EN 60900:2004
(Main)Live working - Hand tools for use up to 1 000 V a.c. and 1 500 V d.c.
Live working - Hand tools for use up to 1 000 V a.c. and 1 500 V d.c.
Applies to insulated and insulating hand tools used for working live or close to live parts at nominal voltages up to 1 000 V a.c. and 1 500 V d.c.
Arbeiten unter Spannung - Handwerkzeuge zum Gebrauch bis AC 1 000 V und DC 1 500 V
Travaux sous tension - Outils à main pour usage jusqu'à 1 000 V en courant alternatif et 1 500 V en courant continu
S'applique aux outils à main isolés et isolants utilisés sous tension ou à proximité de parties actives sous tension, de tension nominale jusqu'à 1 000 V en courant alternatif et 1 500 V en courant continu.
Delo pod napetostjo – Ročna orodja za uporabo pri izmeničnih napetostih do največ 1000 V in enosmernih napetostih do 1500 V
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60900:2004
STANDARD
september 2004
Delo pod napetostjo – Ročna orodja za uporabo pri izmeničnih napetostih do
največ 1000 V in enosmernih napetostih do 1500 V
Live working - Hand tools for use up to 1 000 V a.c. and 1 500 V d.c.
ICS 13.260 Referenčna številka
SIST EN 60900:2004(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 60900
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2004
ICS 29.260.99; 13.260; 29.240.20 Supersedes EN 60900:1993 + A1:1995 + A11:1997 + A2:2002
English version
Live working –
Hand tools for use up to 1 000 V a.c. and 1 500 V d.c.
(IEC 60900:2004)
Travaux sous tension – Arbeiten unter Spannung -
Outils à main pour usage jusqu'à Handwerkzeuge zum Gebrauch
1 000 V en courant alternatif et bis AC 1 000 V und DC 1 500 V
1 500 V en courant continu (IEC 60900:2004)
(CEI 60900:2004)
This European Standard was approved by CENELEC on 2004-03-16. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60900:2004 E
---------------------- Page: 2 ----------------------
EN 60900:2004 - 2 -
Foreword
The text of document 78/547/FDIS, future edition 2 of IEC 60900, prepared by IEC TC 78, Live
working, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60900 on 2004-03-16.
This European Standard supersedes EN 60900:1993 + A1:1995 + A11:1997 + A2:2002.
This new EN 60900
– adds requirements concerning interchangeable tools, where the used components are from
different manufacturers;
– adds requirements and test values concerning insulating tools;
– includes bit-screwdrivers;
– includes screwdrivers with screw retaining devices;
– enlarges conditioning and test possibilities of the dielectric test;
– clarifies questions concerning quality assurance and
– includes the number of the standard with the year of publication (four digits) into the marking
requirements.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-04-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60900:2004 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60743 NOTE Harmonized as EN 60743:2001 (not modified).
ISO 9001 NOTE Harmonized as EN ISO 9001:2001 (not modified).
__________
---------------------- Page: 3 ----------------------
- 3 - EN 60900:2004
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60060-1 1989 High-voltage test techniques
+ corr. March 1990 Part 1: General definitions and test HD 588.1 S1 1991
requirements
IEC 60212 1971 Standard conditions for use prior to and HD 437 S1 1984
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.