of air wavelength since it is not used in the fibre domain.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62496-2-5:2023(Main)
Optical circuit boards - Basic test and measurement procedures - Part 2-5: Flexibility test for flexible opto-electric circuits
SIST EN IEC 62496-2-5:2023

This part of IEC 62496-2 defines a test method for folding flexibility inspection of flexible opto-electric circuits with a MIT folding endurance tester and presents a guideline for a step stress test method for finding the predetermined minimum mechanical folding radii below which the flexible opto-electric circuits can be damaged by intended folding distortion. Here, test samples are used instead of products for the flexibility test of their flexible opto-electric circuits, and the test samples have the same layer structure as the products.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62496-4-214:2020(Main)
Optical circuit boards - Part 4-214: Interface standards - Terminated waveguide OCB assembly using a single-row thirty-two-channel symmetric PMT connector
SIST EN IEC 62496-4-214:2020

IEC 62496-4-214: 2020 defines the standard interface dimensions for a terminated waveguide optical circuit board (OCB) assembly (referred to simply as "assembly") using single-row thirty-two-channel connectors for polymer waveguides connected with a symmetric PMT connector.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62129-3:2019(Main)
Calibration of wavelength/optical frequency measurement instruments - Part 3:Optical frequency meters internally referenced to a frequency comb
SIST EN IEC 62129-3:2019

IEC 62129-3:2019 describes the calibration of optical frequency meters using an optical frequency comb as an internal reference. It is applicable to instruments measuring the optical frequency emitted from sources that are typical for the fibre-optic communications industry. It is assumed that the optical radiation will be coupled to the optical frequency meter by a single-mode optical fibre. This document is part of the IEC 62129 series on the calibration of wavelength/optical frequency measurement instruments. Refer to IEC 62129­1 [3] for the calibration of optical spectrum analyzers, and refer to IEC 62129-2 [4] for calibration of Michelson interferometer single wavelength meters. This first edition cancels and replaces IEC TS 62129-3, published in 2014. This edition includes the following significant technical changes with respect to the previous edition: a) text has been added to 5.2.3 about calibration at a second optical frequency; b) Annex D is now normative; c) Subclause 4.2 has been improved; d) measurement method of frequency has been moved to Annex B; e) example of optical frequency comb has been moved to Annex C; f) frequency-dependence uncertainty has been moved to Annex D. Keywords: calibration of optical frequency meters

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62496-4-1:2019(Main)
Optical circuit boards - Part 4-1: Interface standards - Terminated waveguide OCB assembly using single-row twelve-channel PMT connectors
SIST EN IEC 62496-4-1:2019

This part of IEC 62496-4 defines the standard interface dimensions for a terminated waveguide optical circuit board (OCB) assembly (referred to simply as assembly) using single-row twelvechannel polymer waveguides for a PMT connector and a waveguide OCB that can be interconnected with a terminated MT ferrule.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61745:2017(Main)
End-face image analysis procedure for the calibration of optical fibre geometry test sets
SIST EN 61745:2018

IEC 61745:2017 describes the calibration of test sets that perform end-face image analysis, also known as "near-field" or "grey-scale" analysis. The principles, however, can be applied to test sets of a different type. The procedures outlined are performed by calibration laboratories and by the manufacturers or users of geometry test sets, for the purpose of calibrating geometry test sets and for evaluating the uncertainties in measurements made on calibrated test sets. The calibration of fibre coating or cable measurement test sets is not covered by this document. This second edition cancels and replaces the first edition, published in 1998, and constitutes a technical revision.This edition includes the following significant technical changes with respect to the previous edition: a) removal of the limitation of single mode optical fibre geometry test sets to include multimode; b) addition of a new annex as mathematical basis. Keywords: end-face image analysis, optical fibre geometry test sets

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62496-2:2017(Main)
Optical circuit boards - Basic test and measurement procedures - Part 2: General guidance for definition of measurement conditions for optical characteristics of optical circuit boards
SIST EN 62496-2:2017

IEC 62496-2:2017(E) specifies a method of defining the conditions for measurements of optical characteristics of optical circuit boards. The method comprises the use of code reference look-up tables to identify different critical aspects of the measurement environment. The values extracted from the tables are used to construct a measurement identification code, which, in itself, captures sufficient information about the measurement conditions, so as to ensure consistency of independently measured results within an acceptable margin. Recommended measurement conditions are specified to minimise further variation in independently measured results. Keywords: bandwidth density, optical characteristics of optical circuit boards

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62129-1:2016(Main)
Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers
SIST EN 62129-1:2017

IEC 62129-1:2016 specifies procedures for calibrating an optical spectrum analyzer that is developed for use in fibre-optic communications and designed to measure the power distribution of an optical spectrum. It does not apply to an optical wavelength meter that measures only centre wavelengths, a Fabry-Perot interferometer or a monochromator that has no display unit. This first edition of IEC 62129-1 cancels and replaces the first edition of IEC 62129, published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - update of term and definitions; - update of calibration conditions; - calculation change of uncertainties related to wavelength temperature dependence, power linearity, power level temperature dependence; - move of Annex E to the bibliography. Keywords: calibrating an optical spectrum analyser

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61746-1:2011/AC:2014(Corrigendum)
Calibration of optical time-domain reflectometers (OTDR) - Part 1: OTDR for single-mode fibres
SIST EN 61746-1:2011/AC:2014

This part of IEC 61746 provides procedures for calibrating single-mode optical time domain reflectometers (OTDR). It only covers OTDR measurement errors and uncertainties. This standard does not cover correction of the OTDR response.

  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61746-2:2011/AC:2014(Corrigendum)
Calibration of optical time-domain reflectometers (OTDR) - Part 2: OTDR for multimode fibres
SIST EN 61746-2:2011/AC:2014

This part of IEC 61746 provides procedures for calibrating multimode optical time domain reflectometers (OTDR). It covers OTDR measurement errors and uncertainties. The test of the laser(s) source modal condition is included as an optional measurement. This standard does not cover correction of the OTDR response.

  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day