EN 60900:2012
(Main)Live working - Hand tools for use up to 1 000 V a.c. and 1 500 V d.c.
Live working - Hand tools for use up to 1 000 V a.c. and 1 500 V d.c.
IEC 60900:2012 is applicable to insulated and insulating hand tools used for working live or close to live parts at nominal voltages up to 1 000 V a.c. and 1 500 V d.c. This third edition cancels and replaces the second edition, published in 2004. This edition constitutes a technical revision and includes the following significant technical changes with regard to the previous edition: - general review of the requirements and test provisions; - preparation of the elements of evaluation of defects, and general application of IEC 61318:2007 (Ed.3); - deletion of Annexes D and E, not applicable according to IEC 61318 Ed.3; - introduction of a new normative Annex D on chronology of type tests; - and introduction of a new normative Annex F on classification of defects.
Arbeiten unter Spannung - Handwerkzeuge zum Gebrauch bis AC 1 000 V und DC 1 500 V
Travaux sous tension - Outils à main pour usage jusqu'à 1 000 V en courant alternatif et 1 500 V en courant continu
La CEI 60900:2012 est applicable aux outils à main isolés et isolants utilisés sous tension ou à proximité de parties actives sous tension, à des tensions nominales jusqu'à 1 000 V en courant alternatif et 1 500 V en courant continu. Cette troisième édition annule et remplace la deuxième édition, publiée en 2004, dont elle constitue une révision technique. Elle inclut les modifications techniques essentielles suivantes, par rapport à l'édition antérieure: - revue générale des exigences et des dispositions d'essai; - préparation des éléments d'évaluation des défauts, ainsi que l'application générale de la CEI 61318:2007 (Ed.3); - suppression des Annexe D et E qui ne sont plus applicables, en accord avec la CEI 61318 Ed.3; - introduction d'une nouvelle Annexe D normative traitant de la chronologie des essais de type; - et introduction d'une nouvelle Annexe F normative traitant de la classification des défauts.
Delo pod napetostjo - Ročna orodja za uporabo pri izmeničnih napetostih do največ 1000 V in enosmernih napetostih do 1500 V (IEC 60900:2012)
Ta mednarodni standard se uporablja za izolirana in izolirna ročna orodja za uporabo pri delu pod napetostjo ali v bližini delov pod napetostjo pri nazivnih izmeničnih napetostih do največ 1000 V in enosmernih napetostih do 1500 V. Izdelki, ki so načrtovani in izdelani v skladu s tem standardom, prispevajo k varnostiuporabnikov, če jih uporabljajo usposobljene osebe v skladu z varnimi metodami dela in navodili za uporabo (kadar je to primerno).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60900:2012
01-oktober-2012
1DGRPHãþD
SIST EN 60900:2004
'HORSRGQDSHWRVWMR5RþQDRURGMD]DXSRUDERSULL]PHQLþQLKQDSHWRVWLKGR
QDMYHþ9LQHQRVPHUQLKQDSHWRVWLKGR9 ,(&
Live working - Hand tools for use up to 1 000 V a.c. and 1 500 V d.c.
Arbeiten unter Spannung - Handwerkzeuge zum Gebrauch bis AC 1 000 V und DC 1
500 V
Travaux sous tension - Outils à main pour usage jusqu'à 1 000 V en courant alternatif et
1 500 V en courant continu
Ta slovenski standard je istoveten z: EN 60900:2012
ICS:
13.260 9DUVWYRSUHGHOHNWULþQLP Protection against electric
XGDURP'HORSRGQDSHWRVWMR shock. Live working
SIST EN 60900:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60900:2012
---------------------- Page: 2 ----------------------
SIST EN 60900:2012
EUROPEAN STANDARD
EN 60900
NORME EUROPÉENNE
August 2012
EUROPÄISCHE NORM
ICS 13.260; 29.240.20; 29.260.99 Supersedes EN 60900:2004
English version
Live working -
Hand tools for use up to 1000 V a.c. and 1500 V d.c.
(IEC 60900:2012)
Travaux sous tension - Arbeiten unter Spannung -
Outils à main pour usage jusqu'à 1000 V Handwerkzeuge zum Gebrauch bis AC
en courant alternatif et 1500 V en courant 1000 V und DC 1500 V
continu (IEC 60900:2012)
(CEI 60900:2012)
This European Standard was approved by CENELEC on 2012-07-19. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60900:2012 E
---------------------- Page: 3 ----------------------
SIST EN 60900:2012
EN 60900:2012 - 2 -
Foreword
The text of document 78/947/FDIS, future edition 3 of IEC 60900, prepared by IEC/TC 78 "Live working"
was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60900:2012.
The following dates are fixed:
(dop) 2013-04-19
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-07-19
standards conflicting with the
document have to be withdrawn
This document supersedes EN 60900:2004.
EN 60900:2012 includes the following significant technical changes with respect to EN 60900:2004:
general review of the requirements and test provisions;
preparation of the elements of evaluation of defects, and general application of EN 61318:2008;
deletion of Annexes D and E, not applicable according to EN 61318;
introduction of a new normative Annex D on chronology of type tests;
introduction of a new normative Annex F on classification of defects.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 60900:2012 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60743 NOTE Harmonized as EN 60743.
---------------------- Page: 4 ----------------------
SIST EN 60900:2012
- 3 - EN 60900:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.