EN 62317-13:2008
(Main)Ferrite cores - Dimensions - Part 13: PQ-cores for use in power supply applications
Ferrite cores - Dimensions - Part 13: PQ-cores for use in power supply applications
IEC 62317-13:2008(E) specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of PQ-cores and low-profile PQI-cores made of ferrite, and the locations of their terminal pins on a 2,54 mm printed wiring grid in relation to the base outlines of the cores.
Ferritkerne - Maße - Teil 13: PQ-Kerne für den Einsatz in Netzteilen
Noyaux ferrites - Dimensions - Partie 13: Noyaux PQ utilisés dans des applications d’alimentation électrique
La CEI 62317-13:2008 spécifie les dimensions qui sont d'importance pour l'interchangeabilité mécanique d'une gamme préférentielle de noyaux PQ et de noyaux PQI extra plat constitués de ferrite, et les emplacements de leurs broches de sortie sur une grille aux pas de 2,54 mm d'un circuit imprimé par rapport aux encombrements de base des noyaux.
Feritna jedra - Mere - 13. del: Jedra PQ za uporabo v napajalnikih (IEC 62317-13:2008 )
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62317-13:2008
01-september-2008
Feritna jedra - Mere - 13. del: Jedra PQ za uporabo v napajalnikih (IEC 62317-
13:2008 )
Ferrite cores - Dimensions - Part 13: PQ-cores for use in power supply applications (IEC
62317-13:2008 )
Ferritkerne - Maße - Teil 13: PQ-Kerne für den Einsatz in Netzteilen (IEC 62317-
13:2008 )
Noyaux de ferrite - Dimensions - Partie 13: Noyaux PQ utilisés dans des applications
d’alimentation électrique (CEI 62317-13:2008 )
Ta slovenski standard je istoveten z: EN 62317-13:2008
ICS:
29.100.10 Magnetne komponente Magnetic components
SIST EN 62317-13:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62317-13:2008
---------------------- Page: 2 ----------------------
SIST EN 62317-13:2008
EUROPEAN STANDARD
EN 62317-13
NORME EUROPÉENNE
June 2008
EUROPÄISCHE NORM
ICS 29.100.10
English version
Ferrite cores -
Dimensions -
Part 13: PQ-cores for use in power supply applications
(IEC 62317-13:2008)
Noyaux ferrites - Ferritkerne -
Dimensions - Maße -
Partie 13: Noyaux PQ utilisés Teil 13: PQ-Kerne
dans des applications für den Einsatz in Netzteilen
d’alimentation électrique (IEC 62317-13:2008)
(CEI 62317-13:2008)
This European Standard was approved by CENELEC on 2008-05-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in two official versions (English and German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62317-13:2008 E
---------------------- Page: 3 ----------------------
SIST EN 62317-13:2008
EN 62317-13:2008 - 2 -
Foreword
The text of document 51/910/FDIS, future edition 1 of IEC 62317-13, prepared by IEC TC 51, Magnetic
components and ferrite materials, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 62317-13 on 2008-05-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-02-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-05-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62317-13:2008 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 4 ----------------------
SIST EN 62317-13:2008
- 3 - EN 62317-13:2008
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60205 - Calculation of the effective parameters of EN 60205 2006
magnetic piece parts
1) 2)
IEC 62317-1 - Ferrite cores - Dimensions - EN 62317-1 2007
Part 1: General specification
1)
Undated reference.
2)
Valid edition at date of issue.
---------------------- Page: 5 ----------------------
SIST EN 62317-13:2008
---------------------- Page: 6 ----------------------
SIST EN 62317-13:2008
IEC 62317-13
Edition 1.0 2008-04
INTERNATIONAL
STANDARD
Ferrite cores – Dimensions –
Part 13: PQ-
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.