EN 61076-2-001:2011

Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification

IEC 61076-2-001:2011 This blank detail product specification is a supplementary document to the sectional product specification IEC 61076-2 and contains requirements for style, layout and content of detail product specifications for circular connectors. It should be used in conjunction with the following publications: IEC 61076-1 and IEC 61076-2 for product requirements as well as IEC 62197-1 for quality requirements. The sample pages can be used like a template when preparing a detail product specification within the scope of this document. This document is not intended to replace the templates and guidance notes of IEC, but to assist in their application. All users are reminded to adhere to relevant directives and guidelines of the IEC when preparing a standard. This second editon cancels and replaces the first edition of IEC 61076-2-001 (2001). This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - This International Standard no longer includes the quality assessment procedures. As described in IEC 61076-1 and IEC 62197-1, a new document structure has been established. IEC 61076-2-001 has been revised to reflect this updated structure. - Subclause 3.2, Systems of levels has been introduced. - The subclause IEC type designation has been removed. - Clauses 4 Dimensional information and 5 Characteristics have been added. - Some clauses and test groups have been rearranged. Test group HP has been added.

Steckverbinder für elektronische Einrichtungen - Produktanforderungen - Teil 2-001: Rundsteckverbinder - Vordruck für Bauartspezifikation

Connecteurs pour équipements électroniques - Exigences de produit - Partie 2-001: Connecteurs circulaires - Spécification particulière cadre

La CEI 61076-2-001:2011 La présente spécification particulière cadre de produit est un document qui complète la spécification intermédiaire de produit CEI 61076-2 et contient des exigences pour le modèle, la présentation et le contenu des spécifications particulières de produit pour les connecteurs circulaires. Il convient qu'elle soit utilisée dans la conjonction avec les publications suivantes: la CEI 61076-1 et la CEI 61076-2 pour les exigences de produit ainsi que la CEI 62197-1 pour les exigences de qualité. Les pages d'échantillon peuvent être servir de modèle lors de la préparation d'une spécification particulière de produit couverte par le présent document. Le présent document n'est pas destiné à remplacer les modèles ni les guides de présentation de la CEI, mais à aider à les utiliser. Il est rappelé à tous les utilisateurs de respecter les directives et les lignes directrices applicables de la CEI lors de la préparation d'une norme. La présente Norme internationale annule et remplace la première édition de la CEI 61076-2-001 (2001). Cette édition constitue une révision technique. La présente édition contient les importantes modifications techniques suivantes par rapport à la précédente édition: - La présente Norme internationale ne contient pas les procédures d'assurance de la qualité. Comme cela est décrit dans les normes CEI 61076-1 et CEI 62197-1, une nouvelle structure de document a été établie. La CEI 61076-2-001 a été révisée pour refléter cette structure mise à jour. - Le paragraphe 3.2, Systèmes de niveaux a été ajouté. - Le paragraphe Désignation de type CEI a été retiré. - Les Articles 4 Informations dimensionnelles et 5 Caractéristiques ont été ajoutés. - Certains Articles et groupes d'essai ont été réorganisés. Le groupe d'essai HP a été ajouté.",PE

Konektorji za elektronsko opremo - Zahteve za izdelke - 2-001. del: Okrogli konektorji - Okvirna podrobna specifikacija

Poleg navedenih dokumentov so lahko potrebni sklici na druge dokumente in v tem primeru se povezani dokumenti razširijo prek navedenih. Če so narejeni sklici na standarde, ki so že navedeni v IEC 61076-1 in IEC 61076-2, se sklici v točki 1.2 podrobne specifikacije izdelka ne ponovijo.

General Information

• Status: Published
• Publication Date: 18-Aug-2011
• Withdrawal Date: 25-Jul-2014
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: CLC/SR 48B - Connectors
• Drafting Committee: IEC/SC 48B - IEC_SC_48B
• Parallel Committee: IEC/SC 48B - IEC_SC_48B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 19-Aug-2011
• Completion Date: 19-Aug-2011
• Ref Project: SIST EN 61076-2-001:2011 - Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification

Relations

• Replaces: EN 61076-2-001:2001 - Connectors for electronic equipment - Part 2-001: Circular connectors - Blank detail specification
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2011
Konektorji za elektronsko opremo - Zahteve za izdelke - 2-001. del: Okrogli
konektorji - Okvirna podrobna specifikacija
Connectors for electronic equipment - Product requirements - Part 2-001: Circular
connectors - Blank detail specification
Connecteurs pour équipements électroniques - Exigences de produit - Partie 2-001:
Connecteurs circulaires - Spécification particulière-cadre
Ta slovenski standard je istoveten z: EN 61076-2-001:2011
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61076-2-001
NORME EUROPÉENNE
August 2011
EUROPÄISCHE NORM
ICS 31.220.10 Supersedes EN 61076-2-001:2001

English version
Connectors for electronic equipment -
Product requirements -
Part 2-001: Circular connectors -
Blank detail specification
(IEC 61076-2-001:2011)
Connecteurs pour équipements Steckverbinder für elektronische
électroniques - Einrichtungen -
Exigences de produit - Produktanforderungen -
Partie 2-001: Connecteurs circulaires - Teil 2-001: Rundsteckverbinder -
Spécification particulière cadre Vordruck für Bauartspezifikation
(CEI 61076-2-001:2011) (IEC 61076-2-001:2011)

This European Standard was approved by CENELEC on 2011-07-26. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61076-2-001:2011 E

Foreword
The text of document 48B/2241/FDIS, future edition 2 of IEC 61076-2-001, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 61076-2-001 on 2011-07-26.
This European Standard supersedes EN 61076-2-001:2001.
EN 61076-2-001:2001:
a) This European Standard no longer includes the quality assessment procedures. As described in
EN 61076-1 and EN 62197-1, a new document structure has been established. EN 61076-2-001 has
been revised to reflect this updated structure.
b) Subclause 3.2, Systems of levels has been introduced.
c) The subclause IEC type designation has been removed.
d) Clauses 4 Dimensional information and 5 Characteristics have been added.
e) Some clauses and test groups have been rearranged. Test group HP has been added.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2012-04-26
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2014-07-26
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61076-2-001:2011 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60664-1 NOTE  Harmonized as EN 60664-1.
__________
- 3 - EN 61076-2-001:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60068-1 - Environmental testing - EN 60068-1 -
Part 1: General and guidance
IEC 60352 Series Solderless connections EN 60352 Series

IEC 60512 Series Connectors for electronic equipment - Tests EN 60512 Series
and measurements
IEC 60512-1 - Connectors for electronic equipment - Tests EN 60512-1 -
and measurements -
Part 1: General
IEC 60512-1-100 - Connectors for electronic equipment - Tests EN 60512-1-100 -
and measurements -
Part 1-100: General - Applicable publications

IEC 60999-1 - Connecting devices - Electrical copper EN 60999-1 -
conductors - Safety requirements for screw-
type and screwless-type clamping units -
Part 1: General requirements and particular
requirements for clamping units for conductors
from 0,2 mm² up to 35 mm² (included)

IEC 60999-2 - Connecting devices - Electrical copper EN 60999-2 -
conductors - Safety requirements for screw-
type and screwless-type clamping units -
Part 2: Particular requirements for clamping
units for conductors above 35 mm² up to 300
mm² (included)
IEC 61076-1 2006 Connectors for electronic equipment - EN 61076-1 2006
Product requirements -
Part 1: Generic specification
IEC 61076-2 2011 Connectors for electronic equipment - EN 61076-2 2011
Product requirements -
Part 2: Sectional specification for circular
connectors
IEC 62197-1 - Connectors for electronic equipment - Quality EN 62197-1 -
assessment requirements -
Part 1: Generic specification
IEC 61076-2-001 ®
Edition 2.0 2011-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Connectors for electronic equipment – Product requirements –
Part 2-001: Circular connectors – Blank detail specification

Connecteurs pour équipements électroniques – Exigences de produit –
Partie 2-001: Connecteurs circulaires – Spécification particulière cadre

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XC
ICS 31.220.10 ISBN 978-2-88912-561-6

– 2 – 61076-2-001  IEC:2011
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 9
2 Normative references . 11
3 Technical information . 13
3.1 Terms and definitions . 13
3.2 Systems of levels . 13
3.2.1 Performance levels . 13
3.2.2 Compatibility levels, according to IEC 61076-1 Ed. 2.0 . 13
3.3 Classification into climatic categories . 13
3.4 Creepage and clearance distances . 15
3.5 Current-carrying capacity . 15
3.6 Marking . 15
4 Dimensional information . 17
4.1 General . 17
4.2 Isometric view and common features . 17
4.2.1 Common features . 19
4.2.2 Reference system . 19
4.3 Engagement (mating) information . 21
4.3.1 Engaging (mating) direction . 21
4.3.2 Perpendicular to the engaging (mating) direction . 21
4.3.3 Inclination . 21
4.4 Fixed connectors . 21
4.4.1 Dimensions . 21
4.4.2 Terminations . 21
4.5 Free connectors . 23
4.5.1 Dimensions . 23
4.5.2 Terminations . 23
4.6 Accessories . 23
4.7 Mounting information for connectors . 23
4.7.1 Mounting on panels . 25
4.8 Gauges . 25
4.8.1 Sizing gauges and retention force gauges . 25
4.8.2 Mechanical function, engaging/separating/insertion/withdrawal force
gauges . 27
4.8.3 Probes . 27
4.8.4 Contact resistance gauge . 27
4.8.5 Test panel (for voltage proof test) . 27
4.8.6 Test panel (for EMC/ crosstalk etc.) . 27
5 Characteristics . 29
5.1 General . 29
5.2 Pin assignment and other definitions . 29
5.3 Classification into climatic categories . 29
5.4 Electrical characteristics . 29
5.4.1 Creepage and clearance distances . 29
5.4.2 Voltage proof . 31

61076-2-001  IEC:2011 – 3 –
5.4.3 Current-carrying capacity. 31
5.4.4 Contact and shield resistance . 31
5.4.5 Insulation resistance . 31
5.4.6 Impedance. 33
5.5 Mechanical characteristics . 35
5.5.1 Mechanical operation . 35
5.5.2 Effectiveness of connector coupling devices . 35
5.5.3 Engaging and separating forces (or insertion and withdrawal forces) . 35
5.5.4 Contact retention in insert . 35
5.5.5 Polarizing and coding method . 35
5.6 Other characteristics .
...