EN 61290-1-3:2005
(Main)Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
This International Standard applies to all commercially available optical amplifiers (OA) and optically amplified subsystems. It applies to OA using optically pumped fibres (OFA based on either rare-earth doped fibres or on the Raman effect), semiconductors (SOA), and waveguides (POWA).
Prüfverfahren für Lichtwellenleiter-Verstärker - Teil 1-3: Optische Leistungs- und Verstärkerparameter - Verfahren mit optischem Leistungsmesser
Amplificateurs optiques - Méthodes d'essai - Partie 1-3: Paramètres de puissance et de gain - Méthode du wattmètre optique
La présente partie de la CEI 61290 s'applique à tous les amplificateurs optiques (AO) et sous-systèmes à amplification optique, disponibles sur le marché. Elle s'applique aux AO utilisant des fibres pompées optiquement (AFO basé sur des fibres dopées aux terres rares ou sur l'effet Raman), des semiconducteurs (SOA), et des guides d'ondes (POWA).
Optični ojačevalniki – Preskusne metode – 1-3. del: Parametri moči in ojačenja – Metoda z merilnikom optične moči (EC 61290-1-3:2005)
General Information
Relations
Standards Content (Sample)
SIST EN 61290-1-3:2006SLOVENSKImarec 2006
STANDARDOptični ojačevalniki – Preskusne metode – 1-3. del: Parametri moči in ojačenja – Metoda z merilnikom optične moči (EC 61290-1-3:2005)Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method (EC 61290-1-3:2005)©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 61290-1-3:2006(en)ICS33.180.30
EUROPEAN STANDARD
EN 61290-1-3 NORME EUROPÉENNE EUROPÄISCHE NORM
December 2005 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61290-1-3:2005 E
ICS 33.180.30 Supersedes EN 61290-1-3:1998
English version
Optical amplifiers -
Test methods Part 1-3: Power and gain parameters -
Optical power meter method (IEC 61290-1-3:2005)
Amplificateurs optiques -
Méthodes d'essai Partie 1-3: Paramètres de puissance optique et de gain -
Méthode du wattmètre optique (CEI 61290-1-3:2005)
Prüfverfahren
für Lichtwellenleiter-Verstärker Teil 1-3: Optische Leistungs-
und Verstärkerparameter -
Verfahren mit optischem
Leistungsmesser (IEC 61290-1-3:2005)
This European Standard was approved by CENELEC on 2005-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EN 61290-1-3:2005 - 2 - Foreword The text of document 86C/673/FDIS, future edition 2 of IEC 61290-1-3, prepared by SC 86C, Fibre optic systems and active devices, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61290-1-3 on 2005-10-01. This European Standard supersedes EN 61290-1-3:1998. It includes the following significant changes: a) optical power and gain parameters are both included;
b) the applicability has been extended to all commercially available optical amplifiers – not just optical fibre amplifiers. This standard is to be read in conjunction with EN 61291-1. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2006-08-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2008-10-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 61290-1-3:2005 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60793-1-1 NOTE Harmonized as EN 60793-1-1:2003 (not modified). IEC 60825-1 NOTE Harmonized as EN 60825-1:1994 (not modified). IEC 60825-2 NOTE Harmonized as EN 60825-2:2004 (not modified). IEC 60874-1 NOTE Harmonized as EN 60874-1:1999 (not modified). IEC 61290-10-1 NOTE Harmonized as EN 61290-10-1:2003 (not modified). IEC 61290-10-2 NOTE Harmonized as EN 61290-10-2:2003 (not modified). IEC 61290-10-3 NOTE Harmonized as EN 61290-10-3:2003 (not modified). __________
- 3 - EN 61290-1-3:2005
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60793-1-40 (mod) - 1) Optical fibres Part 1-40: Measurement methods and test procedures – Attenuation
EN 60793-1-40 2003 2) IEC 61291-1 - 3) Optical fibre amplifiers Part 1: Generic specification EN 61291-1 - 3)
1)
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.